{"product_id":"bently-nevada-330103-17-22-10-12-05-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330103-17-22-10-12-05 3300 XL 8 mm Proximity Probe","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330103-17-22-10-12-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as the primary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330103\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probe utilized to execute non-contacting shaft displacement and dynamic vibration measurements across\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 3500\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMachinery Supervisory Instrumentation platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330103\u003c\/strong\u003e: 3300 XL 8 mm Proximity Probe, 3\/8-24 UNF thread, with coaxial armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e17\u003c\/strong\u003e: Unthreaded Length option (1.7 in).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e22\u003c\/strong\u003e: Overall Case Length option (2.2 in).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10\u003c\/strong\u003e: Total Length option (1.0 meter, 3.3 feet nominal).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e12\u003c\/strong\u003e: Connector and Cable Type option (Miniature coaxial ClickLoc connector, fluid-resistant armored cable).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Agency Approval option (Multiple multi-national hazardous area certifications including ATEX\/IECEx intrinsic safety approvals).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330103-17-22-10-12-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.34 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e21.0 cm x 21.0 cm x 6.5 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSourced via connected 3300 XL Proximitor Sensor unit (-24 VDC nominal loop)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) total displacement window\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) nominal output sensitivity\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTarget Targetry\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 high-chrome steel alloy substrate\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTip Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8.0 mm nominal dimension\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Size\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF mechanical profile\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 303 stainless steel sheath construction\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 330103-17-22-10-12-05 relies on a high-frequency RF field to induce eddy currents into the target shaft surface. The system relies on precise eddy-current probe scaling tuned exactly to the physical composition of an AISI 4140 steel target. To secure optimum operational positioning relative to dynamic rotor dynamics, field calibration requires absolute gap voltage validation.\u003c\/p\u003e\n\u003cp\u003eBy mechanically micro-adjusting the probe depth within the housing until the static signal hits exactly -10 VDC targets, the system sets the measurement center at the exact median point of the 2.0 mm linear tracking envelope. When multiple 8 mm drivers are positioned within close spatial parameters on a machine bearing box, specific lateral separation limits must be maintained to provide proper cross-talk suppression and eliminate inductive overlapping between channels.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the presence of the flexible coaxial armor alter the standard 7.87 V\/mm scale factor of the transducer loop?\u003c\/p\u003e\n\u003cp\u003eA: No. The external armor serves as a mechanical protective layer for the inner FEP sleeve. It is completely isolated from the internal signal conductor and has no impact on the factory eddy-current probe scaling parameters.\u003c\/p\u003e\n\u003cp\u003eQ: What happens to the proximity loop monitoring status if the sensor cable is accidentally cut or pinched?\u003c\/p\u003e\n\u003cp\u003eA: A severed or crimped inner conductor modifies the circuit loop impedance, immediately breaking the high-frequency RF link. The paired monitoring system detects this electrical change and triggers a Transducer Fault (NOT OK) status, freezing executive trip relay actions on that channel.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 1.0-meter option 330103 probe be linked directly to a 9.0-meter extension cable assembly?\u003c\/p\u003e\n\u003cp\u003eA: No. The total electrical length of the probe and extension cable must match the calibrated length of the driver module. A 1.0-meter probe requires a 4.0-meter extension cable to complete a standard 5.0-meter system loop, or an 8.0-meter extension cable to build a 9.0-meter system loop. Mixing mismatched components corrupts the calibrated scale factor.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torque Constraints\u003c\/strong\u003e: Do not exceed the maximum allowable installation torque limit of 13.5 N-m (120 in-lb) when locking the 3\/8-24 UNF threaded body into position. Over-torquing risks structural separation of the 8 mm ceramic tip from the steel case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProximity Side-Clearance Thresholds\u003c\/strong\u003e: Maintain a flat counterbore radius of at least 15.0 mm around the centerline of the probe tip. Insufficient side clearance allows the surrounding housing metal to interfere with the magnetic flux field, shifting the scale factor calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClickLoc Connector Securing\u003c\/strong\u003e: Clean all oil film from the internal pin profiles before mating the ClickLoc coaxial connection. Lock the joint together completely by hand until a mechanical click is verified. Do not apply tools like wrenches to the miniature coupling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eArmored Cable Bend Restrictions\u003c\/strong\u003e: Maintain a minimum structural static bend radius of 25.4 mm (1.0 in) for the armored section to avoid crushing the inner core and altering loop capacitance properties.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShield Grounding Matrix\u003c\/strong\u003e: Ensure the outer metal armor remains electrically isolated from the machinery structural ground along the entire run. The loop shield must follow a strict single-point layout, routing uninterrupted back to the instrument panel earth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Packaging Manifest\u003c\/h3\u003e\n\u003cp\u003eThe standard shipping package contains the following items:\u003c\/p\u003e\n\u003col class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e(1) 330103-17-22-10-12-05 Armored Proximity Probe assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e(2) Locknuts for 3\/8-24 UNF case positioning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e(1) Fluorosilicone connector protective boot kit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e(1) Printed factory multi-point calibration verification graph.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eConsignment \u0026amp; Freight Logistics\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDispatch Timeline\u003c\/strong\u003e: 2-7 days when payment finish through established industrial financing mechanisms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTransit Forwarding\u003c\/strong\u003e: Dispatched internationally via expedited air couriers including DHL, FEDEX, or UPS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eContainment Standard\u003c\/strong\u003e: Sealed inside hermetic, specialized anti-static industrial packaging enclosures complete with desiccant blocks to prevent moisture ingress into the electrical connector core.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518869299373,"sku":"330103-17-22-10-12-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada330103-17-22-10-12-05-3300-xl-8-mm-probes-craaf4brzjk.jpg?v=1766980629","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330103-17-22-10-12-05-3300-xl-8-mm-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}