{"product_id":"bently-nevada-330101-00-45-20-12-05-3300-xl-8mm-proximity-vibration-transducer-probe","title":"Bently Nevada 330101-00-45-20-12-05 3300 XL 8mm Proximity Vibration Transducer Probe","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-45-20-12-05 3300 XL 8 mm Proximity Probe drives uninterrupted mechanical tracking within high-criticality asset protection frameworks. This industrial-grade eddy current sensor provides stable, non-contact measurement of shaft radial vibration, dynamic position deviations, and axial thrust displacement parameters on high-speed rotating elements.\u003c\/p\u003e\n\u003cp\u003eReliability managers deploy this specific extended-reach armored probe configuration inside comprehensive Turbine Supervisory Instrumentation (TSI) layouts to manage operational risks across heavy utility assets, including boiler feed pumps, massive induction fans, and high-pressure process compressors. The internal sensor geometry transmits a low-noise analog raw signal directly to the Bently Nevada 3500 monitoring backplane or remote Proximitor units. This ultra-responsive telemetry feeds processing networks the precise displacement data needed to trigger automated safety interlocks and execute emergency shutdowns before mechanical breakdown occurs.\u003c\/p\u003e\n\u003ch2\u003ePart Number Option Block Breakdown\u003c\/h2\u003e\n\u003ch3\u003e330101 [3300 XL 8 mm Probe Core Profile]\u003c\/h3\u003e\n\u003cp\u003eDesignates the standard 8 mm eddy current probe tip structure combined with an imperial 3\/8-24 UNF external thread profile for high-torque mechanical fastening into standard mounting ports.\u003c\/p\u003e\n\u003ch3\u003e-00 [Unthreaded Length Segment]\u003c\/h3\u003e\n\u003cp\u003eSpecifies a 0.0-inch unthreaded barrel configuration, ensuring cut threads extend fully across the casing sleeve to maximize physical depth adjustment capabilities during field deployment.\u003c\/p\u003e\n\u003ch3\u003e-45 [Overall Case Length Segment]\u003c\/h3\u003e\n\u003cp\u003eEstablishes the total threaded case length as 4.5 inches, delivering an extended physical reach designed to span deep machine outer casings, thick cooling jackets, or heavy bearing housing blocks safely.\u003c\/p\u003e\n\u003ch3\u003e-20 [Total Cable Length Segment]\u003c\/h3\u003e\n\u003cp\u003eDefines a 2.0-meter (6.6 feet) integrated coaxial cable length, measured precisely from the molded sensor head tip to the male miniature connection terminal.\u003c\/p\u003e\n\u003ch3\u003e-12 [Fluid-Tight Armor with Connector Protector]\u003c\/h3\u003e\n\u003cp\u003eEquips the integrated coaxial line with a flexible, fluid-tight stainless steel armor sleeve over its entire run and includes a factory-molded male ClickLoc connector protector to seal the joint interface against fluid entry.\u003c\/p\u003e\n\u003ch3\u003e-05 [Global Safety Framework Authorization]\u003c\/h3\u003e\n\u003cp\u003eCarries comprehensive multi-agency international hazardous area certifications, including ATEX, IECEx, and North American safety standards, enabling continuous secure operation within intrinsically safe industrial zones.\u003c\/p\u003e\n\u003ch2\u003eComponent Specifications and Field Parameters\u003c\/h2\u003e\n\u003ch3\u003eTransducer Operating Metrics\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCertified Field Performance Values\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eManufacturer\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCountry of Origin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e90318080\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Hardware Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.46 kg (1.01 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBox Shipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e220 mm x 220 mm x 75 mm (8.7 in x 8.7 in x 3.0 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Sensing Window\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) nominal linear window starting at a 0.25 mm gap\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTransducer Scale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when combined with standard 3300 XL Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature Limits\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51°C to +177°C (-60°F to +350°F) for probe tip and cable assembly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProtective Ingress Class\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIP68 \/ NEMA 4X certified fluid and gas sealing\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSite Positioning \u0026amp; Mechanical Alignment Manual\u003c\/h2\u003e\n\u003cp\u003eField instrumentation specialists must establish the precise mechanical gap clearance using an accurate digital voltmeter during physical deployment. Thread the 4.5-inch probe barrel into the machine port and monitor the DC gap voltage at the corresponding 3300 XL Proximitor sensor test terminals. Rotate the probe until the meter displays approximately -10.0 VDC, representing the mathematical center of the 2.0 mm linear calibration band.\u003c\/p\u003e\n\u003cp\u003eMaintain a strict minimum bend radius of 25.4 mm (1.0 inch) along the armored coaxial line to eliminate risk of core fatigue or changes in high-frequency signal propagation. Route the sensor line inside grounded, isolated metal conduits to block atmospheric electromagnetic noise. Technicians must verify that the paired extension cable combines with this 2.0-meter probe to achieve the exact 5.0-meter or 9.0-meter total system loop length required by the specific Proximitor module.\u003c\/p\u003e\n\u003ch2\u003eMechanical Durability \u0026amp; Infrastructure Integration\u003c\/h2\u003e\n\u003cp\u003eThe heavy-duty engineering of the 3300 XL probe utilizes a premium polyphenylene sulfide (PPS) tip material, injection-molded over the internal sensing coil to construct an airtight, chemical-resistant barrier. This advanced design prevents structural breakdown or moisture absorption when submerged continuously in hot synthetic lubricants, ammonia gas, or high-pressure steam lines.\u003c\/p\u003e\n\u003cp\u003eThe unattenuated analog output waveforms travel through the low-loss armored coaxial line directly to the Bently Nevada 3500\/42M monitor. The system mirrors these synchronized shaft dynamics to a plant-wide Honeywell Experion PKS or Siemens S7 PLC framework via dedicated analog loops or automated Modbus TCP networks. This multi-layered layout gives operations teams simultaneous access to split-second safety interlocks and deep predictive machine health trending.\u003c\/p\u003e\n\u003ch2\u003eCommercial Packing Inventory\u003c\/h2\u003e\n\u003cp\u003eThe factory-sealed individual carton contains the following tracking items:\u003c\/p\u003e\n\u003cp\u003e(1) Original Bently Nevada 330101-00-45-20-12-05 Armored Proximity Probe\u003c\/p\u003e\n\u003cp\u003e(2) Factory-installed male miniature coaxial ClickLoc connector terminal\u003c\/p\u003e\n\u003cp\u003e(3) Rugged, chemical-resistant composite connector protector sleeve\u003c\/p\u003e\n\u003cp\u003e(4) Complete material traceability card and individual physical calibration certificate\u003c\/p\u003e\n\u003ch2\u003ePremium Cargo Security \u0026amp; Distribution Dispatch\u003c\/h2\u003e\n\u003cp\u003eOur international logistics facility inspects, packages, and dispatches all equipment inventory within 2-7 days following payment finalization. We route all critical machinery components via premium express air carriers, including DHL, FedEx, and UPS, to guarantee fast, tracked, and insured delivery to your facility.\u003c\/p\u003e\n\u003cp\u003eOur warehouse packages each sensor assembly inside heavy-duty anti-static industrial packaging sheets before securing it within custom, shock-absorbing foam padding inserts. This strict packaging process provides complete protection against electrostatic discharge, severe transit drops, and ambient moisture entry along international shipping routes.\u003c\/p\u003e\n\u003ch2\u003eField Maintenance Engineering Diagnostics\u003c\/h2\u003e\n\u003ch3\u003eQ1: What specific installation advantage does a 4.5-inch case length offer over a standard 2.0-inch variant?\u003c\/h3\u003e\n\u003cp\u003eA1: The deep 4.5-inch threaded barrel profile (-45 option) allows the probe to pass completely through thick machine components, such as external structural ribs, insulation blankets, or deep outer bearing caps. Because the threads cover the entire barrel length, field crews can adjust the depth easily to place the probe tip exactly at the target surface without requiring a separate internal mounting bracket.\u003c\/p\u003e\n\u003ch3\u003eQ2: Can I connect this 2.0-meter probe lead directly to a standard 7.0-meter 3300 XL extension cable?\u003c\/h3\u003e\n\u003cp\u003eA2: Yes. Pairing this 2.0-meter probe lead with a 7.0-meter extension cable creates a total electrical loop length of exactly 9.0 meters. You must ensure that your remote 3300 XL Proximitor sensor is calibrated explicitly for a 9.0-meter system length to maintain accurate scale factor tracking and prevent signal errors.\u003c\/p\u003e\n\u003ch3\u003eQ3: What specific protection does the -12 option combination provide for the ClickLoc interface?\u003c\/h3\u003e\n\u003cp\u003eA3: The -12 option combines tough stainless steel armor over the cable run with a pre-installed composite connector protector sleeve at the terminal joint. The armor shields the line from physical cuts or pinches, while the protector sleeve locks out ambient moisture, oil spray, and conductive metal dust from penetrating the miniature coaxial coupling.\u003c\/p\u003e\n\u003ch3\u003eQ4: What action should I take if the monitoring loop reads a constant 0 VDC terminal voltage?\u003c\/h3\u003e\n\u003cp\u003eA4: A 0 VDC output from the proximity loop indicates a short circuit to ground. Inspect the armored coaxial cable along its run for physical pinholes or internal pinches where the inner conductor might touch the outer shield. Check inside the ClickLoc connector protector for fluid or metal dust ingress, and dry or clean the terminal faces to restore the proper isolation barrier.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518883782829,"sku":"330101-00-45-20-12-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330101-00-45-20-12-05-proximity-probes-c3ld4vu3awq.jpg?v=1766980982","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330101-00-45-20-12-05-3300-xl-8mm-proximity-vibration-transducer-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}