{"product_id":"bently-nevada-330101-00-43-15-12-05-3300-xl-8mm-proximity-displacement-transducer","title":"Bently Nevada 330101-00-43-15-12-05 3300 XL 8mm Proximity Displacement Transducer","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-43-15-12-05 3300 XL 8 mm Proximity Probe establishes continuous, high-fidelity mechanical tracking within automated machine health frameworks. This heavy-duty non-contact sensor measures real-time shaft radial vibration profiles, dynamic position variations, and axial thrust displacement parameters on critical high-velocity rotating machinery.\u003c\/p\u003e\n\u003cp\u003eReliability specialists deploy this specific threaded barrel configuration inside complex Turbine Supervisory Instrumentation (TSI) layouts to manage operational risks across heavy utility infrastructure, including power-generation steam turbines, high-pressure centrifugal process compressors, and major cooling fans. The internal sensing coil maps raw mechanical clearances and transfers an ultra-stable analog waveform to remote monitors without experiencing signal drop or phase shifting. This ultra-responsive data path feeds your central DCS safety interlocks and automated emergency shutdown circuits with the raw telemetry needed to trip operations instantly before catastrophic bearing oil film collapse or rotor-to-stator contact occurs.\u003c\/p\u003e\n\u003ch2\u003ePart Number Option Block Breakdown\u003c\/h2\u003e\n\u003ch3\u003e330101 [3300 XL 8 mm Probe Core Profile]\u003c\/h3\u003e\n\u003cp\u003eDesignates the product family as a standard 8 mm tip diameter eddy current proximity probe assembly engineered with standard imperial 3\/8-24 UNF external case threads for direct mechanical port installation.\u003c\/p\u003e\n\u003ch3\u003e-00 [Unthreaded Length Segment]\u003c\/h3\u003e\n\u003cp\u003eSpecifies a 0.0-inch unthreaded barrel layout, indicating that full structural threads run the entire length of the stainless steel sleeve to deliver maximum depth versatility during field adjustment.\u003c\/p\u003e\n\u003ch3\u003e-43 [Threaded Case Length Segment]\u003c\/h3\u003e\n\u003cp\u003eEstablishes the total threaded case length at 4.3 inches, providing an extended physical reach designed to span deep machine casings, outer bearing housings, or internal oil deflector plates safely.\u003c\/p\u003e\n\u003ch3\u003e-15 [Total Cable Length Segment]\u003c\/h3\u003e\n\u003cp\u003eDefines a 1.5-meter (4.9 feet) integrated coaxial cable length, measured precisely from the molded probe head tip to the male miniature connection terminal.\u003c\/p\u003e\n\u003ch3\u003e-12 [Fluid-Tight Armor with Connector Protector]\u003c\/h3\u003e\n\u003cp\u003eEquips the integrated coaxial line with a flexible, fluid-tight stainless steel armor sleeve over its entire run and includes a factory-molded male ClickLoc connector protector to seal the joint interface against fluid entry.\u003c\/p\u003e\n\u003ch3\u003e-05 [Global Safety Framework Authorization]\u003c\/h3\u003e\n\u003cp\u003eCarries comprehensive international hazardous area certifications, including ATEX, IECEx, and North American intrinsically safe safety frameworks for continuous deployment within volatile environments.\u003c\/p\u003e\n\u003ch2\u003eMechanical \u0026amp; Metrological Attributes\u003c\/h2\u003e\n\u003ch3\u003eMechanical Attributes Table\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCertified Calibration Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eManufacturer\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCountry of Origin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e90318080\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Component Net Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.42 kg (0.93 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Carton Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e210 mm x 210 mm x 70 mm (8.3 in x 8.3 in x 2.8 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Sensing Envelope\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) nominal tracking window starting at a 0.25 mm gap\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eIncremental Scale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when combined with standard 3300 XL Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperational Temperature Limits\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51°C to +177°C (-60°F to +350°F) for probe head and cable assembly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProtective Ingress Isolation\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIP68 \/ NEMA 4X rated hermetic fluid and gas barrier protection\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eProximity Loop Field Positioning Mandates\u003c\/h2\u003e\n\u003cp\u003eField instrumentation crews must establish the precise mechanical gap clearance using an accurate digital voltmeter during physical deployment. Thread the 4.3-inch probe barrel smoothly into the machine casing port while monitoring the raw DC gap voltage at the corresponding 3300 XL Proximitor sensor test terminals. Rotate the probe assembly until the voltmeter displays approximately -10.0 VDC, which corresponds to the exact mathematical center of the calibrated 2.0 mm linear operational field.\u003c\/p\u003e\n\u003cp\u003eMaintain a strict minimum bend radius of 25.4 mm (1.0 inch) across the stainless steel armored run to avoid compressing the internal dielectric layers or altering high-frequency system capacitance. Route the armored line through dedicated, grounded instrument raceways to isolate the low-voltage analog signal from nearby high-voltage lines. Technicians must verify that the selected extension cable pairs correctly with this 1.5-meter probe to match the exact 5.0-meter or 9.0-meter total electrical loop length required by the remote Proximitor module.\u003c\/p\u003e\n\u003ch2\u003eStructural Survivability \u0026amp; Automation Infrastructure Bridging\u003c\/h2\u003e\n\u003cp\u003eThe high-grade design of the 330101-00-43-15-12-05 probe uses a tough polyphenylene sulfide (PPS) composite tip, molded directly over the internal wire coil to create an airtight seal. This structural barrier prevents degradation when the sensor body remains constantly submerged in hot synthetic lubricants, aggressive chemical fumes, or high-pressure steam within internal bearing housings.\u003c\/p\u003e\n\u003cp\u003eThe low-loss armored coaxial line routes the unattenuated analog displacement telemetry directly to the input channels of a centralized Bently Nevada 3500\/42M machinery protection rack. The rack system transmits these real-time dynamic profiles to a plant-wide Honeywell Experion PKS or Siemens S7 PLC framework via dedicated analog loops or automated Modbus TCP channels. This multi-layered layout provides the control room with simultaneous access to split-second safety interlocks and deep predictive machine health trending.\u003c\/p\u003e\n\u003ch2\u003eCommercial Packing Inventory\u003c\/h2\u003e\n\u003cp\u003eThe factory-sealed individual carton contains the following equipment:\u003c\/p\u003e\n\u003cp\u003e(1) Original Bently Nevada 330101-00-43-15-12-05 Armored Proximity Probe\u003c\/p\u003e\n\u003cp\u003e(2) Factory-installed male miniature coaxial ClickLoc connector terminal\u003c\/p\u003e\n\u003cp\u003e(3) Rugged, chemical-resistant composite connector protector sleeve\u003c\/p\u003e\n\u003cp\u003e(4) Complete material traceability card and individual physical calibration sheet\u003c\/p\u003e\n\u003ch2\u003ePremium Cargo Protection \u0026amp; Dispatch Logistics\u003c\/h2\u003e\n\u003cp\u003eOur international logistics hub processes and dispatches all verified industrial orders within 2-7 days after confirming payment details. We route all critical asset components through express global carriers, including DHL, FedEx, and UPS, to ensure rapid, fully trackable, and insured delivery to your plant site.\u003c\/p\u003e\n\u003cp\u003eOur warehouse wraps each armored probe assembly within heavy-duty anti-static industrial packaging sheets before securing it into customized shock-absorbing foam inserts. This strict packaging process provides complete protection against electrostatic discharge, severe transit drops, and ambient moisture entry along international shipping routes.\u003c\/p\u003e\n\u003ch2\u003eSite Machinery Instrumentation Diagnostics\u003c\/h2\u003e\n\u003ch3\u003eQ1: What specific installation advantage does a 4.3-inch case length offer over a standard 2.0-inch variant?\u003c\/h3\u003e\n\u003cp\u003eA1: The deep 4.3-inch threaded barrel profile (-43 option) allows the probe to pass completely through thick machine components, such as external structural ribs, insulation blankets, or deep outer bearing caps. Because the threads cover the entire barrel length, field crews can adjust the depth easily to place the probe tip exactly at the target surface without requiring specialized bracket additions.\u003c\/p\u003e\n\u003ch3\u003eQ2: Can I connect this 1.5-meter probe lead directly to a standard 8.0-meter 3300 XL extension cable?\u003c\/h3\u003e\n\u003cp\u003eA2: No. Connecting a 1.5-meter probe lead to an 8.0-meter extension cable creates a total electrical loop length of 9.5 meters. Standard Bently Nevada 3300 XL Proximitor sensors are calibrated strictly for either 5.0-meter or 9.0-meter total system lengths. This 9.5-meter mismatch alters electrical impedance, ruining measurement calibration. To use this 1.5-meter probe in a 9.0-meter loop, you must pair it with a 7.5-meter extension cable.\u003c\/p\u003e\n\u003ch3\u003eQ3: What specific protection does the -12 option combination provide for the ClickLoc interface?\u003c\/h3\u003e\n\u003cp\u003eA3: The -12 option combines tough stainless steel armor over the cable run with a pre-installed composite connector protector sleeve at the terminal joint. The armor shields the line from physical cuts or pinches, while the protector sleeve locks out ambient moisture, oil spray, and conductive metal dust from penetrating the miniature coaxial coupling.\u003c\/p\u003e\n\u003ch3\u003eQ4: What action should I take if the monitoring loop reads a constant 0 VDC terminal voltage?\u003c\/h3\u003e\n\u003cp\u003eA4: A 0 VDC output from the proximity loop indicates a short circuit to ground. Inspect the armored coaxial cable along its run for physical pinholes or internal pinches where the inner conductor might touch the outer shield. Check inside the ClickLoc connector protector for fluid ingress, and dry or clean the terminal faces to restore the proper isolation barrier.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518883881133,"sku":"330101-00-43-15-12-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330101-00-43-15-12-05-8-mm-proximity-probes-maltplowvji.jpg?v=1766980987","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330101-00-43-15-12-05-3300-xl-8mm-proximity-displacement-transducer","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}