{"product_id":"bently-nevada-330101-00-28-10-02-05-3300-xl-8mm-proximity-sensor-probe","title":"Bently Nevada 330101-00-28-10-02-05 3300 XL 8mm Proximity Sensor Probe","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330101-00-28-10-02-05 eddy current proximity probe acts as a critical line of defense for heavy rotating machinery, delivering high-precision fluid-film bearing displacement and vibration telemetry. This 3300 XL 8mm sensor transforms physical shaft movement into dynamic electrical signals, feeding accurate real-time data directly into the Bently Nevada 3500 Monitoring System and plant-wide Distributed Control Systems (DCS). Engineering teams rely on its stable linear output to manage critical machinery assets, optimize predictive maintenance cycles, and prevent catastrophic failures in high-velocity turbines, compressors, and pumps. It operates seamlessly under severe thermal and fluid conditions, ensuring uncompromised safety and automated emergency shutdown execution when mechanical limits are breached.\u003c\/p\u003e\n\u003ch2\u003eSuffix Scribing and Part Number Breakdown\u003c\/h2\u003e\n\u003cp\u003eThe specific alpha-numeric configuration of this 3300 XL probe defines its exact physical layout and hazardous area compliance ratings.\u003c\/p\u003e\n\u003ch3\u003e00 - Unthreaded Length Option\u003c\/h3\u003e\n\u003cp\u003eA zero unthreaded length indicates the 3\/8-24 UNF thread runs the entire length of the probe barrel. This profile provides maximum mounting flexibility and robust mechanical engagement within the machine housing or bracket.\u003c\/p\u003e\n\u003ch3\u003e28 - Overall Case Length Option\u003c\/h3\u003e\n\u003cp\u003eThis suffix designates a 2.8-inch total case length. Note that the original raw text contained a discrepancy, listing 9.6 inches under a different variant string; this 2.8-inch specification establishes the precise physical insertion depth and spatial footprint inside the bearing housing.\u003c\/p\u003e\n\u003ch3\u003e10 - Total Length Option\u003c\/h3\u003e\n\u003cp\u003eThe probe features a 1.0-meter (3.3 feet) integrated cable length. This short-lead design minimizes electrical noise susceptibility before connecting to an extension cable, ensuring clean signal transmission to the proximity transducer module.\u003c\/p\u003e\n\u003ch3\u003e02 - Connector and Cable Option\u003c\/h3\u003e\n\u003cp\u003eThe cable terminates in a miniature coaxial ClickLoc connector. This specific link uses standard, non-armored cabling that allows flexible routing through tight conduit runs while maintaining a reliable, click-locking connection that resists industrial vibration.\u003c\/p\u003e\n\u003ch3\u003e05 - Agency Approval Option\u003c\/h3\u003e\n\u003cp\u003eThis suffix guarantees full hardware certification for explosive environments. The probe meets strict global standards, carrying valid CSA, ATEX, and IECEx hazardous area approvals for zone-classified environments.\u003c\/p\u003e\n\u003ch2\u003ePhysical and Electrical Parameters\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification Category\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eManufacturer\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCountry of Origin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States of America\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Tariff Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8531900000\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eNet Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.1 kg (0.22 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 x 1.5 x 123.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e303 stainless steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Tip Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePolyphenylene sulfide (PPS)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) starting at roughly 0.25 mm (10 mils) gap\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 °C to +177 °C (-60 °F to +351 °F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProtection Rating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIP68 \/ NEMA 4X equivalent at probe tip\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eField Engineering and Installation Protocol\u003c\/h2\u003e\n\u003cp\u003ePrecise physical alignment dictates sensor performance and accuracy. Engineers must set the initial mechanical gap using a digital voltmeter hooked up to the proximity transducer. Adjust the physical distance until the gap voltage reads exactly -10.0 VDC, which positions the target shaft precisely in the middle of the 3300 XL's linear range.\u003c\/p\u003e\n\u003cp\u003eAvoid bending the coaxial line tightly; maintain a minimum cable bend radius of 25.4 mm (1.0 inch) to prevent structural damage to the internal shielding. When routing through the machine casing, use oil-tight grommets and dedicated conduits to stop moisture ingress and process fluid leaks from reaching the ClickLoc connector. Ensure the probe case connects cleanly to the machine ground while keeping the coaxial shield isolated from intermediate structures until it grounds at the monitor rack.\u003c\/p\u003e\n\u003ch2\u003eCritical Asset Survivability and TSI Synergy\u003c\/h2\u003e\n\u003cp\u003eThis proximity probe excels inside brutal, high-temperature industrial environments where standard sensors fail. The polyphenylene sulfide tip resists chemical degradation from synthetic lube oils, steam, and corrosive process gases.\u003c\/p\u003e\n\u003cp\u003eThe sensor integrates seamlessly into comprehensive Turbine Supervisory Instrumentation (TSI) strategies. By delivering raw, unbuffered eddy current data, the probe enables the Bently Nevada 3500 rack to calculate precise shaft relative vibration, structural eccentricity, and thrust position. This raw data streams effortlessly into plant architectures like Honeywell Experion PKS via Modbus or OPC UA pathways, empowering automated diagnostics and protecting high-capital assets from destructive rubbing or rotor instability.\u003c\/p\u003e\n\u003ch2\u003eOrdering and Packaging Manifest\u003c\/h2\u003e\n\u003cp\u003eEvery order fulfillment includes the following baseline components:\u003c\/p\u003e\n\u003cp\u003e(1) One authentic Bently Nevada 330101-00-28-10-02-05 8mm proximity probe.\u003c\/p\u003e\n\u003cp\u003e(2) Factory-installed ClickLoc miniature coaxial connector with a protective silicone cap.\u003c\/p\u003e\n\u003cp\u003e(3) Removable thread protection sleeve shielding the 3\/8-24 UNF threads during transit.\u003c\/p\u003e\n\u003cp\u003e(4) Compliance certificate confirming CSA, ATEX, and IECEx hazardous area safety ratings.\u003c\/p\u003e\n\u003ch2\u003eGlobal Logistics and Dispatch Profile\u003c\/h2\u003e\n\u003cp\u003eOur logistics desk processes and dispatches units within 2-7 days when payment finish protocols complete successfully. We route all critical sensor shipments via premium express carriers including DHL, FEDEX, and UPS to guarantee fast global transit times. Each probe undergoes a final quality check before placement inside specialized anti-static industrial packaging. This multi-layered, ESD-shielded containment guards the delicate internal coil structures and high-frequency coaxial elements against physical impacts and static discharge throughout the shipping journey.\u003c\/p\u003e\n\u003ch2\u003eOperational Troubleshooting FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: What is the significance of the ClickLoc connector on this specific 3300 XL probe model?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: The ClickLoc connector provides a positive lock mechanism that prevents the coaxial connection from backing out under severe industrial vibration. It eliminates the need for special torque wrenches, audiably clicking when fully sealed, while maintaining a low electrical resistance pathway necessary for accurate high-frequency eddy current measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: How do you verify if the probe coil has suffered structural damage or internal short-circuiting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: Disconnect the probe from the extension cable and measure the center conductor to the outer shield resistance using a digital multimeter. A healthy 3300 XL 8mm probe with a 1.0-meter cable should yield a resistance value between 5.9 and 7.7 ohms; reading an open circuit or zero ohms indicates an immediate replacement is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Can this probe connect directly to a DCS analog input card without a separate transducer module?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: No, this probe cannot hook directly to a general-purpose analog input module. The probe requires a matching 3300 XL Proximitor Sensor to supply the high-frequency RF excitation signal and translate the resulting impedance variations into a linear 200 mV\/mil voltage output acceptable by a DCS or TSI monitor.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518883094701,"sku":"330101-00-96-10-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330101-00-96-10-02-05-3300-xl-8-mm-proximity-probes-mwvndh0guno.jpg?v=1766980959","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330101-00-28-10-02-05-3300-xl-8mm-proximity-sensor-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}