{"product_id":"bently-nevada-330101-00-12-15-02-00-proximity-sensor-3300-xl-series","title":"Bently Nevada 330101-00-12-15-02-00 Proximity Sensor 3300 XL Series","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330101-00-12-15-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eoperates as a dedicated hardware component for non-contacting static and dynamic displacement measurements within 3300 XL Series vibration monitoring systems. This hardware component translates physical gap clearances between the probe tip and a moving target surface into an electrical signal. It interfaces with an external proximitor module to execute real-time monitoring of machine shaft positioning variations across standard proximity transducer networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Part Number Identification\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330101:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL 8 mm Proximity Probe (Standard 3\/8-24 UNF Thread configuration)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnthreaded case length option (0.0 in)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-12:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOverall case length option (1.2 in)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-15:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTotal length option (1.5 m \/ 4.9 ft)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMiniature ClickLoc coaxial connector configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo agency approvals requested\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Hardware Matrix\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-00-12-15-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Tip Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Thread Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF-2A\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eIntegrated Cable Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCoaxial cable with miniature ClickLoc connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor Compatibility\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when combined with standard 3300 XL Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C (Sensor head and cable assembly)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive transducer head driven via external Proximitor oscillator loop\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.22 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20.0 x 15.0 x 5.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThis hardware relies on eddy-current probe scaling to translate high-speed rotor dynamics into electrical values without physical mechanical contact. The probe tip transmits an active radio frequency field into surrounding metal surfaces, directly modulating an external oscillator circuit based on gap distances. To maintain tracking performance during intense casing thermal expansion or structural movement variations, the internal windings are locked inside a high-temperature thermoplastic envelope. This physical architecture preserves linear signal verification margins across the entire operating range, delivering accurate measurements to TSI backplane processors tracking shaft orbit, position parameters, or phase marks.\u003c\/p\u003e\n\u003ch3\u003eTechnical Support Diagnostics\u003c\/h3\u003e\n\u003cp\u003eQ: What are the exact criteria for gap voltage validation using this hardware?\u003c\/p\u003e\n\u003cp\u003eA: Gap voltage validation must be executed via the raw signal terminal of the matching proximitor module. For standard AISI 4140 target materials, the sensor system operates over a linear range where the midpoint target correlates to a -10 VDC output loop feedback value.\u003c\/p\u003e\n\u003cp\u003eQ: Can this sensor cable configuration be altered or short-cutted in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The total electrical length of the probe cable affects overall circuit tuning and system impedance parameters. Truncating or splicing the coaxial line disrupts calibrated eddy-current probe scaling metrics and invalidates factory measurement accuracy ratings.\u003c\/p\u003e\n\u003cp\u003eQ: What precautions prevent signal cross-talk suppression failures when multiple units are deployed?\u003c\/p\u003e\n\u003cp\u003eA: Maintain the minimum mechanical separation distances specified in official installation drawings. Cross-talk suppression failures occur if the electromagnetic fields of adjacent probes intersect, which distorts target measurements and introduces artificial noise into the vibration monitoring circuit.\u003c\/p\u003e\n\u003ch3\u003eField Assembly Procedures\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Engagement and Fitment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInsert the probe body into the mounting bracket or outer case port. Thread the 3\/8-24 UNF casing cleanly into position, ensuring smooth rotation to avoid strip damage. Secure a minimum thread engagement depth before locking the locknut.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Gap Adjustment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMonitor system loop voltage using a digital voltmeter linked to the proximitor monitor outputs. Rotate the probe body until the target voltage registers within the -10 VDC baseline zone, indicating the physical midpoint of the calibrated linear measurement window.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Connection Integrity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSnap the ClickLoc coaxial fitting securely into the matching extension line. Ensure the mated junction is firmly locked to prevent high-frequency electrical noise from disrupting the signal line.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrder Logistics Package Elements\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Bently Nevada 330101 8 mm Proximity Probe (with integrated 1.5 m cable)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Standard Locknut Washer Pack\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Certificate of Factory Calibration Data Sheet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFreight Consignment Parameters\u003c\/h3\u003e\n\u003cp\u003eDelivery time: 2-7 days when payment finish verification is achieved by the warehouse team. Shipment processing proceeds through global express networks including DHL, FEDEX, or UPS. Components are locked within customized anti-static industrial packaging sheets containing high-density contour protection blocks to preserve all threaded connections, internal seals, and fiber configurations from structural damage during transit.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518830665901,"sku":"330101-00-12-15-02-00","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330101-00-12-15-02-00-3300-xl-8-mm-proximity-probes-rfqihhygt2p.jpg?v=1766979816","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330101-00-12-15-02-00-proximity-sensor-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}