{"product_id":"bently-nevada-32000-29-05-10-072-07-02-proximity-probe-housing-assembly-31000-32000-series","title":"Bently Nevada 32000-29-05-10-072-07-02 Proximity Probe Housing Assembly 31000\/32000 Series","description":"\u003cp\u003eConfigured for radial eddy-current probe mechanical mounting in the 31000\/32000 housing architecture, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 32000-29-05-10-072-07-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e32000 series proximity probe housing\u003c\/strong\u003e) provides a sealed mechanical interface for probe sleeve positioning, extension cable routing, and external gap adjustment access within proximity transducer installation points.\u003c\/p\u003e\n\u003ch3\u003eSuffix and Configuration Breakdown\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eSegment\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eDefinition\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e32000\u003c\/td\u003e\n\u003ctd\u003eMetric proximity probe housing series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e29\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm probe with connector protector \/ multiple approvals variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eProbe cable length 0.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eStandoff adapter length configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e072\u003c\/td\u003e\n\u003ctd\u003eProbe penetration length configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e07\u003c\/td\u003e\n\u003ctd\u003eConduit \/ fitting configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMounting thread configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e32000-29-05-10-072-07-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eNot specified (typical 31000\/32000 housing class approx 1.2 kg range)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified (modular sleeve + housing assembly structure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C (probe system dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive mechanical assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eGlass reinforced PPS thermoplastic with conductive fibers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal Components\u003c\/td\u003e\n\u003ctd\u003eAISI 303 \/ 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing Element\u003c\/td\u003e\n\u003ctd\u003eNeoprene \/ Viton O-ring system (probe interface dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP66 \/ Type 4X equivalent enclosure performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy Current Probe Scaling and Rotor Dynamics Interface\u003c\/h3\u003e\n\u003cp\u003eThe housing assembly maintains fixed spatial geometry between probe tip and rotating shaft target surface, supporting eddy-current displacement conversion used in vibration and Keyphasor measurement systems. Gap voltage scaling behavior is maintained through controlled probe standoff geometry, ensuring linear response alignment within calibrated system curves typically referenced around -10 VDC mid-gap bias region in 3300 XL signal conditioning chains.\u003c\/p\u003e\n\u003cp\u003eRotor dynamics measurement stability is dependent on mechanical rigidity of the sleeve assembly, where cross-talk suppression is achieved through grounded stainless steel structural continuity and separation of adjacent probe channels. Mechanical resonance control is enforced by limiting unsupported sleeve length to avoid amplification of vibration modes in extended probe penetration configurations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the housing provide electrical signal conditioning?\u003cbr\u003eA: No. The assembly is a passive mechanical structure. Signal conditioning is external to the Proximitor system.\u003c\/p\u003e\n\u003cp\u003eQ: Can the housing be used for axial position measurement?\u003cbr\u003eA: No. Axial displacement applications require dedicated dual-probe axial housing configurations.\u003c\/p\u003e\n\u003cp\u003eQ: Is the assembly explosion-proof rated?\u003cbr\u003eA: No. It is not explosion-proof. It may be used in intrinsically safe systems when combined with certified barriers.\u003c\/p\u003e\n\u003cp\u003eQ: What limits apply to probe penetration length?\u003cbr\u003eA: Probe penetration is constrained by mechanical resonance behavior and sleeve support requirements. Extended lengths require additional structural support.\u003c\/p\u003e\n\u003cp\u003eQ: Does the system support hot-swapping of probes?\u003cbr\u003eA: Yes, probe replacement can be performed externally after housing cover removal, provided system is de-energized and gap calibration is maintained.\u003c\/p\u003e\n\u003chr\u003e\u003chr\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eThe outer sleeve must be installed flush and mechanically fixed into the machine case prior to probe insertion. Probe sleeve insertion must ensure correct axial positioning relative to target surface without preloading the probe tip.\u003c\/p\u003e\n\u003cp\u003eConduit entries must maintain shield continuity and proper grounding termination to prevent EMI coupling into measurement circuits. All unused ports must be sealed using approved plugs to maintain ingress protection rating.\u003c\/p\u003e\n\u003cp\u003eRetaining nut torque must be applied within controlled mechanical limits to avoid deformation of PPS housing threads. Cable routing shall maintain minimum bend radius requirements at connector interfaces to avoid signal attenuation or intermittent discontinuity.\u003c\/p\u003e\n\u003cp\u003eSleeve lengths exceeding standard unsupported ranges require mechanical stabilization to avoid resonance-induced measurement deviation.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e32000-29-05-10-072-07-02 housing assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProbe sleeve and standoff adapter components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStainless steel conduit fittings and sealing plugs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRetaining hardware and mounting accessories\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation reference documentation (31000\/32000 datasheet set)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLogistics and Delivery Information\u003c\/h3\u003e\n\u003cp\u003eDelivery time: 3-5 days when payment finish, via DHL \/ FEDEX \/ UPS.\u003cbr\u003eAll units shipped in anti-static industrial packaging with vibration-isolated protection and sealed mechanical alignment support for probe sleeve integrity.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518822539437,"sku":"32000-29-05-10-072-07-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-32000-29-05-10-072-07-02-proximity-probe-housingassemblies-0svefsorsjc.jpg?v=1766979593","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-32000-29-05-10-072-07-02-proximity-probe-housing-assembly-31000-32000-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}