{"product_id":"bently-nevada-32000-16-05-08-070-03-02-proximity-probe-housing-3300-xl","title":"Bently Nevada 32000-16-05-08-070-03-02 Proximity Probe Housing 3300 XL","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 32000-16-05-08-070-03-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as the primary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e32000\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probe Housing Assembly utilized to execute mechanical encapsulation and external positioning across 3300 XL Series platforms. This hardware configuration functions as a sealed environmental shield for an internal proximity sensor tracking dynamic shaft radial vibration or Keyphasor phase reference measurements. It enables physical access to the probe barrel and extension cable connection point from outside the machine case, allowing calibration or probe replacement tasks to proceed without exposing or disabling the internal machine case boundary elements.\u003c\/p\u003e\n\u003ch3\u003eTechnical Suffix Selection Analysis\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e32000:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMetric Proximity Probe Housing Assembly Base\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-16:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL 8 mm proximity probe installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-05:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.5 m (20 in) integrated sensor cable length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-08:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e80 mm standoff adapter length configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-070:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e70 mm internal probe sleeve penetration depth\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-03:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTwo plugs, one M20 conduit fitting, and one armored cable seal grip with matching internal grommets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3\/4-14 NPT outer sleeve process mounting thread configuration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePhysical Hardware Parameters\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e32000-16-05-08-070-03-02\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMain Body Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGlass-reinforced Polyphenylene Sulfide (PPS) containing conductive fibers\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eRetaining Chain \u0026amp; Internal Sleeve\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 304 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOuter Sleeve \u0026amp; External Fasteners\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 303 Stainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eO-Ring Compounds\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNeoprene (sleeve-to-housing sealing interface); Viton (internal probe casing)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMechanical Protection Class\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eType 4X (CSA certified) \/ IP66 rated\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eElectrostatic Dissipation Rating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCompliant with CENELEC EN50014 standard for hazardous areas\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive mechanical housing assembly (0 VDC \/ 0 mA load)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.2 kg typical\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e30.0 x 16.0 x 16.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eRotor Dynamics and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThis metric housing assembly provides rigid physical reinforcement to preserve sensor positioning accuracy under extreme rotor dynamics and casing acceleration profiles. The conductive-fiber infused glass-reinforced PPS main body controls mechanical high-frequency sleeve vibration that could induce measurement error into the transducer loop. Maintaining co-axial alignment over the metric M10 X 1 probe thread helps prevent drift in the eddy-current probe scaling metrics over time. This architectural rigidity secures a stable field trajectory for the RF signal, verifying precise gap voltage validation within the standard -10 VDC target zone for radial tracking loops.\u003c\/p\u003e\n\u003ch3\u003eComponent Maintenance Diagnostics\u003c\/h3\u003e\n\u003cp\u003eQ: How can field technicians execute gap voltage validation without breaching the machine casing?\u003c\/p\u003e\n\u003cp\u003eA: Unfasten the captive screws on the housing cover to expose the internal extension cable connection. A high-impedance digital multimeter can be connected directly across the raw signal pins to check the -10 VDC target midpoint without introducing a vacuum or pressure leak to the engine case.\u003c\/p\u003e\n\u003cp\u003eQ: Is this modular plastic housing rated to contain internal explosion pressures?\u003c\/p\u003e\n\u003cp\u003eA: No. The housing assembly is engineered to provide environmental protection matching NEMA 4X and IP66 water ingress specifications only. It is not an explosion-proof assembly. For explosive gas atmospheres requiring an explosion-proof design, use alternative housings CA21000 or CA24701.\u003c\/p\u003e\n\u003cp\u003eQ: What structural limits apply when the metric option dimensions are extended?\u003c\/p\u003e\n\u003cp\u003eA: When combined standoff adapter length and probe penetration depth total dimensions surpass 305 mm (12 in), structural resonance risks arise inside the sleeve assembly. This condition requires an independent external probe support or oil seal assembly (part number 37948-01) to eliminate vibration feedback to the sensor tip.\u003c\/p\u003e\n\u003ch3\u003eField Assembly Procedures\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eProcess Thread Interfacing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThread the AISI 303 stainless steel outer sleeve into the machine case port. Verify that the machine casing is fully secured to the bearing liner to block relative movement discrepancies. Ensure a minimum of 5 full thread engagements into the NPT entry.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRetaining Nut Tightening:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSlide the internal probe sleeve through the outer mounting assembly and position the probe face at the correct mechanical gap distance. Position the retainer plate beneath the primary retaining nut and torque the nut to exactly 29.4 N-m (260 in-lb).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConduit and Port Sealing:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAttach the M20 conduit fitting to the cable routing lines. Insert the supplied metal blanking plugs into all unused entry ports on the plastic base shell, and torque the plug clamping nuts to 0.5 N-m (5 in-lb) to block entry of particulate matter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping Kit Matrix\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Bently Nevada 32000 Conductive PPS Main Terminal Housing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Pre-Installed 3300 XL 8 mm Reverse Mount Proximity Probe (0.5 m Lead)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Metric Standoff Adapter \u0026amp; Probe Sleeve Sub-Assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2 x Threaded Sealing Plugs with Washers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x M20 Conduit Fitting and Armored Cable Seal Gland Assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSupply Logistics Profile\u003c\/h3\u003e\n\u003cp\u003eDelivery time: 2-7 days when payment finish verification is achieved by the warehouse team. Shipment processing proceeds through global express networks including DHL, FEDEX, or UPS. Components are locked within customized anti-static industrial packaging sheets containing high-density contour protection blocks to preserve all threaded connections, internal seals, and fiber configurations from structural damage during transit.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518821228717,"sku":"32000-16-05-08-070-03-02","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-32000-16-05-08-070-03-02-proximity-probe-housingassemblies-o4sdspnzmdb.jpg?v=1766979538","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-32000-16-05-08-070-03-02-proximity-probe-housing-3300-xl","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}