{"product_id":"bently-nevada-21504-00-12-10-02-8-mm-standard-mount-probe","title":"Bently Nevada 21504-00-12-10-02 8 mm Standard Mount Probe","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 21504-00-12-10-02 represents the gold standard in eddy current proximity sensing for critical rotating machinery. Designed for seamless integration with the 3300 and 3500 series machinery protection systems, this 8 mm probe delivers unmatched precision in measuring radial vibration, axial thrust, and phase reference (Keyphasor) data. It functions as the frontline defense for turbines, compressors, and motors, translating mechanical movement into accurate electrical signals.\u003c\/p\u003e\n\u003cp\u003eEngineering teams rely on this specific standard-mount configuration for its exceptional thermal stability and resistance to harsh industrial fluids. Whether deployed in power generation or hydrocarbon processing, the 21504 series ensures maximum uptime by providing the high-fidelity data required for predictive maintenance and automated emergency shutdown protocols. Its robust construction minimizes signal drift, ensuring that your Turbine Supervisory Instrumentation (TSI) operates with absolute integrity.\u003c\/p\u003e\n\u003ch2\u003eHardware Configuration and Suffix Breakdown\u003c\/h2\u003e\n\u003cp\u003eThe alphanumeric suffix code determines the physical and environmental compatibility of the 21504 series probe.\u003c\/p\u003e\n\u003ch3\u003eUnthreaded Length (00)\u003c\/h3\u003e\n\u003cp\u003eThe \"00\" designation indicates a 0.0-inch unthreaded length, meaning the probe body is fully threaded for maximum mounting flexibility within the bracket or housing.\u003c\/p\u003e\n\u003ch3\u003eOverall Case Length (12)\u003c\/h3\u003e\n\u003cp\u003eThe \"12\" suffix specifies a 1.2-inch total case length. This compact form factor is ideal for standard mounting blocks where space is optimized but structural rigidity is required.\u003c\/p\u003e\n\u003ch3\u003eTotal Length (10)\u003c\/h3\u003e\n\u003cp\u003eThis represents a 1.0-meter total cable length. Engineers must match this length with the appropriate extension cable to ensure the system's total electrical length (typically 5 or 9 meters) remains calibrated.\u003c\/p\u003e\n\u003ch3\u003eConnector and Agency Approval (02)\u003c\/h3\u003e\n\u003cp\u003eThe \"02\" suffix denotes the inclusion of a miniature coaxial connector with standard agency approvals, ensuring compliance with global safety standards for non-hazardous and zone-rated industrial environments.\u003c\/p\u003e\n\u003ch2\u003ePerformance and Physical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTechnical Detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eManufacturer\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCountry of Origin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 °C to +177 °C (-60 °F to +350 °F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e903180\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.35 kg (Approx. 0.77 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.2\" Case Length \/ 1.0m Cable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePressure Rating\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUp to 700 kPa (100 psi)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eField Installation Requirements\u003c\/h2\u003e\n\u003cp\u003eProper gapping is critical for linear signal response. Engineers should utilize a digital multimeter to set the \"Gap Voltage,\" typically aiming for -10.0 VDC (the midpoint of the linear range) when using a standard 3300 Proximitor. Ensure the probe tip is perpendicular to the target shaft and verify that the target material matches the AISI 4140 steel calibration standard.\u003c\/p\u003e\n\u003cp\u003eObserve strict cable management protocols. The coaxial cable must not be kinked; maintain a minimum bend radius of 25.4 mm (1 inch). Always use a side-exit or internal housing if the installation environment involves high-velocity oil spray or mechanical debris to protect the probe tip and cable interface.\u003c\/p\u003e\n\u003ch2\u003eCritical Asset Protection Advantages\u003c\/h2\u003e\n\u003cp\u003eThe 21504 series excels in high-vibration environments where inferior sensors fail due to mechanical fatigue. Its chemical-resistant PPS (Polyphenylene Sulfide) tip ensures longevity when exposed to synthetic lubricants and corrosive atmospheres common in petrochemical refineries.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the seamless integration with Bently Nevada 3500\/05 racks and System 1 software allows for advanced diagnostic capabilities. By providing a clean, low-noise signal, this probe enables the detection of early-stage bearing wear and shaft misalignment, preventing catastrophic equipment failure and reducing unplanned downtime in Experion PKS or other integrated DCS environments.\u003c\/p\u003e\n\u003ch2\u003eOrdering info\u003c\/h2\u003e\n\u003cp\u003e(1) Bently Nevada 21504-00-12-10-02 Proximity Probe.\u003c\/p\u003e\n\u003cp\u003e(2) Factory Calibration Certificate (Available upon request).\u003c\/p\u003e\n\u003cp\u003e(3) Transparent protective connector cap.\u003c\/p\u003e\n\u003cp\u003e(4) Installation manual and safety datasheet.\u003c\/p\u003e\n\u003ch2\u003eLogistics and Packaging\u003c\/h2\u003e\n\u003cp\u003eOrders are processed immediately, with a standard delivery window of 2-7 days when payment finish. All units undergo rigorous inspection before being housed in anti-static industrial packaging to prevent ESD damage during transit. Shipment is facilitated via premium global carriers including DHL, FEDEX, and UPS, providing real-time tracking and climate-controlled handling to ensure the hardware arrives in factory-perfect condition.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and Application FAQs\u003c\/h2\u003e\n\u003cp\u003eQ1: Can I use this 1.0m probe with a 9m Proximitor sensor?\u003c\/p\u003e\n\u003cp\u003eA1: No. The total electrical length of the probe plus the extension cable must match the Proximitor’s calibration (e.g., a 1.0m probe requires a 4.0m extension cable for a 5m system, or an 8.0m extension for a 9m system).\u003c\/p\u003e\n\u003cp\u003eQ2: What happens if the gap is set outside the linear range?\u003c\/p\u003e\n\u003cp\u003eA2: If the gap is too close or too far, the output voltage will \"flatline,\" causing the monitoring system to report a \"Not OK\" status or provide inaccurate vibration readings, potentially missing a high-vibration event.\u003c\/p\u003e\n\u003cp\u003eQ3: Is the 21504-00-12-10-02 compatible with non-ferrous shaft materials?\u003c\/p\u003e\n\u003cp\u003eA3: This probe is calibrated for AISI 4140 steel. If your shaft is made of stainless steel or aluminum, the scale factor (mV\/mil) will change significantly, necessitating a custom calibration or a different Proximitor model.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518888239277,"sku":"21504-00-12-10-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-21504-00-12-10-02-8-mm-standard-mount-probe-cb2wf14na3r.jpg?v=1766981156","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-21504-00-12-10-02-8-mm-standard-mount-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}