{"product_id":"allen-bradley-mox720-p4668e-80026-518-01-dc-switching-power-supply-powerflex-series","title":"Allen-Bradley MOX720-P4668E 80026-518-01 DC Switching Power Supply PowerFlex Series","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley MOX720-P4668E 80026-518-01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eMOX720-P4668E 80026-518-01\u003c\/strong\u003e, serves as a DC switching power supply unit utilized for regulated multi-output power distribution within PowerFlex drive control assemblies. The module processes 380-480 V AC three-phase input and converts it into stabilized DC supply rails for downstream electronic subsystems including control logic and auxiliary circuits.\u003c\/p\u003e\n\u003ch3\u003eSuffix Interpretation Scope\u003c\/h3\u003e\n\u003cp\u003eNo validated factory-defined suffix decoding data is provided for MOX720-P4668E. The full catalog number shall be treated as a single identification string for maintenance and replacement traceability.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eMOX720-P4668E 80026-518-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.85 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e22.5 x 23.8 x 7.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-25 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e380-480 V AC 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Frequency\u003c\/td\u003e\n\u003ctd\u003e47-63 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC (+\/-0.5%)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003e30 A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak Current\u003c\/td\u003e\n\u003ctd\u003e35 A for 5 seconds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power\u003c\/td\u003e\n\u003ctd\u003e720 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e94% typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Architecture\u003c\/td\u003e\n\u003ctd\u003eMulti-output DC switching (5 V \/ 15 V \/ 24 V rails)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTariff Code\u003c\/td\u003e\n\u003ctd\u003e8537101190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eAllen-Bradley Drive Power Distribution Characteristics\u003c\/h3\u003e\n\u003cp\u003eWithin Allen-Bradley drive power architectures, the MOX720-P4668E implements controlled DC bus regulation and multi-rail distribution feeding logic-level circuits and I\/O subsystems. Firmware-level coordination between power sequencing and drive controller initialization ensures deterministic startup behavior over EtherNet\/IP based control networks. Backplane power stability directly influences module synchronization timing and control signal integrity during drive boot cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the module support hot-swapping during operation?\u003c\/strong\u003e\u003cbr\u003eA: Hot-swapping is not supported. Power isolation is required prior to removal or insertion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the backplane load behavior under full output condition?\u003c\/strong\u003e\u003cbr\u003eA: The unit delivers up to 30 A continuous output across regulated rails; load distribution is internally managed by switching regulation stages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the module operate with single-phase input?\u003c\/strong\u003e\u003cbr\u003eA: No. The unit requires 380-480 V AC three-phase input for nominal operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What happens during peak load conditions?\u003c\/strong\u003e\u003cbr\u003eA: The module supports short-term peak current of 35 A for up to 5 seconds before returning to continuous rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is firmware required for operation?\u003c\/strong\u003e\u003cbr\u003eA: No standalone firmware is executed within the power supply; coordination is managed by the drive controller system.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure complete isolation of three-phase input before installation or removal.\u003c\/li\u003e\n\u003cli\u003eVerify grounding continuity at chassis earth terminal before energization.\u003c\/li\u003e\n\u003cli\u003eMaintain separation between power cabling and low-voltage control wiring.\u003c\/li\u003e\n\u003cli\u003eConfirm correct phase sequence during input wiring connection.\u003c\/li\u003e\n\u003cli\u003eInspect connector seating alignment before applying mechanical fastening torque.\u003c\/li\u003e\n\u003cli\u003eAvoid routing signal cables parallel to high-current DC output conductors.\u003c\/li\u003e\n\u003cli\u003eEnsure ventilation clearance is maintained for thermal dissipation.\u003c\/li\u003e\n\u003cli\u003ePerform insulation resistance check prior to system startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMOX720-P4668E 80026-518-01 DC Switching Power Supply unit\u003c\/li\u003e\n\u003cli\u003eFactory sealed packaging with anti-static shielding\u003c\/li\u003e\n\u003cli\u003eProduct identification label and traceability markings\u003c\/li\u003e\n\u003cli\u003eInstallation handling protection materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo additional accessories are included unless specified in purchase order.\u003c\/p\u003e\n\u003ch3\u003eDelivery Information\u003c\/h3\u003e\n\u003cp\u003eDelivery time: 2-7 days when payment finish, shipped via DHL \/ FEDEX \/ UPS. Anti-static industrial packaging applied with reinforced shock protection layers for international transport handling stability.\u003c\/p\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":46066475761837,"sku":"MOX720-P4668E 80026-518-01","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/MOX720-P4668E80026-518-01.jpg?v=1780310478","url":"https:\/\/www.maxwellplc.com\/products\/allen-bradley-mox720-p4668e-80026-518-01-dc-switching-power-supply-powerflex-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}