{"product_id":"3309330-065-04-05-bently-nevada-3300-nsv-series-extension-cable","title":"3309330-065-04-05 Bently Nevada 3300 NSv Series Extension Cable","description":"\u003cp\u003eConfigured for signal transmission in compact machine installations, the \u003cstrong\u003eBently Nevada 3309330-065-04-05\u003c\/strong\u003e (\u003cstrong\u003e3309330-065-04-05\u003c\/strong\u003e Extension Cable) provides direct electrical connectivity within 3300 NSv transducer systems.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3309330: Base Model (3300 NSv Extension Cable)\u003c\/li\u003e\n\u003cli\u003e065: System length indicator\u003c\/li\u003e\n\u003cli\u003e04: Cable and connector configuration\u003c\/li\u003e\n\u003cli\u003e05: Agency approval rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3309330-065-04-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e20.4 x 22.2 x 3.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Loop component)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScale Factor\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and Transducer Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv extension cable is engineered to maintain high signal fidelity in small-diameter shaft applications. As part of the transducer loop, it supports eddy-current probe scaling to ensure linear output. During commissioning, gap voltage validation against -10 VDC targets remains necessary to maintain the probe within its intended linear measurement range. The cable assembly is constructed to minimize signal attenuation and support cross-talk suppression in high-density installations. Its impedance characteristics are matched to the NSv probe and Proximitor sensor, ensuring accurate rotor dynamics data acquisition without the need for additional site-specific calibration.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3309330-065-04-05 Extension Cable\u003c\/li\u003e\n\u003cli\u003e1 x Connector protection kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRouting: Route the extension cable through conduit or protected pathways to prevent mechanical damage; avoid sharp bends that may affect the characteristic impedance of the coaxial geometry.\u003c\/li\u003e\n\u003cli\u003eConnection: Ensure both the probe-to-cable and cable-to-Proximitor connections are hand-tightened and secured with the provided connector protectors to prevent moisture or oil ingress.\u003c\/li\u003e\n\u003cli\u003eGrounding: Maintain shield continuity throughout the cable run; terminate the shield at the specified grounding point on the Proximitor sensor chassis.\u003c\/li\u003e\n\u003cli\u003eVerification: After connection, perform a gap voltage check at the Proximitor terminals to verify that the entire transducer loop is operational and correctly scaled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIs this cable compatible with legacy transducer systems?\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv cable is designed to replace 3300 RAM, 3000-Series, and 7000-Series 190 systems, but it must be paired with compatible NSv-series probes and sensors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I splice this cable if it is too long for my installation?\u003c\/p\u003e\n\u003cp\u003eSplices are strictly prohibited as they alter the system impedance and signal propagation characteristics, leading to measurement inaccuracies or loss of calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the impact of the 7.87 V\/mm scale factor?\u003c\/p\u003e\n\u003cp\u003eThis scale factor defines the sensitivity of the entire transducer system; it must match the configured sensitivity in the monitor or host system for accurate readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is the temperature rating up to 177 deg C?\u003c\/p\u003e\n\u003cp\u003eHigh-temperature tolerance is necessary for close-proximity installations near turbine casings or other high-heat zones where standard cabling would degrade.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow do I identify if the connector is properly seated?\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector mechanism provides tactile and audible feedback when fully engaged; ensure the connector protector is tightened over the interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAre these cables sensitive to electromagnetic interference?\u003c\/p\u003e\n\u003cp\u003eWhile the coaxial construction provides inherent shielding, maintain separation from high-current AC power cables to prevent induced noise in the vibration signal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens if the cable shield is damaged?\u003c\/p\u003e\n\u003cp\u003eDamage to the shield compromises RFI\/EMI immunity, which may cause erratic readings or high noise floors in the vibration spectrum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this extension cable require its own power supply?\u003c\/p\u003e\n\u003cp\u003eNo, this is a passive component within the transducer loop, receiving power through the connection from the Proximitor sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026787553453,"sku":"3309330-065-04-05","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian--2_03bc859f-23b0-4b0f-abb8-9c7bb7d89df7.jpg?v=1783408133","url":"https:\/\/www.maxwellplc.com\/products\/3309330-065-04-05-bently-nevada-3300-nsv-series-extension-cable","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}