{"product_id":"330930-045-00-05-bently-nevada-proximity-probe-extension-cables-3300-nsv-series","title":"330930-045-00-05 Bently Nevada Proximity Probe Extension Cables 3300 NSv Series","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330930-045-00-05 is a high-performance, precision-impedance coaxial extension cable designed for the specialized 3300 NSv (Neosonic Standard Version) proximity transducer system. Within industrial vibration monitoring, the extension cable serves as the critical bridge, maintaining absolute electrical signal integrity over the distance separating the field-mounted proximity probe from the control-panel-mounted Proximitor sensor. Because eddy-current displacement systems depend on precise radio-frequency (RF) tuning, any variance in line impedance can distort dynamic vibration data. The 330930 series is engineered to prevent this, delivering zero-attenuation signal transfer for micro-displacement calculations.\u003c\/p\u003e\n\u003cp\u003eThis particular model features a 4.5-meter physical length configured without external protective armor, providing maximum flexibility during tight routing runs through field conduit systems. The cable utilizes a low-loss, high-frequency coaxial internal architecture encased in a fluid-resistant fluoropolymer jacket, protecting the lines from industrial contaminants, synthetic lubricating oils, and moisture tracking. Outfitted with premium gold-plated ClickLoc connectors, it delivers a secure connection that withstands severe machinery vibration without signal degradation. The inclusion of multi-agency global approvals makes it an indispensable component for asset protection loops operating in highly restricted chemical, refining, and power generation environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eValue \/ Specification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBently Nevada (Baker Hughes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e330930-045-00-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Transducer Component System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCable Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 meters (14.8 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eArmor Option\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial design, No stainless steel armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency Approvals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMulti-Agency Option (ATEX, IECEx, CSA, FM intrinsically safe)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem Electrical Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTuned to establish a complete 5.0-meter matching loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInsulation \/ Jacket Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-density Fluorinated Ethylene Propylene (FEP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Construct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGold-plated miniature ClickLoc coaxial fittings (Male\/Female)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCharacteristic Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 ohms (nominal system value)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Bend Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 inch) physical structural limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-51°C to +177°C (-60°F to +350°F) continuous exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTensile Strength Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e245 N (55 lbs) maximum pulling force\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironmental Ingress\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP66 \/ NEMA 4X equivalent when properly booted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.16 kg (0.35 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28.0 x 28.0 x 3.5 cm (11.02 x 11.02 x 1.38 inches) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch2\u003eModel Configuration Explanation\u003c\/h2\u003e\n\u003cp\u003eThe product nomenclature system for the \u003cstrong\u003e330930-045-00-05\u003c\/strong\u003e defines explicit mechanical properties, length options, and regulatory compliances needed by field engineers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330930\u003c\/strong\u003e: The core base model code for the Bently Nevada 3300 NSv Proximity Probe Extension Cable series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e045\u003c\/strong\u003e: Cable Length option. Indicates a physical cable length of exactly 4.5 meters. When combined with a standard 0.5-meter 3300 NSv proximity probe, it forms a perfectly balanced 5.0-meter electrical tuning loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Armor Option. Specifies a standard unarmored FEP jacket configuration. This optimizes the cable diameter for tight packing matrices inside narrow conduit lines or conduit trays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e: Agency Approval option. Represents the global Multi-Agency certification suite, approving the cable asset for intrinsically safe, zone-classified applications under ATEX, IECEx, FM, and CSA protocols.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Turbochargers:\u003c\/strong\u003e Linking small-footprint 3300 NSv probes mounted on compact turbocharger housings to remote vibration diagnostic enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAeroderivative Gas Turbines:\u003c\/strong\u003e Carrying high-frequency radial and axial shaft displacement information from confined internal bearing cavities to external junction barriers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrifugal Process Pumps:\u003c\/strong\u003e Bridging proximity signals from pump bearing frames across chemical skids to local monitoring termination points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-RPM Machine Tool Spindles:\u003c\/strong\u003e Transporting structural runout data from dynamic spindle heads where lightweight, flexible, unarmored routing is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyphasor Phase Reference Arrays:\u003c\/strong\u003e Extending critical timing pulses from restricted shaft zones to centralized 3500 series machinery protection racks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe 330930-045-00-05 extension cable is explicitly engineered for the 3300 NSv platform architecture. To avoid instrumentation errors or scale factor drift, it must be matched to the following component parameters:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3300 NSv Proximity Probes:\u003c\/strong\u003e Fully compatible with 3300 NSv probes featuring a 0.5-meter integral cable length, such as the metric M8 x 1 model (330909 series) or the imperial 3\/8-24 UNF model (330905 series). It will not interface with 3300 XL 8mm or legacy 7200 series probes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3300 NSv Proximitor Sensors:\u003c\/strong\u003e Must connect to a 3300 NSv Proximitor Sensor calibrated for a 5.0-meter total system length (e.g., 330980-50-XX series).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachinery Protection Infrastructure:\u003c\/strong\u003e Operates seamlessly with the Bently Nevada 3500\/42M Proximitor Seismic Monitor module or the Trendmaster and Orbit 60 distributed continuous monitoring frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMechanical Handling and Routing Steps\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the gold-plated male and female ClickLoc connectors for debris, dust, or damage before making the final physical connection.\u003c\/li\u003e\n\u003cli\u003eWhen pulling the cable through rigid field conduit arrays, do not exceed the maximum pulling tension specification of 245 N (55 lbs) to prevent internal core damage.\u003c\/li\u003e\n\u003cli\u003eMaintain a structural bend radius of no less than 25.4 mm (1.0 inch) during installation; sharp kinks or tight bends will distort the coaxial impedance, degrading calibration accuracy.\u003c\/li\u003e\n\u003cli\u003eLock the coaxial ClickLoc connection by pushing the male and female fittings together firmly and twisting until the internal detent mechanism locks.\u003c\/li\u003e\n\u003cli\u003eApply a protective silicone connector boot or self-fusing tape insulation over the joint when routing through areas exposed to continuous oil mist, steam leaks, or moisture.\u003c\/li\u003e\n\u003cli\u003eIsolate the extension cable path from high-voltage AC power lines by using independent, grounded metallic trays or conduit networks to avoid electromagnetic noise interference (EMI).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance-Matched Signal Precision:\u003c\/strong\u003e Factory-tuned to 75 ohms to maintain a flat frequency response and prevent signal reflection within the 3300 NSv tracking loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust FEP Fluoropolymer Shielding:\u003c\/strong\u003e The outer jacket offers superior resistance to corrosive chemicals, synthetic turbine oils, and moisture ingress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVibration-Proof ClickLoc Locking:\u003c\/strong\u003e Heavy-duty gold-plated connections resist structural loosening under extreme machinery vibration while maintaining ultra-low contact resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, High-Flexibility Design:\u003c\/strong\u003e The unarmored design provides a slim profile that simplifies routing through dense conduit runs and complex machinery brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe Global Compliance:\u003c\/strong\u003e Certified under ATEX, IECEx, and CSA standards, allowing safe operation in Zone 0 and Class I, Division 1 hazardous areas when paired with approved barriers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrdering Information\u003c\/h2\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eComponent Description\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSourcing Priority\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330930-045-00-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Extension Cable, 4.5m Length, Unarmored, Multi-Agency Approved\u003c\/td\u003e\n\u003ctd\u003eCore Configured Model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330905-00-13-05-02-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Probe, 3\/8-24 UNF thread, 1.3\" Case, 0.5m Cable, Multi-Agency Approved\u003c\/td\u003e\n\u003ctd\u003eCompatible Sensor Asset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330909-00-60-10-01-CN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Probe, M8 x 1 thread, 60mm Case, 1.0m Cable, Regional Approval\u003c\/td\u003e\n\u003ctd\u003eAlternative Probe Asset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330980-50-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Proximitor Sensor, 5.0m Total System Tuning, Panel-Mount Layout\u003c\/td\u003e\n\u003ctd\u003eMatching System Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e330930-045-01-05\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3300 NSv Extension Cable, 4.5m Length, Stainless Steel Armored Option\u003c\/td\u003e\n\u003ctd\u003eAlternative Cable Variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch2\u003eLogistics and Shipping\u003c\/h2\u003e\n\u003cp\u003eTo protect the precision characteristic impedance and the gold-plated pins of the ClickLoc interfaces, all shipments are secured within anti-static industrial packaging. This specialized layout prevents electrostatic discharge from compromising the insulation and provides a cushioned barrier against impacts, vibrations, and drops during transport.\u003c\/p\u003e\n\u003cp\u003eCables are coiled loosely in wide, stress-relieved loops within high-density foam enclosures to prevent structural cable memory or internal kinking of the coaxial core shield. Global delivery is fully supported via major express networks, including DHL, FedEx, and UPS, with full export documentation, international safety certificates, and real-time shipment tracking details provided.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat total system length is achieved when pairing this cable with a standard 0.5-meter probe?\u003c\/p\u003e\n\u003cp\u003eThis 4.5-meter extension cable combined with a standard 0.5-meter 3300 NSv probe forms a perfectly matched 5.0-meter electrical monitoring system loop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I use this 3300 NSv extension cable with a standard 3300 XL 8mm proximity probe?\u003c\/p\u003e\n\u003cp\u003eNo. The 3300 NSv system features distinct internal tuning and electrical parameters. Mixing NSv components with 3300 XL 5mm or 8mm hardware will cause complete system calibration failure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat physical properties does the \"00\" code indicate in the part number?\u003c\/p\u003e\n\u003cp\u003eThe \"00\" option indicates that the cable is unarmored, featuring a lightweight, highly flexible FEP jacket that is ideal for routing through protective conduit lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the 330930-045-00-05 cable certified for use in hazardous refinery locations?\u003c\/p\u003e\n\u003cp\u003eYes, the \"05\" suffix represents global Multi-Agency approvals, certifying the component as intrinsically safe for Zone 0 and Class I, Division 1 environments under ATEX, IECEx, and CSA.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the minimum recommended bend radius for this unarmored cable during installation?\u003c\/p\u003e\n\u003cp\u003eThe cable must maintain a minimum physical bend radius of 25.4 mm (1.0 inch). Bending the cable more sharply can damage the internal coaxial shielding layers and distort signal readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat material is used for the outer jacket of the cable?\u003c\/p\u003e\n\u003cp\u003eThe outer jacket is constructed from high-performance Fluorinated Ethylene Propylene (FEP), which provides excellent resistance to hot synthetic lubricants, moisture, and chemical solvents.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow do I ensure the ClickLoc connectors are properly locked in the field?\u003c\/p\u003e\n\u003cp\u003ePush the male and female gold-plated connectors together firmly and twist them until the internal detent mechanism locks, creating a reliable connection that won't loosen under machine vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this model include an integrated flexible stainless steel armor jacket?\u003c\/p\u003e\n\u003cp\u003eNo, this specific model is unarmored. If your application requires an integrated stainless steel armor sleeve, you should specify the \"01\" armor option (part number 330930-045-01-05) instead.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518848295085,"sku":"330930-045-00-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330930-045-00-05-3300-nsv-extension-cable-kclmw0k0wzv.jpg?v=1766980369","url":"https:\/\/www.maxwellplc.com\/products\/330930-045-00-05-bently-nevada-proximity-probe-extension-cables-3300-nsv-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}