{"product_id":"330910-00-16-10-02-00-bently-nevada-3300-xl-nsv-proximity-probes","title":"330910-00-16-10-02-00 Bently Nevada 3300 XL NSv Proximity Probes","description":"\u003cp\u003eEngineered for non-contacting vibration measurements in spatial constraints, the \u003cstrong\u003eBently Nevada 330910-00-16-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330910-00-16-10-02-00\u003c\/strong\u003e Proximity Probe) provides high-frequency eddy-current signal conversion for rotating machinery.\u003c\/p\u003e\n\u003ch3\u003ePart Number Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase Architecture: 330910 - 3300 NSv Proximity Probe\u003c\/li\u003e\n\u003cli\u003eUnthreaded Body Section: 00 - 0 mm unthreaded portion\u003c\/li\u003e\n\u003cli\u003eTotal Probe Case Length: 16 - 160 mm insertion length\u003c\/li\u003e\n\u003cli\u003eIntegral Cable Length: 10 - 1.0 meter (39 in) standard lead\u003c\/li\u003e\n\u003cli\u003eTermination and Protection: 02 - Miniature coaxial ClickLoc connector with standard cable\u003c\/li\u003e\n\u003cli\u003eHazardous Certifications: 00 - Not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003e330910-00-16-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit Weight\u003c\/td\u003e\n\u003ctd\u003e0.14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Dimensions\u003c\/td\u003e\n\u003ctd\u003e1.8 x 1.6 x 110 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal Limits\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExcitation Draw\u003c\/td\u003e\n\u003ctd\u003ePassive component (0 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Thread\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 with stainless steel armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Design\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTransducer Operating Mechanics\u003c\/h3\u003e\n\u003cp\u003eThis Narrow Side-View sensor relies on radio-frequency modulation to track relative distance changes between the probe tip face and a conductive shaft target. It maintains a standard scale factor of 7.87 V\/mm (200 mV\/mil). Because of its localized electromagnetic field design, it delivers accurate readings on shaft diameters under 51 mm or flat surfaces under 15 mm where standard 8 mm probes experience edge effects. Proper signal linearity is achieved by adjusting the mechanical gap until the static output registers between -9 Vdc and -11 Vdc.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330910-00-16-10-02-00 3300 NSv Proximity Probe (M10 x 1 threaded case, 160 mm length, 1.0 m integral armored cable with ClickLoc connector)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread Engagement: Thread the M10 x 1 housing into the machine mounting port, observing a recommended torque of 5.1 N m (45 in-lb) and a strict maximum ceiling of 33.9 N m (300 in-lb).\u003c\/li\u003e\n\u003cli\u003eTarget Parameters: Ensure the target diameter is at least 8.9 mm, though 13 mm is preferred to preserve absolute scale factor linearity.\u003c\/li\u003e\n\u003cli\u003eGap Voltage Tuning: Set the cold gap position using a digital voltmeter across the Proximitor monitor terminals to verify the -10 Vdc target operating center.\u003c\/li\u003e\n\u003cli\u003eLead Routing: Anchor the armored cable away from high-voltage motor feeds to eliminate induced electrical noise on the high-frequency carrier wave.\u003c\/li\u003e\n\u003cli\u003eConnection Locking: Push the ClickLoc connector pairs together firmly until an audible snap verifies complete pin seating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat specific machinery layout requires the NSv probe series?\u003c\/p\u003e\n\u003cp\u003eIt is built for centrifugal air compressors, refrigeration units, and process gas compressors with restricted internal clearance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this probe be paired with standard 8 mm system components?\u003c\/p\u003e\n\u003cp\u003eNo, NSv probes require matching NSv extension cables and NSv Proximitor sensors to maintain proper electrical calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens if the monitored shaft is smaller than 30 mm?\u003c\/p\u003e\n\u003cp\u003eShafts under 30 mm (1.2 in) introduce localized target curvature that alters the nominal scale factor, requiring specific calibration checks.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the probe require direct electrical grounding to the machine casing?\u003c\/p\u003e\n\u003cp\u003eThe probe body is grounded through the machine mounting threads, but the coaxial shield must be managed to prevent ground loops.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the pull strength rating of the cable joint?\u003c\/p\u003e\n\u003cp\u003eThe proprietary CableLoc design provides 220 N (50 lb) of pull strength resistance between the cable and the probe tip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the integral cable protected against harsh chemical environments?\u003c\/p\u003e\n\u003cp\u003eYes, the lead features an outer stainless steel armor sheath combined with chemical-resistant jacketing material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the minimum flat target diameter needed for accurate readings?\u003c\/p\u003e\n\u003cp\u003eA minimum flat target diameter of 8.9 mm (0.35 in) is required for basic signal return.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this unit replace legacy 3000-series 190 systems?\u003c\/p\u003e\n\u003cp\u003eYes, but upgrading from older 3000 or 7000 series systems requires replacing the probe, extension cable, and Proximitor sensor simultaneously.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025981165741,"sku":"330910-00-16-10-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian9_f72a62f4-daef-438a-9430-2b903558b249.jpg?v=1783668856","url":"https:\/\/www.maxwellplc.com\/products\/330910-00-16-10-02-00-bently-nevada-3300-xl-nsv-proximity-probes","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}