{"product_id":"330910-00-11-10-02-05-bently-nevada-3300-xl-series-proximity-probe","title":"330910-00-11-10-02-05 Bently Nevada 3300 XL Series Proximity Probe","description":"\u003cp\u003eConfigured for non-contact shaft displacement measurement within the 3300 XL 8 mm Proximity Transducer System, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330910-00-11-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330910-00-11-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probe) provides direct physical and electrical execution of dynamic gap signal acquisition.\u003c\/p\u003e\n\u003ch3\u003eModel Configuration Matrix\u003c\/h3\u003e\n\u003cp\u003eThe 330910-00-11-10-02-05 probe serves as the primary sensor interface for radial vibration, axial position, and speed measurement applications. It is designed for installation in compatible transducer housing assemblies and requires a matched Proximitor sensor for output signal conditioning.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330910-00-11-10-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.14 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.8 cm x 1.5 cm x 110.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-40 deg C to +125 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive (Driven by Proximitor)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMaterial\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eStainless Steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330910 probe utilizes an eddy-current sensing coil to detect shaft movement. During installation, the probe must be scaled to ensure output linearity relative to the target material. Technicians must perform gap voltage validation, targeting -10 VDC as the operational midpoint, to maintain consistent rotor dynamics monitoring. This process minimizes signal distortion and ensures accurate frequency response for vibration analysis. Proper cross-talk suppression techniques are required during cable routing to prevent electromagnetic interference between adjacent probe channels, which preserves the fidelity of the raw signal sent to the protection monitors.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e330910 8 mm Proximity Probe assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegral connector (ClickLoc type)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard probe mounting hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInstallation and technical documentation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMount the probe in the machine casing, maintaining the required standoff distance from the target surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse lock nuts to secure the probe position after establishing the operational gap.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnect the probe cable to the extension cable and Proximitor sensor, ensuring the ClickLoc connector is fully tightened to provide a stable, low-resistance connection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVerify the gap voltage using a digital multimeter at the Proximitor sensor output during machine standstill.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnsure cabling is shielded and segregated from high-power AC lines to reduce potential for noise-induced measurement error.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is this probe interchangeable with different cable lengths?\u003c\/p\u003e\n\u003cp\u003eA: No, the 3300 XL transducer system is calibrated as a matched set consisting of the probe, extension cable, and Proximitor; modifying lengths voids calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can the probe be used in hazardous area applications?\u003c\/p\u003e\n\u003cp\u003eA: The probe is intrinsically safe when installed as part of an approved system configuration; consult the official system control drawing for zone compatibility.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How do I check for probe saturation?\u003c\/p\u003e\n\u003cp\u003eA: Saturation occurs if the probe is moved too close to the target, resulting in voltage levels approaching 0 VDC, which indicates the sensor is out of its linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the probe tip susceptible to damage?\u003c\/p\u003e\n\u003cp\u003eA: The tip is made of a reinforced plastic; avoid mechanical impacts during installation, as damage to the tip will alter the sensing coil properties and measurement accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can it measure non-metallic targets?\u003c\/p\u003e\n\u003cp\u003eA: The eddy-current principle requires a conductive target material; non-metallic targets will not generate the necessary signal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How does ambient temperature affect the probe?\u003c\/p\u003e\n\u003cp\u003eA: The probe is compensated for temperature effects between -40 deg C and +125 deg C, provided the Proximitor sensor remains within its specified operating range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the purpose of the stainless steel housing?\u003c\/p\u003e\n\u003cp\u003eA: It provides chemical resistance against process fluids and physical protection in high-vibration industrial settings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How is the probe cable protected?\u003c\/p\u003e\n\u003cp\u003eA: The probe is typically supplied with an integrated protective armor to guard against mechanical damage and environmental contaminants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45378088304813,"sku":"330910-00-11-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330910-00-11-10-02-05-proximity-probes-keirou4bodj.jpg?v=1764225476","url":"https:\/\/www.maxwellplc.com\/products\/330910-00-11-10-02-05-bently-nevada-3300-xl-series-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}