{"product_id":"330730-80-02-00-bently-nevada-3300-xl-11mm-series-extension-cable","title":"330730-80-02-00 Bently Nevada 3300 XL 11mm Series Extension Cable","description":"\u003cp\u003eConfigured for Specific Technical Task in System\/Network Name, the \u003cstrong\u003eBently Nevada 330730-80-02-00\u003c\/strong\u003e (\u003cstrong\u003e330730\u003c\/strong\u003e Extension Cable) provides direct physical\/electrical execution. It acts as the critical coaxial transmission link that conveys high-frequency RF signals between an 11 mm proximity probe and a 3300 XL Proximitor sensor without introducing impedance mismatches or signal attenuation.\u003c\/p\u003e\n\u003ch3\u003eCode Sequence Parameter Selection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330730\u003c\/strong\u003e: Base model designation for the 3300 XL 11 mm Extension Cable family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-80\u003c\/strong\u003e: Cable Length Option defining a nominal span of 8.0 meters (26.2 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-02\u003c\/strong\u003e: Connector and Cable Option specifying a standard coaxial cable equipped with an integrated connector protector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-00\u003c\/strong\u003e: Agency Approval Option dictating no hazardous area approvals or certifications are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330730-80-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e29.0 x 29.0 x 3.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive electrical component with zero direct power draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Mass Density\u003c\/td\u003e\n\u003ctd\u003e45 g\/m (0.5 oz\/ft) nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial Matrix\u003c\/td\u003e\n\u003ctd\u003eCoaxial configuration with integrated synthetic connector protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatching Probe Matrix\u003c\/td\u003e\n\u003ctd\u003e3300 XL 11 mm Proximity Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTariff Code\u003c\/td\u003e\n\u003ctd\u003e8537101190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eImpedance Matching and Cross-Talk Suppression\u003c\/h3\u003e\n\u003cp\u003eThe 330730-80-02-00 is engineered to maintain standard electrical properties that support proper eddy-current probe scaling within the complete 9.0 meters transducer system loop. Proper installation ensures the loop achieves the designated gap voltage validation targeting -10 VDC at the linear midpoint. The coaxial shielding architecture provides cross-talk suppression against adjacent high-voltage machinery lines, preserving the phase data precision needed to analyze dynamic rotor dynamics without distortion.\u003c\/p\u003e\n\u003ch3\u003ePackage List\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bently Nevada 330730-80-02-00 Extension Cable Assembly\u003c\/li\u003e\n\u003cli\u003e1 x Integrated Coaxial Connector Protector Sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCable Routing and Interconnect Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum Bend Radius Constraints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eObserve a minimum bend radius of 25.4 mm (1.0 inch) during structural routing to avoid causing internal insulation deformation or shielding separation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Protector Deployment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSlide the integrated silicone rubber protector over the mated ClickLoc connection point to shield the coaxial pins from moisture, oil, and atmospheric dust.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConduit Isolation Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRun the extension cable through dedicated metal conduits separate from high-current AC lines to minimize external noise pickup and electromagnetic fields.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTerminal Junction Box Shielding\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTerminate the cable shielding termination properly at the Proximitor housing ground bar, ensuring zero ground loops exist between the machine casing and the monitor rack.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this extension cable support hot-swapping while the monitoring channel loop is active?\u003c\/p\u003e\n\u003cp\u003eYes, but disconnecting the coaxial junction immediately interrupts the circuit, forcing the monitor to read an open fault condition and suppressing downstream alarms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens to the eddy-current probe scaling if this 8.0-meters line is combined with a 9.0-meters probe?\u003c\/p\u003e\n\u003cp\u003eThe system will experience severe impedance imbalances, which invalidates the scale factor and prevents the loop from achieving proper calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this specific extension cable line be modified or shortened manually in the field?\u003c\/p\u003e\n\u003cp\u003eNo, altering the physical physical length changes the calibrated internal capacitance, which ruins the precision of the transducer system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the integrated connector protector modify the physical installation routine?\u003c\/p\u003e\n\u003cp\u003eIt provides environmental sealing for the ClickLoc union, blocking out cutting fluids and oil mist commonly found around bearing housings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the 45 g\/m weight parameter affect how the cable must be supported along structural runs?\u003c\/p\u003e\n\u003cp\u003eYes, mechanical clips must secure the line every 1.0 meter to prevent high vibration fatigue from causing conductor wear.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat baseline resistance value indicates that the internal conductor shielding remains intact?\u003c\/p\u003e\n\u003cp\u003eA center-to-shield resistance reading approaching infinity confirms the internal insulation layers have suffered no physical breach.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWill this non-armored standard cable configuration tolerate direct exposure to high-pressure washdowns?\u003c\/p\u003e\n\u003cp\u003eNo, the standard jacket needs the protection of an external conduit or junction box if exposed to direct water sprays.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this option configuration be connected to older 3300 8 mm probe series?\u003c\/p\u003e\n\u003cp\u003eNo, it is tuned solely for the electrical characteristics and dimensions of the 3300 XL 11 mm proximity sensor platform.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025262104749,"sku":"330730-80-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xianxian_6.jpg?v=1783781952","url":"https:\/\/www.maxwellplc.com\/products\/330730-80-02-00-bently-nevada-3300-xl-11mm-series-extension-cable","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}