{"product_id":"330703-06-000-080-10-02-00-bently-nevada-proximity-probes-3300-xl-11-mm","title":"330703-06-000-080-10-02-00 Bently Nevada Proximity Probes 3300 XL 11 mm","description":"\u003cp\u003eConfigured for precise non-contact displacement measurement in industrial monitoring architectures, the \u003cstrong\u003eBently Nevada 330703-06-000-080-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330703-06-000-080-10-02-00\u003c\/strong\u003e Proximity Probes) provides direct physical signal generation based on proximity to conductive targets.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: 3300 XL 11 mm\u003c\/li\u003e\n\u003cli\u003eThread Size: M14 x 1.5\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length: 60 mm\u003c\/li\u003e\n\u003cli\u003eTotal Case Length: 80 mm\u003c\/li\u003e\n\u003cli\u003eCable Length: 1.0 meter (3.3 feet)\u003c\/li\u003e\n\u003cli\u003eConnector: Miniature coaxial ClickLoc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330703-06-000-080-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e111 x 2.5 x 2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to 177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive transducer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; TSI Properties\u003c\/h3\u003e\n\u003cp\u003eThe probe facilitates eddy-current probe scaling for accurate gap measurement between the sensor tip and the observed rotating component. Accurate gap voltage validation is required to ensure the system output maintains a nominal -10 VDC target at the center of the linear range. Precise installation is required to manage rotor dynamics and ensure that signals are not influenced by improper mounting or potential cross-talk suppression issues arising from proximity to other sensor probes or metallic structural elements.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e1 x 330703-06-000-080-10-02-00 Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Threaded lock nut\u003c\/li\u003e\n\u003cli\u003e1 x Installation manual\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: Ensure the M14 x 1.5 thread is engaged securely in the mounting bracket; avoid overtightening to prevent structural deformation of the probe case.\u003c\/li\u003e\n\u003cli\u003eGap Setting: Adjust the probe distance using a feeler gauge to achieve the specified initial gap voltage, typically centered around -10 VDC.\u003c\/li\u003e\n\u003cli\u003eGrounding: Ensure the sensor tip is isolated from the mounting bracket if the system design requires electrical isolation to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003eRouting: Route the miniature coaxial cable away from high-current power cables to prevent electromagnetic noise interference in the signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the purpose of the 11 mm tip diameter?\u003c\/p\u003e\n\u003cp\u003eThe 11 mm diameter provides an extended linear range compared to 5 mm or 8 mm probes, suitable for monitoring applications requiring larger displacement coverage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the cable be field-repaired if cut?\u003c\/p\u003e\n\u003cp\u003eField repair of the coaxial cable is not recommended as it alters the impedance and affects the calibrated accuracy of the proximity system.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens if the gap voltage exceeds -10 VDC?\u003c\/p\u003e\n\u003cp\u003eIf the gap voltage drifts outside the specified range, the monitoring system may trigger an alarm or indicate a fault due to the signal approaching non-linear regions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the ClickLoc connector compatible with standard BNC?\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connector is a proprietary design; use only compatible extension cables to maintain signal integrity and connection reliability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the probe require a specific proximity housing?\u003c\/p\u003e\n\u003cp\u003eThe M14 x 1.5 thread requires a matching threaded bore or bracket to ensure proper axial alignment with the rotating shaft surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the probe operate in high-temperature environments?\u003c\/p\u003e\n\u003cp\u003eThe probe is engineered for operation up to 177 deg C; ensure the selected cable and connector are also rated for the environment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow should the probe be tested after installation?\u003c\/p\u003e\n\u003cp\u003ePerform a static gap test by varying the distance to a target material and measuring the output voltage to verify the probe's sensitivity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the probe sensitive to target material?\u003c\/p\u003e\n\u003cp\u003eThe proximity system is calibrated for a specific material (typically 4140 steel); using a different target material will necessitate a scaling factor adjustment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026817077421,"sku":"330703-06-000-080-10-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian8_54816000-12c1-4c77-810a-59ccd1db827d.jpg?v=1782790611","url":"https:\/\/www.maxwellplc.com\/products\/330703-06-000-080-10-02-00-bently-nevada-proximity-probes-3300-xl-11-mm","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}