{"product_id":"330703-000-100-10-02-05-bently-nevada-proximity-probes-3300-xl","title":"330703-000-100-10-02-05 Bently Nevada Proximity Probes 3300 XL","description":"\u003cp\u003eConfigured for non-contact shaft displacement measurement in 3300 XL vibration monitoring networks, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330703-000-100-10-02-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330703\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probes) provides direct electrical execution. The probe assembly operates with eddy-current sensing principles for radial vibration, thrust position, and rotor shaft gap monitoring when connected to compatible extension cables and Proximitor sensor assemblies.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Reference\u003c\/h3\u003e\n\u003cp\u003eThe supplied ordering code identifies a factory-configured 3300 XL 11 mm reverse-mount proximity probe assembly. Exact suffix interpretation depends on the matched extension cable and Proximitor configuration within the 3300 XL transducer system. Mechanical fit, total system length, and connector style must remain matched across all connected components.\u003c\/p\u003e\n\u003ch3\u003eElectrical and Mechanical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330703-000-100-10-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003e3300 XL 11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003eEddy-current proximity probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eReverse mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensing Method\u003c\/td\u003e\n\u003ctd\u003eNon-contact eddy-current displacement measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Probe Diameter\u003c\/td\u003e\n\u003ctd\u003e11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Interface\u003c\/td\u003e\n\u003ctd\u003eCompatible with 3300 XL Proximitor systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Application\u003c\/td\u003e\n\u003ctd\u003eShaft vibration and position monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Interface\u003c\/td\u003e\n\u003ctd\u003eRequires matched extension cable assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eDependent on installed transducer system configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive probe element, powered through Proximitor sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003eApprox. 260 x 180 x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Signal Scaling Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL transducer architecture maintains calibrated eddy-current response through matched probe, extension cable, and Proximitor combinations. Probe scaling accuracy depends on maintaining the specified total electrical length and connector continuity across the complete transducer loop.\u003c\/p\u003e\n\u003cp\u003eGap voltage validation is commonly performed during commissioning to verify probe positioning relative to the rotor target surface. Typical installation practice checks for stable negative bias voltage behavior near the nominal -10 VDC operating region before vibration data acquisition is enabled.\u003c\/p\u003e\n\u003cp\u003eCross-talk suppression is affected by probe spacing, conduit routing, and shield grounding continuity. Parallel routing of multiple probe cables within the same metallic conduit should be minimized where high vibration channel density exists.\u003c\/p\u003e\n\u003ch3\u003eTechnical Service Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the probe operate as a standalone sensor without a Proximitor assembly?\u003cbr\u003eA: No. The probe requires a compatible 3300 XL Proximitor sensor and matched extension cable to generate calibrated output signals.\u003c\/p\u003e\n\u003cp\u003eQ: Does the probe support direct hot replacement during machine operation?\u003cbr\u003eA: Replacement procedures depend on machine protection logic and channel bypass strategy. Probe removal can interrupt vibration monitoring channels and should follow plant maintenance procedures.\u003c\/p\u003e\n\u003cp\u003eQ: What target material is required for proper eddy-current response?\u003cbr\u003eA: Conductive metallic shaft materials are required. Calibration response varies with target metallurgy and system configuration.\u003c\/p\u003e\n\u003cp\u003eQ: Is connector torque control required during installation?\u003cbr\u003eA: Yes. Excessive connector torque may damage threaded interfaces or affect shield continuity. Standard instrument connector torque practices should be followed.\u003c\/p\u003e\n\u003cp\u003eQ: Can probe cables share conduit space with motor power wiring?\u003cbr\u003eA: Separation from high-energy conductors is recommended to reduce induced electrical noise and maintain signal stability.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation and Wiring Practices\u003c\/h3\u003e\n\u003cp\u003eInstall the probe using the specified reverse-mount hardware arrangement and maintain axial alignment toward the monitored shaft surface. Avoid excessive bending radius near the probe body and connector termination points.\u003c\/p\u003e\n\u003cp\u003eMaintain shield grounding continuity according to the transducer system installation manual. Ground loops between monitor racks and field junction points should be avoided.\u003c\/p\u003e\n\u003cp\u003eVerify probe gap voltage after final mounting and before machine startup. Rotor surface finish, shaft eccentricity, and bracket rigidity can affect initial signal stability.\u003c\/p\u003e\n\u003cp\u003eRoute transducer cables separately from variable-frequency drive output wiring, contactor cabinets, and high-current power conductors.\u003c\/p\u003e\n\u003ch3\u003eOrder Fulfillment Details\u003c\/h3\u003e\n\u003cp\u003e(1) Shipment includes the configured 330703-000-100-10-02-05 probe assembly.\u003c\/p\u003e\n\u003cp\u003e(2) Extension cable and Proximitor sensor are supplied separately unless specified in the procurement scope.\u003c\/p\u003e\n\u003cp\u003e(3) Protective anti-static packaging and industrial shock isolation materials are applied during shipment preparation.\u003c\/p\u003e\n\u003cp\u003e(4) Matching mounting accessories and transducer system hardware are available for associated 3300 XL monitoring installations.\u003c\/p\u003e\n\u003ch3\u003eLogistics and Shipment Handling\u003c\/h3\u003e\n\u003cp\u003eTypical dispatch cycle: 2-7 days when payment finish.\u003cbr\u003eShipment methods include DHL, FedEx, or UPS international industrial logistics services.\u003cbr\u003ePackaging method uses sealed anti-static protective wrapping with reinforced export carton containment for vibration monitoring hardware transportation.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518866088109,"sku":"330703-000-100-10-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330703-000-100-10-02-05-3300-xl-11-mm-proximity-probes-hlstkcj1o5q.jpg?v=1766980527","url":"https:\/\/www.maxwellplc.com\/products\/330703-000-100-10-02-05-bently-nevada-proximity-probes-3300-xl","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}