{"product_id":"330194-00-07-10-05-bently-nevada-3300-xl-series-proximity-probes","title":"330194-00-07-10-05 Bently Nevada 3300 XL Series Proximity Probes","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330194-00-07-10-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330194-00-07-10-05\u003c\/strong\u003e Proximity Probes, operates as a dedicated hardware component for eddy-current probe scaling and rotor dynamics monitoring within industrial rotating machinery protection networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown And Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e330194: Base model designation for the 3300 XL 8 mm Extended Temperature Range probe with M10 x 1 thread and armor.\u003c\/li\u003e\n\u003cli\u003e00: Unthreaded length option of 0 mm.\u003c\/li\u003e\n\u003cli\u003e07: Minimum case length option of 70 mm.\u003c\/li\u003e\n\u003cli\u003e10: Total cable length option of 1.0 meter.\u003c\/li\u003e\n\u003cli\u003e05: Agency approval option including CSA, ATEX, and IECEx certifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330194-00-07-10-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.24 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e35 x 24 x 2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-52 deg C to +100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive transducer powered via Proximitor sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics And Gap Voltage Validation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGap Voltage Target: Configured to output a direct voltage proportional to distance, targeting -10 VDC to -12 VDC during cold static positioning.\u003c\/li\u003e\n\u003cli\u003eEddy-Current Scaling: Translates magnetic field fluctuations into precise displacement signals for radial vibration and axial position monitoring.\u003c\/li\u003e\n\u003cli\u003eCross-Talk Suppression: Employs coaxial shielding and matched electrical matching networks to isolate high-frequency interference on extended cable runs.\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Delivers linear output performance from 0 Hz (static position) up to 10 kHz (dynamic vibration) across fluid-film bearing setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBill Of Delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bently Nevada 330194-00-07-10-05 Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Integrated probe tip with 1.0 meter armored cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Mounting And Cabling Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread Engagement: Install the M10 x 1 threaded body into the machine housing while ensuring maximum thread engagement does not exceed 15 mm to prevent mechanical binding.\u003c\/li\u003e\n\u003cli\u003eTorque Specifications: Apply calibrated torque wrenches to avoid over-tightening the probe case against the mounting aperture.\u003c\/li\u003e\n\u003cli\u003eCable Routing: Keep coaxial signal leads clear of high-voltage motor power cables to minimize electromagnetic coupling into the monitoring channel.\u003c\/li\u003e\n\u003cli\u003eGrounding Standards: Terminate probe shield drains exclusively at the Proximitor sensor ground stud to avoid ground loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What is the primary function of the 330194-00-07-10-05 probe?\u003c\/p\u003e\n\u003cp\u003eAnswer: It converts physical distance between the probe tip and a conductive target into an electrical voltage signal for vibration analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: Does this sensor require external electrical power?\u003c\/p\u003e\n\u003cp\u003eAnswer: No, it operates passively, receiving excitation current from a compatible 3300 XL Proximitor Sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What thread size does the probe housing feature?\u003c\/p\u003e\n\u003cp\u003eAnswer: The unit is machined with an M10 x 1 thread pattern for direct machinery port insertion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What is the maximum allowable thread engagement?\u003c\/p\u003e\n\u003cp\u003eAnswer: Thread engagement must be kept under 15 mm to avoid structural binding or thread stripping during installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: Can this ETR probe be paired with standard extension cables?\u003c\/p\u003e\n\u003cp\u003eAnswer: Yes, extended temperature range components are fully compatible with standard 3300 XL extension cables.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What is the standard static gap voltage setting?\u003c\/p\u003e\n\u003cp\u003eAnswer: The gap is typically adjusted to yield between -10 VDC and -12 VDC during initial cold alignment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What hazardous location certifications apply to this part?\u003c\/p\u003e\n\u003cp\u003eAnswer: It includes CSA, ATEX, and IECEx agency approval options for explosive industrial environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion: What is the weight of the packaged unit?\u003c\/p\u003e\n\u003cp\u003eAnswer: The estimated shipping weight of the item is 0.24 kg.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025521463469,"sku":"330194-00-07-10-05","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian--3_33186dad-2cb9-4097-9f2e-6ae27fc6e994.jpg?v=1783655942","url":"https:\/\/www.maxwellplc.com\/products\/330194-00-07-10-05-bently-nevada-3300-xl-series-proximity-probes","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}