{"product_id":"330180-x1-00-mod-145004-63-bently-nevada-proximitor-sensor-3300-xl-series","title":"330180-X1-00 MOD 145004-63 Bently Nevada Proximitor Sensor 3300 XL Series","description":"\u003cp\u003eConfigured for transducer signal conditioning in machine protection systems, the \u003cstrong\u003eBently Nevada 330180-X1-00 MOD 145004-63\u003c\/strong\u003e (\u003cstrong\u003e330180-X1-00\u003c\/strong\u003e Proximitor Sensor) provides direct physical and electrical execution for eddy-current probe interfaces.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e330180: Base Model (3300 XL Proximitor Sensor)\u003c\/li\u003e\n\u003cli\u003eX1: System Length Option (11 for 1.0 m, 51 for 5.0 m, 91 for 9.0 m)\u003c\/li\u003e\n\u003cli\u003e00: Not Required (Agency Approval\/Mounting)\u003c\/li\u003e\n\u003cli\u003eMOD 145004-63: Factory modification designator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330180-X1-00 MOD 145004-63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.22 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e8.8 x 3.5 x 7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +177 deg C (Up to +260 deg C with High-Temp cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e-17.5 to -26 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e200 mV\/mil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 Hz to 15 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL Proximitor sensor provides accurate eddy-current probe scaling for rotor dynamics analysis. During commissioning, gap voltage validation against the nominal -10 VDC target is required to verify the linear measurement range of the transducer loop. High-frequency carrier synchronization is utilized for cross-talk suppression, enabling multiple sensors to operate on the same rotor shaft without signal interference. Proper shielding and coaxial connection integrity are necessary to maintain signal fidelity in high-speed rotating machinery applications.\u003c\/p\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330180-X1-00 MOD 145004-63 Proximitor Sensor\u003c\/li\u003e\n\u003cli\u003e1 x Technical documentation package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDIN-Rail Mounting: Secure the sensor to a 35 mm DIN rail using the integrated clip mechanism; ensure a clearance of at least 5 mm between adjacent sensors for thermal dissipation.\u003c\/li\u003e\n\u003cli\u003eGrounding: Maintain a low-impedance ground path between the Proximitor case and the instrument rack or panel ground bus to minimize common-mode noise.\u003c\/li\u003e\n\u003cli\u003eCabling: Use only Bently Nevada specified coaxial cables for probe extension; ensure all connector couplings are tightened finger-tight plus 1\/4 turn.\u003c\/li\u003e\n\u003cli\u003eSignal Routing: Maintain physical separation between Proximitor signal wiring and AC power or high-voltage lines to prevent electromagnetic induction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the consequence of exceeding the 15 kHz frequency response limit?\u003c\/p\u003e\n\u003cp\u003eOperation above 15 kHz will result in signal attenuation and phase shift, causing errors in high-frequency vibration data interpretation and diagnostic analysis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I use a 5.0 meter extension cable with a 1.0 meter system length sensor?\u003c\/p\u003e\n\u003cp\u003eNo, the Proximitor is factory-calibrated for a specific total system length (probe + extension). Mismatched lengths will introduce significant scaling errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the gap voltage verified?\u003c\/p\u003e\n\u003cp\u003eUse a digital multimeter to measure the DC voltage at the Proximitor output terminals while the probe is at a known mechanical gap from the target.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this module require firmware updates?\u003c\/p\u003e\n\u003cp\u003eThe 330180 is an analog signal conditioner and does not contain firmware. It operates as a continuous-time component without software configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the significance of the -2 V DC to -18 V DC gap voltage range?\u003c\/p\u003e\n\u003cp\u003eThis range defines the active linear region of the transducer; outside of this, the sensor will saturate or cutoff, losing valid vibration displacement data.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I install this sensor in high-temperature zones?\u003c\/p\u003e\n\u003cp\u003eStandard operation is up to +177 deg C; however, with the specified High-Temp cable, the system can withstand environments up to +260 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the sensor output susceptible to cable length impedance?\u003c\/p\u003e\n\u003cp\u003eYes, the high-frequency carrier signal is tuned for specific cable capacitance; incorrect cable types will degrade the signal and increase noise floors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the purpose of the 200 mV\/mil sensitivity?\u003c\/p\u003e\n\u003cp\u003eThis allows the system to resolve minute shaft displacements into measurable voltage changes, facilitating precise orbit and vibration measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026793812141,"sku":"330180-X1-00 MOD 145004-63","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/330180-X1-00_1_2_4.jpg?v=1783404376","url":"https:\/\/www.maxwellplc.com\/products\/330180-x1-00-mod-145004-63-bently-nevada-proximitor-sensor-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}