{"product_id":"330130-085-00-02-bently-nevada-3300-xl-standard-extension-cable","title":"330130-085-00-02 Bently Nevada 3300 XL Standard Extension Cable","description":"\u003cp\u003eConfigured for signal transmission continuity in 3300 XL proximity transducer systems, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330130-085-00-02\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330130\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard Extension Cable) provides direct electrical execution between the proximity probe and Proximitor Sensor assembly. The cable assembly maintains calibrated impedance characteristics required for eddy-current signal stability and phase consistency across 3300 XL TSI monitoring networks.\u003c\/p\u003e\n\u003ch3\u003eCable Configuration Reference\u003c\/h3\u003e\n\u003cp\u003eNo official suffix matrix was supplied with the provided material. The ordering code identifies a factory-configured extension cable assembly within the 3300 XL transducer product family.\u003c\/p\u003e\n\u003ch3\u003eMechanical and Electrical Specifications\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330130-085-00-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eStandard Extension Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e3300 XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Function\u003c\/td\u003e\n\u003ctd\u003eProbe-to-Proximitor interconnection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eFactory molded coaxial connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielding\u003c\/td\u003e\n\u003ctd\u003eContinuous shielded coaxial construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003eApprox. 32 cm x 28 cm x 8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to +177 deg C cable exposure depending on installation environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component, no direct power consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL eddy-current transducer systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eFixed industrial routing with shield grounding practices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCross-Talk Suppression Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe cable assembly maintains controlled impedance matching between the probe and Proximitor interface circuit. Routing separation between adjacent transducer cables reduces capacitive coupling and minimizes cross-talk during high-speed shaft vibration monitoring. Parallel routing with variable-frequency drive output cables should be avoided to reduce induced electrical noise.\u003c\/p\u003e\n\u003cp\u003eShield continuity must remain uninterrupted through the complete transducer chain. Field splicing or connector modification changes system calibration characteristics and can affect proximity signal linearity.\u003c\/p\u003e\n\u003ch3\u003eTechnical Service Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the extension cable be shortened in the field?\u003cbr\u003eA: Cable length modification changes the calibrated electrical characteristics of the transducer system and is not recommended.\u003c\/p\u003e\n\u003cp\u003eQ: Does the cable require independent grounding?\u003cbr\u003eA: Shield grounding is normally established through the transducer system installation method. Multiple shield termination points should be avoided.\u003c\/p\u003e\n\u003cp\u003eQ: Is the cable compatible with non-3300 XL probes?\u003cbr\u003eA: Electrical matching depends on the complete transducer system configuration. Mixing different probe families can alter scale factor response.\u003c\/p\u003e\n\u003cp\u003eQ: Can the cable be routed inside metallic conduit?\u003cbr\u003eA: Metallic conduit installation is acceptable when conduit grounding and cable bend radius requirements are maintained.\u003c\/p\u003e\n\u003cp\u003eQ: Does the cable support hot replacement during system operation?\u003cbr\u003eA: Disconnecting the cable during operation interrupts the transducer signal path and can generate monitoring alarms or invalid gap readings.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eInstallation and Handling Practices\u003c\/h3\u003e\n\u003cp\u003eMaintain separation between transducer cables and high-energy power conductors. Avoid routing near motor output wiring, switching contactors, or high-frequency inverter assemblies.\u003c\/p\u003e\n\u003cp\u003eMinimum bend radius should be maintained during installation to prevent shield deformation and center conductor stress. Connector threads must be tightened evenly without over-torque loading.\u003c\/p\u003e\n\u003cp\u003eDo not permit moisture ingress at connector interfaces. During cabinet installation, secure excess cable length using non-metallic clamps to reduce vibration-induced mechanical wear.\u003c\/p\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003e(1) Shipment includes one factory-assembled 3300 XL extension cable.\u003cbr\u003e(2) Protective connector caps may be included depending on packaging configuration.\u003cbr\u003e(3) Compatible probes and Proximitor sensors are supplied separately unless specified in the purchase order.\u003cbr\u003e(4) Optional mounting accessories and cable clamps are available for panel and field routing installations.\u003c\/p\u003e\n\u003ch2\u003eLogistics and Packaging Notes\u003c\/h2\u003e\n\u003cp\u003eTypical dispatch cycle: 2-7 days after payment confirmation. Shipment handled through DHL, FedEx, or UPS logistics channels depending on destination region.\u003c\/p\u003e\n\u003cp\u003eEach unit is packed using anti-static industrial packaging materials with connector isolation protection and reinforced outer carton containment for long-distance transport conditions.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518866219181,"sku":"330130-085-00-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330130-085-00-02-3300-xl-standard-extension-cable-di5zujdasxi.jpg?v=1766980532","url":"https:\/\/www.maxwellplc.com\/products\/330130-085-00-02-bently-nevada-3300-xl-standard-extension-cable","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}