{"product_id":"330130-080-03-00-bently-nevada-extension-cable-3300-xl-series","title":"330130-080-03-00 Bently Nevada Extension Cable 3300 XL Series","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330130-080-03-00\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330130\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtension Cable, operates as a dedicated hardware component for high-frequency RF signal transmission within 3300 XL 8mm Proximity Transducer platforms. Configured for proximity loop connections in machinery protection systems, the hardware establishes low-attenuation electrical continuity between the inductive probe tip and the external Proximitor Sensor unit. The coaxial parameters are structured to transmit raw impedance modifications to the processing monitor without phase lag.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Options Matrix\u003c\/h3\u003e\n\u003cp\u003eThe discrete alphanumeric suffix options define the absolute length, structural armoring, and safety classification status of the cable hardware:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330130\u003c\/strong\u003e: Base model number for the 3300 XL 8mm Extension Cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e080\u003c\/strong\u003e: Cable Length option. Designates a nominal length of 8.0 meters (26.2 feet).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e03\u003c\/strong\u003e: Armor and Cable option. FluidLoc coaxial cable configuration with stainless steel braided armor sleeving.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Agency Approval option. Standard uncertified version without hazardous area approvals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCore Hardware Parameters\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330130-080-03-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.45 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e28.0 cm x 28.0 cm x 5.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive hardware element (0.0 W operational load)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSystem Impedance\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e75 ohms nominal\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCore Insulation\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFluorinated Ethylene Propylene (FEP) jacket\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Loop Tuning and Signal Preservation\u003c\/h3\u003e\n\u003cp\u003eThe electrical characteristics of the 330130 cable assembly are matched to precise eddy-current probe scaling matrices. Modifications to the physical length or localized dielectric properties distort loop impedance, generating errors during gap voltage validation steps targeting -10 VDC at the monitor rack. High-density internal shielding ensures robust cross-talk suppression between adjacent transducer paths, isolating subtle high-frequency rotor dynamics from surrounding industrial electromagnetic noise.\u003c\/p\u003e\n\u003ch3\u003ePackaging List\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 Bently Nevada 330130-080-03-00 Armored Extension Cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 Removable silicone ClickLoc interface protection boot.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransducer Cable Routing Directives\u003c\/h3\u003e\n\u003ch3\u003eCoaxial Connection Sequence\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eInspect internal mating surfaces of ClickLoc connectors to confirm they are dry and free of particulate debris.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngage the male and female connector halves firmly until the internal mechanical detent locks into place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSlide the silicone connector protector completely over the connection interface to isolate it from fluids.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Layout Constraints\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMaintain a strict minimum physical bend radius of 25.4 mm (1.0 inch) along all segments of the run.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSeparate the sensor line from high-voltage AC electrical lines using dedicated grounded conduit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFix the armored jacket to structural supports at 300 mm intervals to isolate the line from machinery vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransducer Interconnect FAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eCan this 8.0-meter extension cable be combined with a 1.0-meter proximity probe?\u003c\/p\u003e\n\u003cp\u003eYes. A 1.0-meter probe combined with an 8.0-meter cable establishes a 9.0-meter system length, matching a calibrated 9.0-meter 3300 XL Proximitor module.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat occurs if the FEP cable core is crushed or flattened under the armor?\u003c\/p\u003e\n\u003cp\u003eCrushing modifies the internal core-to-shield capacitance, shifting the eddy-current probe scaling parameters and inducing measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the stainless steel braided armor support direct exposure to mechanical scrape hazards?\u003c\/p\u003e\n\u003cp\u003eYes. The armor layer provides physical defense against abrasion, but the cable must still avoid tight pinches or crushing impacts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat specific reading points to an open-circuit failure within the coaxial core?\u003c\/p\u003e\n\u003cp\u003eThe companion 3500 series monitor rack reports a \"Not OK\" status fault and clamps the transducer output to its maximum negative rail limit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan field technicians cut and resplice this cable to reduce physical slack?\u003c\/p\u003e\n\u003cp\u003eNo. Cutting shifts the absolute line impedance, which invalidates the pre-calibrated scale factor of 7.87 V\/mm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does oil contamination inside the ClickLoc connection affect performance?\u003c\/p\u003e\n\u003cp\u003eOil shifts the baseline gap voltage validation target away from the nominal -10 VDC point, causing false drift or vibration alarms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the FEP insulation jacket resilient against continuous exposure to industrial turbine oils?\u003c\/p\u003e\n\u003cp\u003eYes. The fluoropolymer formulation provides robust chemical resistance against degradation from exposure to synthetic or mineral-based lubricants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhere should the electrical shield layer of this extension cable be grounded?\u003c\/p\u003e\n\u003cp\u003eThe shield must remain isolated from the machine frame and terminate to earth ground solely at the Proximitor Sensor terminal chassis block.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518807335085,"sku":"330130-080-03-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330130-080-03-00-3300-xl-8mm-extension-cable-jbfjrpcko0x.jpg?v=1766979350","url":"https:\/\/www.maxwellplc.com\/products\/330130-080-03-00-bently-nevada-extension-cable-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}