{"product_id":"330106-05-30-05-02-cn-bently-nevada-3300-xl-series-reverse-mount-proximity-probe","title":"330106-05-30-05-02-CN Bently Nevada 3300 XL Series Reverse Mount Proximity Probe","description":"\u003cp\u003eConfigured for non-contact shaft displacement sensing within machinery diagnostic platforms, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330106-05-30-05-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330106\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReverse Mount Proximity Probe) provides direct physical\/electrical execution. While procurement listings sometimes index this part designation under extension cable classifications due to its integrated coaxial line, the 330106 catalog sequence designates a complete reverse-mount eddy-current probe containing an integrated transducer lead. The component generates a continuous electrical voltage output that scales directly with the mechanical distance between the probe tip face and a rotating conductive target.\u003c\/p\u003e\n\u003ch3\u003eHardware Configuration Matrix\u003c\/h3\u003e\n\u003ch3\u003eSuffix Nomenclature\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330106\u003c\/strong\u003e: Base configuration for the 3300 XL 8 mm reverse mount proximity probe built with M10 x 1 metric threads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Unthreaded length option representing 0.5 inches of smooth case section.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e30\u003c\/strong\u003e: Overall case length option representing 3.0 inches of total housing structure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Total length option establishing a 0.5 meter (1.6 feet) integrated cable length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector design without structural connector insulation sleeves.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCN\u003c\/strong\u003e: Chinese NEPSI hazardous area certification and regulatory compliance framework approval code.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensional and Electrical Attributes\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330106-05-30-05-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.35 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e25.0 cm x 18.0 cm x 4.5 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnder 12 mA supplied via continuous -24 VDC Proximitor loop infrastructure\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSystem Linear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) nominal tracking boundary\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTarget Scale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) electrical tracking output\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMounting Thread\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10 x 1 metric mechanical pitch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTip Insulation Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePolyphenylene Sulfide (PPS) high-performance polymer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Transducer Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe transducer hardware works through high-frequency eddy-current field generation to map minute position changes. System calibration relies on accurate gap voltage validation, requiring a target setting of -10 VDC to position the operational state precisely at the center of the 80 mil linear window.\u003c\/p\u003e\n\u003cp\u003eThe physical construction integrates optimized cross-talk suppression geometries. This optimization allows multi-probe arrays to track complex rotor dynamics across close-range X-Y orthogonal planes without mutual electromagnetic interference or signal degradation.\u003c\/p\u003e\n\u003ch3\u003eBill of Materials\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 Bently Nevada 330106-05-30-05-02-CN reverse mount probe assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 Factory-terminated miniature coaxial ClickLoc electrical interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 Integral 0.5 meter low-loss RF transmission cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Framework\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torquing Bounds\u003c\/strong\u003e: Tighten the metric reverse mount body within a range of 7.5 N-m (66 in-lbf) standard to a maximum limit of 22.6 N-m (200 in-lbf).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing Mandates\u003c\/strong\u003e: Isolate the 0.5 meter integrated line inside dedicated grounded conduits to block external induction paths.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBend Radius Limits\u003c\/strong\u003e: Observe a strict 25.4 mm (1.0 inch) minimum bend radius constraint across all cable positioning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Performance FAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eWhat specific mechanical target is required to achieve the nominal 200 mV\/mil scale factor?\u003c\/p\u003e\n\u003cp\u003eThe sensor performance is factory-calibrated against a standard AISI 4140 steel target. Alternate shaft materials alter the scale factor and require system recalibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat does the CN suffix alter within the hardware structure?\u003c\/p\u003e\n\u003cp\u003eThe CN suffix does not change the internal sensor circuitry. It indicates compliance testing and official certification for installation under Chinese NEPSI hazardous area conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this 0.5 meter integrated probe cable link directly to a 9 meter Proximitor sensor?\u003c\/p\u003e\n\u003cp\u003eNo, a 0.5 meter probe must be combined with an 4.5 meter extension cable to reach the 5.0 meter system length required by the standard 5 meter Proximitor module.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow should the miniature ClickLoc coaxial connection be insulated inside a machine housing?\u003c\/p\u003e\n\u003cp\u003eUse a dedicated connector silicone sleeve or specialized insulation tubing to prevent the exposed coaxial outer shell from grounding against metal machinery parts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat behavior occurs if the probe tip comes into direct contact with the spinning shaft?\u003c\/p\u003e\n\u003cp\u003ePhysical contact destroys the PPS plastic tip molding and internal coil assembly, causing the Proximitor loop output voltage to drop to its lower saturation limit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the purpose of the 0.5 inch unthreaded length option code?\u003c\/p\u003e\n\u003cp\u003eThe unthreaded length allows safe insertion through specific machine port clearances, preventing thread binding inside the entry wall during reverse mount installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this probe assembly support standard hot-swapping during active machinery operation?\u003c\/p\u003e\n\u003cp\u003eYes, the passive coaxial line can be disconnected or connected while the Proximitor is powered. The monitoring system will register a temporary open-circuit fault.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat indicates an out-of-tolerance gap installation during commissioning?\u003c\/p\u003e\n\u003cp\u003eIf the static DC voltage measured at the Proximitor output terminal deviates significantly from the -10 VDC center point, the probe position must be mechanically readjusted.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518762868909,"sku":"330106-05-30-05-02-CN","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330106-05-30-05-02-cn-extension-cable-nt1kiqt3rug.jpg?v=1766977060","url":"https:\/\/www.maxwellplc.com\/products\/330106-05-30-05-02-cn-bently-nevada-3300-xl-series-reverse-mount-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}