{"product_id":"330106-05-30-05-00-00-bently-nevada-reverse-mount-probes-3300-xl","title":"330106-05-30-05-00-00 Bently Nevada Reverse Mount Probes 3300 XL","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330106-05-30-05-00-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as the primary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330106\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReverse Mount Probe utilized to execute non-contact shaft vibration and position measurement across 3300 XL monitoring platforms. The probe assembly operates through eddy-current sensing principles and interfaces directly with calibrated extension cable and Proximitor components to maintain linear displacement signal transmission.\u003c\/p\u003e\n\u003ch3\u003eModel Configuration Reference\u003c\/h3\u003e\n\u003cp\u003eThe supplied ordering code identifies a factory-configured reverse mount probe assembly within the 3300 XL 8 mm transducer product line. No official field suffix matrix was provided with the source material.\u003c\/p\u003e\n\u003ch3\u003eElectrical and Mechanical Data\u003c\/h3\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth class=\"last:pe-10\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330106-05-30-05-00-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003e3300 XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eReverse Mount Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasurement Principle\u003c\/td\u003e\n\u003ctd\u003eEddy-current proximity sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Style\u003c\/td\u003e\n\u003ctd\u003eReverse mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003eApprox. 26 cm x 18 cm x 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eDependent on complete transducer system installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive probe element, supplied through Proximitor system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Interface\u003c\/td\u003e\n\u003ctd\u003eCompatible with 3300 XL transducer systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Construction\u003c\/td\u003e\n\u003ctd\u003eShielded coaxial assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eGap Voltage Verification Characteristics\u003c\/h3\u003e\n\u003cp\u003e3300 XL reverse mount probes operate with calibrated gap voltage response referenced through the associated Proximitor sensor. During commissioning, static target positioning is commonly adjusted toward approximately -10 VDC gap voltage to maintain linear operating range for shaft displacement monitoring.\u003c\/p\u003e\n\u003cp\u003eProbe target material composition and surface finish directly influence eddy-current response stability. Excessive conductive debris accumulation near the probe tip can alter baseline voltage conditions and measurement repeatability.\u003c\/p\u003e\n\u003ch3\u003eEngineering Service Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the probe assembly be installed without the matched extension cable?\u003cbr\u003eA: System calibration depends on the complete probe, extension cable, and Proximitor combination specified for the transducer assembly.\u003c\/p\u003e\n\u003cp\u003eQ: Does reverse mounting affect polarity or scaling?\u003cbr\u003eA: Mounting orientation changes physical installation geometry only. Electrical scaling remains dependent on calibrated transducer components.\u003c\/p\u003e\n\u003cp\u003eQ: Is direct field splicing permitted on the probe cable?\u003cbr\u003eA: Cable splicing changes impedance characteristics and is not recommended for calibrated eddy-current systems.\u003c\/p\u003e\n\u003cp\u003eQ: Can the probe be routed near motor power conductors?\u003cbr\u003eA: Separation from high-energy conductors is recommended to reduce induced electrical interference.\u003c\/p\u003e\n\u003cp\u003eQ: Does the probe require external excitation power?\u003cbr\u003eA: Excitation is supplied through the compatible Proximitor sensor assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSite Wiring and Installation Practices\u003c\/h3\u003e\n\u003cp\u003eInstall the reverse mount probe with sufficient mechanical clearance to prevent contact between the probe tip and rotating shaft surfaces during transient machine movement.\u003c\/p\u003e\n\u003cp\u003eMaintain shield continuity throughout the transducer routing path. Avoid parallel cable routing alongside variable-frequency drive output conductors or switching cabinet busbars.\u003c\/p\u003e\n\u003cp\u003eConnector threads should be secured evenly to prevent vibration-induced loosening. Excessive cable bending near the probe body should be avoided to reduce mechanical stress on the coaxial conductor assembly.\u003c\/p\u003e\n\u003ch3\u003eOrdering Information\u003c\/h3\u003e\n\u003cp\u003e(1) Shipment includes one configured 3300 XL reverse mount probe assembly.\u003cbr\u003e(2) Extension cables and Proximitor sensors are supplied separately unless specified.\u003cbr\u003e(3) Protective packaging includes anti-static shielding and connector protection.\u003cbr\u003e(4) Optional mounting accessories depend on machine installation geometry.\u003c\/p\u003e\n\u003ch2\u003eTransit and Packaging Details\u003c\/h2\u003e\n\u003cp\u003eStandard processing time: 3-5 days after payment completion. International shipment available through DHL, FedEx, or UPS carrier services.\u003c\/p\u003e\n\u003cp\u003eThe probe assembly is packed using anti-static industrial packaging materials with reinforced connector isolation and vibration-resistant carton protection for export handling conditions.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518866186413,"sku":"330106-05-30-05-00-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330106-05-30-05-00-00-3300-xl-8-mm-reverse-mount-probes-0y244mig3rk.jpg?v=1766980530","url":"https:\/\/www.maxwellplc.com\/products\/330106-05-30-05-00-00-bently-nevada-reverse-mount-probes-3300-xl","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}