{"product_id":"330104-00-03-05-02-00-bently-nevada-proximity-probes-3300-xl-8-mm","title":"330104-00-03-05-02-00 Bently Nevada Proximity Probes 3300 XL 8 mm","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330104-00-03-05-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as the primary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probes utilized to execute non-contacting shaft displacement and vibration measurements across 3300 XL 8 mm Proximitor Sensor platforms. It directly translates the physical distance between the probe tip and the target rotating shaft into a high-frequency electrical signal, tracking dynamic mechanical movement within industrial machinery monitoring loops.\u003c\/p\u003e\n\u003ch3\u003eOptions and Configuration Structure\u003c\/h3\u003e\n\u003cp\u003eThe alphanumeric suffixes appended to the base model indicate specific hardware dimensions, thread arrangements, and connector selections defined below:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330104\u003c\/strong\u003e: Base Part Number for 3300 XL 8 mm Proximity Probe (M10 x 1 thread, non-armor configuration).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00 (Unthreaded Length Option)\u003c\/strong\u003e: 0 mm unthreaded length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-03 (Overall Case Length Option)\u003c\/strong\u003e: 30 mm overall case length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-05 (Total Length Option)\u003c\/strong\u003e: 0.5 meter (1.6 feet) cable length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-02 (Connector Option)\u003c\/strong\u003e: Miniature coaxial ClickLoc connector with connector protector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-00 (Agency Approval Option)\u003c\/strong\u003e: No specialized hazardous area approvals selected.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Parameters\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330104-00-03-05-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.14 kg (0.31 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e15.0 cm x 15.0 cm x 4.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C (-60 deg F to +351 deg F)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive inductive sensor (powered via associated Proximitor loop)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm (0.31 in)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10 x 1 metric thread\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when referenced to AISI 4140 steel target\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils), spanning from 0.25 mm to 2.25 mm (10 to 90 mils) gap\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe hardware assembly operates through eddy-current probe scaling, utilizing an internal coil to project an alternating RF field into the target material. During mechanical gapping procedures, technicians must execute a gap voltage validation to ensure the steady-state output reads a target value of -10 VDC. This exact voltage marks the center of the calibrated 2.0 mm linear range, ensuring symmetric headroom for recording positive and negative shaft deflections.\u003c\/p\u003e\n\u003cp\u003eIn multi-probe installations tracking complex rotor dynamics, cross-talk suppression is achieved by enforcing rigid spatial limits. Orthogonal X-Y pairs or adjacent axial sensors must maintain a minimum physical tip-to-tip clear distance of 40 mm to prevent the electromagnetic fields of adjacent probes from causing modulation errors or signal interference.\u003c\/p\u003e\n\u003ch3\u003eHardware Technical FAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this passive proximity probe assembly support hot-swapping while the protection loop is powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eA: Yes, the probe can be disconnected or reconnected at the extension cable or Proximitor interface while the monitoring rack is online. The sensor contains no active semiconductor components and will not experience electrical latch-up or damage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the impact on measurement accuracy if the integral cable is shortened below 0.5 meters?\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eA: Shortening or splicing the factory cable changes the specific electrical resonance and impedance properties of the loop. This disrupts the 7.87 V\/mm scale factor calibration, rendering the proximity data inaccurate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does a non-magnetic target material alter the electrical performance of the 330104 probe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eA: The standard factory scale factor relies on a magnetic AISI 4140 steel target. Materials such as aluminum or copper possess different magnetic properties, reducing eddy-current losses and significantly compressing the linear measurement range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical and Electrical Installation Procedures\u003c\/h3\u003e\n\u003col class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Assembly Limits\u003c\/strong\u003e: Insert the M10 x 1 threaded body into the tapped mounting port. Ensure the threads match perfectly to prevent cross-threading damage. Tighten the locknuts to a maximum torque setting of 4.5 N-m (40 in-lb) to prevent distortion of the internal sensing tip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShield Continuity Control\u003c\/strong\u003e: Keep the coaxial shield completely isolated from local machine frames or structural grounds along the cable run. The shield must maintain electrical isolation until it interfaces with the terminal strip inside the Proximitor enclosure, which routes to a single-point instrument ground.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Routing Protection\u003c\/strong\u003e: Lay all flexible cables inside dedicated metal conduit or cable trays to prevent mechanical pinching, shearing, or abrasion. Keep the cable run clear of high-voltage motor supply lines to minimize electromagnetic noise coupling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Joint Protection\u003c\/strong\u003e: Verify that the ClickLoc coaxial interface remains entirely free of moisture, industrial oil, or carbon dust prior to coupling. Slide the attached connector protector over the connection point to lock out environmental contaminants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eInventory Packaging List\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eBase Package Elements: One (1) 330104-00-03-05-02-00 Proximity Probe with an integrated 0.5-meter coaxial cable and factory-terminated miniature ClickLoc connector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAncillary Kit Contents: One (1) pre-installed industrial silicone connector protector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequired External Components (Ordered Separately): Compatible 3300 XL extension cables and matching 3300 XL Proximitor Sensors calibrated for a 5.0-meter or 9.0-meter total system length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping and Handling Specifications\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eLogistics Delivery Time: 2-7 days when payment finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRouting Services: Dispatched through verified global carriers including DHL, FEDEX, or UPS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePreservation Standards: Packaged inside dedicated anti-static industrial packaging to neutralize electrostatic risks and preserve component integrity during transit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518835744941,"sku":"330104-00-03-05-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330104-00-03-05-02-00-proximity-probes-3th22h1mq00.jpg?v=1766980024","url":"https:\/\/www.maxwellplc.com\/products\/330104-00-03-05-02-00-bently-nevada-proximity-probes-3300-xl-8-mm","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}