{"product_id":"330103-00-05-90-02-05-bently-nevada-3300-xl-proximity-probe","title":"330103-00-05-90-02-05 Bently Nevada 3300 XL Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330103-00-05-90-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330103\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contacting shaft displacement and vibration tracking within 3300 XL system networks.\u003c\/p\u003e\n\u003ch3\u003eNomenclature Configuration \u0026amp; Hardware Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330103\u003c\/strong\u003e: Core assembly identification for the 3300 XL 8 mm proximity probe mechanical form factor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Specifies a 0 mm minimum unthreaded case section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e: Configures a 50 mm minimum total threaded case length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90\u003c\/strong\u003e: Dictates a 9.0 meters (29.5 feet) integral hardware cable length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e: Equips a miniature coaxial ClickLoc connector on a standard unarmored cable jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e: Assigns factory certified CSA, ATEX, and IECEx agency approvals for hazardous location loops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePhysical and Electrical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330103-00-05-90-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e1.8 x 1.5 x 113 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +177 deg C continuous sensor tip limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor architecture driven entirely via RF energy from Proximitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Thread size\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 metric thread profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrated Cable Length\u003c\/td\u003e\n\u003ctd\u003e9.0 meters (29.5 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Total Length\u003c\/td\u003e\n\u003ctd\u003e9.0 meters combined system balance without extension line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 8 mm sensing tip relies on uniform eddy-current probe scaling rules to transform magnetic field variations into precise physical distance parameters. During active rotor dynamics monitoring, the probe tip generates constant radio frequency field interactions, tracking the target shaft position to establish proper gap voltage validation (-10 VDC targets) across high-speed machinery bearing surfaces.\u003c\/p\u003e\n\u003ch3\u003eShipping Kit Inventory\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330103-00-05-90-02-05 3300 XL 8 mm Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Coaxial Terminal Protection Sleeve Set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Mechanical Mounting Protocol\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Insertion \u0026amp; Torquing Steps\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThread the M10 x 1 sensor body into the tapped installation port by hand until the tip nears the target shaft surface.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum of 5 full thread engagements within the mounting boss to ensure long-term mechanical stability against vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical Cable Support\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFasten the 9.0 meters standard unarmored cable using dedicated insulated clamps to prevent high-frequency signal noise.\u003c\/li\u003e\n\u003cli\u003eEnforce a strict minimum physical bending radius limit of 25.4 mm (1.0 in) along all physical junction layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransducer Hardware FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat nominal target parameter defines standard gap voltage validation during field balancing?\u003c\/p\u003e\n\u003cp\u003eThe primary instrumentation loop requires a gap voltage validation targeting -10 VDC at the center of the sensor linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this 9.0 meters probe module be coupled directly with an additional 9.0 meters extension cable?\u003c\/p\u003e\n\u003cp\u003eNo, the complete system loop must equal the designated match length; pairing with an incorrect line shifts the electrical calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does moisture entry inside the miniature ClickLoc connector affect signal feedback?\u003c\/p\u003e\n\u003cp\u003eMoisture inside the ClickLoc terminal alters loop impedance, corrupts the eddy-current probe scaling, and induces measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the specific mechanical function of the 0 mm unthreaded option selection?\u003c\/p\u003e\n\u003cp\u003eThe 0 mm parameter provides continuous external threading along the 50 mm case, maximizing depth adjustability in thin brackets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs an external cooling supply mandatory for the probe when tracking high-temperature turbines?\u003c\/p\u003e\n\u003cp\u003eNo, the passive materials are rated to function continuously at temperatures up to +177 deg C without separate cooling lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the unarmored cable jacket tolerate continuous immersion in industrial machine lubricants?\u003c\/p\u003e\n\u003cp\u003eYes, the polymer insulation layer is engineered to withstand direct contact with common mineral and synthetic turbine oils.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat mechanical hazard develops if the probe tip makes physical contact with a spinning target?\u003c\/p\u003e\n\u003cp\u003ePhysical contact destroys the internal coil assembly instantly, causing the proximity loop to saturate to its maximum fault voltage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the coaxial shield loop isolated from secondary stray electrical ground currents?\u003c\/p\u003e\n\u003cp\u003eThe connector protection sleeve kit must be installed around the junction point to isolate the shield wire from machine frames.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026670407853,"sku":"330103-00-05-90-02-05","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xianxian_09_06a6ab5e-da1a-4248-a681-bc3f2df9e166.jpg?v=1783593278","url":"https:\/\/www.maxwellplc.com\/products\/330103-00-05-90-02-05-bently-nevada-3300-xl-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}