{"product_id":"330101-30-63-15-02-cn-bently-nevada-proximity-probe-3300-xl-series","title":"330101-30-63-15-02-CN Bently Nevada Proximity Probe 3300 XL Series","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330101-30-63-15-02-CN\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eserves as the primary\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330101\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probe utilized to execute non-contact shaft vibration and position measurements across Turbine Supervisory Instrumentation (TSI) platforms. The hardware converts the physical distance between the 8 mm probe tip and a conductive target surface into an analog voltage output, transmitting static and dynamic variables back to an external processing circuit.\u003c\/p\u003e\n\u003ch3\u003eOption Selection Matrix\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBase Model (330101):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, unarmored standard cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eUnthreaded Length Option (30):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.0 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eOverall Case Length Option (63):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6.3 inches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTotal Length Option (15):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1.5 meters (4.9 feet).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Option (02):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMiniature coaxial ClickLoc connector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAgency Approval Option (CN):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCSA, ATEX, and IECEx intrinsic safety certifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering Parameter Profile\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330101-30-63-15-02-CN\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.12 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.8 x 1.6 x 121 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive sensor element driven via external Proximitor driver loop\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Selection\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3\/8-24 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eUnthreaded Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e3.0 inches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e6.3 inches\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTotal Cable Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 meters (4.9 feet)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCable Armor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNone\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnector Configuration\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThis 8 mm transducer system utilizes specialized eddy-current probe scaling to establish a linear range of 2.0 mm (80 mils), outputting a standard scale factor of 7.87 V\/mm (200 mV\/mil). During physical field loop setup, calibration requires strict gap voltage validation to target a -10 VDC static baseline output, centering the probe within its linear execution limits relative to the rotor dynamics centerline. The internal coil winding geometric parameters provide enhanced cross-talk suppression, preventing inductive signal bleeding between independent probes mounted along the same mechanical plane.\u003c\/p\u003e\n\u003ch3\u003eMechanical and Electrical FAQ\u003c\/h3\u003e\n\u003cp\u003eQ: How does the lack of protective armor on the 1.5 meter cable affect mechanical routing layout?\u003c\/p\u003e\n\u003cp\u003eA: The unarmored standard cable structure reduces total hardware weight to 0.12 kg and simplifies tight-radius pathways. However, because it lacks a stainless steel braided outer jacket, the cable must be fed through dedicated external conduits to protect the inner conductor from shearing forces and mechanical compression.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 1.5 meter probe element be wired directly to a 3500 series monitoring rack?\u003c\/p\u003e\n\u003cp\u003eA: No. The processing circuit requires a complete matched electrical length of either 5.0 meters or 9.0 meters. The 1.5 meter probe must be joined to a matching 3.5 meter or 7.5 meter extension cable to maintain the calibrated 7.87 V\/mm eddy-current probe scaling.\u003c\/p\u003e\n\u003cp\u003eQ: What are the consequences of deploying this probe with less than the minimum side-view clearance?\u003c\/p\u003e\n\u003cp\u003eA: If the 8 mm tip is positioned with less than 16 mm (0.6 inches) of radial clearance from surrounding metal brackets, \"side-viewing\" interference occurs. This extra metal paths corrupts the linear calibration and invalidates the -10 VDC targets gap voltage tracking.\u003c\/p\u003e\n\u003ch3\u003eField Mechanical Installation Directives\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBracket Alignment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure the mounting bracket assembly is completely rigid. The 8 mm probe tip must be aligned true to the center of the observed shaft target and sit perpendicular to the rotating surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThread the 3\/8-24 UNF casing cleanly into the mount, ensuring a minimum of 5 full threads of mechanical engagement to withstand high-vibration rotational frequencies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSide Clearance Boundary:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMaintain a minimum clear boundary radius of 16 mm (0.6 inches) around the probe tip to fully isolate the magnetic field from structural metal edges.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Connector Booting:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnsure the miniature coaxial ClickLoc connector faces are clean of grease, snap the joint together firmly, and pull the clear insulation cylinder completely over the union to isolate the shield path from the machine chassis ground.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOrdered Item Checklist\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Package Contents:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne 330101-30-63-15-02-CN unarmored proximity probe element, matching hex locknuts, and one translucent connector insulation boot.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSeparated Ancillary Items:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtension cables, specialized panel-mount DIN-rail Proximitor sensors, and calibration disk targets must be purchased under independent hardware codes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFreight Profile and Handling Data\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLogistics Window:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDelivery time: 2-7 days when payment finish, utilizing expedited international air freight channels via DHL, FEDEX, or UPS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTransit Enclosure Spec:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSecured inside clean room anti-static industrial packaging complete with rigid linear support channels to protect the 6.3 inch case and 1.5 meter unarmored lead from physical bending or kinking.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026888052909,"sku":"330101-30-63-15-02-CN","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330101-00-28-20-02-00-proximity-probes-rc3rs23goh0.jpg?v=1766981774","url":"https:\/\/www.maxwellplc.com\/products\/330101-30-63-15-02-cn-bently-nevada-proximity-probe-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}