{"product_id":"330101-00-15-05-01-00-bently-nevada-proximity-probe-3300-xl-8-mm","title":"330101-00-15-05-01-00 Bently Nevada Proximity Probe 3300 XL 8 mm","description":"\u003cp\u003eConfigured for non-contact displacement measurement in vibration monitoring architectures, the \u003cstrong\u003eBently Nevada 330101-00-15-05-01-00\u003c\/strong\u003e (\u003cstrong\u003e330101-00-15-05-01-00\u003c\/strong\u003e Proximity Probe) provides direct physical signal execution within TSI systems.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: 3300 XL 8 mm\u003c\/li\u003e\n\u003cli\u003eThread: 3\/8-24 UNF\u003c\/li\u003e\n\u003cli\u003eCase Length: 1.5 in\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length: 0.0 in\u003c\/li\u003e\n\u003cli\u003eCable Length: 1.5 meter (4.9 feet)\u003c\/li\u003e\n\u003cli\u003eConnector: Miniature coaxial ClickLoc with protector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330101-00-15-05-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e110 x 1.5 x 1.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to 177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eN\/A (Passive transducer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; TSI Properties\u003c\/h3\u003e\n\u003cp\u003eThe probe facilitates eddy-current probe scaling for linear displacement measurement relative to metallic targets. Optimal signal conditioning requires gap voltage validation to maintain -10 VDC targets, ensuring linearity across the transducer's operating range. Effective installation must account for rotor dynamics to prevent signal distortion, while implementing cross-talk suppression by maintaining adequate spacing from adjacent probes to prevent electromagnetic interference within the monitoring network.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e1 x 330101-00-15-05-01-00 Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Threaded lock nut\u003c\/li\u003e\n\u003cli\u003e1 x Connector protector assembly\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounting: Install the probe using the 3\/8-24 UNF thread into a rigid mounting bracket; verify the thread engagement does not impede the probe tip clearance.\u003c\/li\u003e\n\u003cli\u003eGap Setting: Calibrate the initial gap to the required DC voltage offset using a feeler gauge between the probe tip and the target shaft.\u003c\/li\u003e\n\u003cli\u003eGrounding: Ensure electrical continuity between the probe case and the machine chassis unless isolated mounting is specified to mitigate ground loops.\u003c\/li\u003e\n\u003cli\u003eCabling: Secure the miniature coaxial cable using cable ties to prevent movement in high-vibration areas and to protect the ClickLoc connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the purpose of the 8 mm probe tip?\u003c\/p\u003e\n\u003cp\u003eThe 8 mm diameter is the industry standard for 3300 XL systems, providing a balanced linear range for monitoring radial vibration and axial position on most machinery.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the cable be extended beyond 1.5 meters?\u003c\/p\u003e\n\u003cp\u003eThe system is calibrated for a specific total length (probe + extension cable); changing the total length requires recalibration of the Proximitor sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the ClickLoc connector waterproof?\u003c\/p\u003e\n\u003cp\u003eThe connector is designed for industrial environments but is not submersible; ensure it is housed in a protected junction box if exposed to fluids.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens if the probe tip touches the rotating shaft?\u003c\/p\u003e\n\u003cp\u003ePhysical contact can damage the probe tip and may introduce noise or false readings; probes must be installed with a non-zero clearance gap.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the connector protector used?\u003c\/p\u003e\n\u003cp\u003eThe protector slides over the ClickLoc connection to prevent contamination and mechanical strain at the mating point between the probe and extension cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the probe sensitive to oil or lubricants?\u003c\/p\u003e\n\u003cp\u003eThe probe tip is constructed from high-temperature polymer materials compatible with most standard industrial lubricants and hydraulic oils.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I use this probe with an older 3300 series monitor?\u003c\/p\u003e\n\u003cp\u003e3300 XL probes are generally backward compatible, but system-level verification is required to confirm signal scaling matches the existing monitor cards.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow often should the probe be recalibrated?\u003c\/p\u003e\n\u003cp\u003ePeriodic inspection of the gap voltage and signal response is recommended during scheduled maintenance outages to detect potential probe degradation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026810753197,"sku":"330101-00-15-05-01-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian_3_cfbcb1f5-4bd6-4fab-9a2c-e20f0f159076.jpg?v=1781085384","url":"https:\/\/www.maxwellplc.com\/products\/330101-00-15-05-01-00-bently-nevada-proximity-probe-3300-xl-8-mm","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}