{"product_id":"2711p-t12w22a9p-allen-bradley-hmi-terminal-panelview-plus-7","title":"2711P-T12W22A9P Allen-Bradley HMI Terminal PanelView Plus 7","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 2711P-T12W22A9P\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePanelView Plus 7\u003c\/strong\u003e HMI Terminal, operates as a dedicated hardware component for graphical process visualization and operator input within EtherNet\/IP networks.\u003c\/p\u003e\n\u003ch3\u003eModel Number Nomenclature \u0026amp; Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2711P\u003c\/strong\u003e: PanelView Plus product family bulletin number.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT\u003c\/strong\u003e: Analog resistive touchscreen interface input mechanism.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12W\u003c\/strong\u003e: 12.1-inch widescreen color TFT display featuring 1280 x 800 WXGA resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e: Performance model classification providing expanded memory and dual Ethernet connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\u003c\/strong\u003e: Dual 10\/100 Base-T Ethernet communications ports supporting Ring (DLR) topology.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e: AC power input configuration (100-240 VAC at 50-60 Hz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9\u003c\/strong\u003e: Standard brand layout without custom logo configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP\u003c\/strong\u003e: Performance series hardware platform profile.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePhysical \u0026amp; Electrical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e2711P-T12W22A9P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e390 x 290 x 140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e50 VAC max (100-240 VAC, 50-60 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Type\u003c\/td\u003e\n\u003ctd\u003e12.1-inch Widescreen Color TFT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNative Resolution\u003c\/td\u003e\n\u003ctd\u003e1280 x 800 WXGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouchscreen\u003c\/td\u003e\n\u003ctd\u003eAnalog Resistive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn-Board Memory\u003c\/td\u003e\n\u003ctd\u003e512 MB RAM, 512 MB Non-Volatile Flash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Ports\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45 Ethernet, 2 x USB 2.0 Host, 1 x USB High-Speed Device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X, NEMA 12, NEMA 13, IP66 (Front Panel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEtherNet\/IP Determinism \u0026amp; Firmware Execution\u003c\/h3\u003e\n\u003cp\u003eThis terminal processes deterministic communication profiles across dual RJ45 interfaces configured for Device Level Ring (DLR) network resiliency. The unit interfaces directly with Logix-based automation controllers, relying on firmware flash compatibility to synchronize controller tags without intermediary software layers. High backplane communication efficiency prevents packet dropouts during peak system polling intervals, ensuring real-time graphical status updates and reliable control signal execution over high-speed automation backbones.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents \u0026amp; Kit Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Allen-Bradley 2711P-T12W22A9P HMI Terminal\u003c\/li\u003e\n\u003cli\u003e1 x Removable AC Power Terminal Block Connect Assembly\u003c\/li\u003e\n\u003cli\u003e1 x Factory-Sealed Mounting Clamp Set (8 Pieces)\u003c\/li\u003e\n\u003cli\u003e1 x Cutout Template and Installation Instruction Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCabinet Mounting \u0026amp; Environmental Wiring Rules\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePanel Cutout Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVerify the panel opening matches the 218 x 312 mm cutout dimensions. Ensure the cutout edges are clean and free of burrs to maintain proper seal integrity against the gasket.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Clamp Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInsert the terminal into the cutout. Install all eight mounting clamps evenly around the bezel frame, tightening screws sequentially to a maximum torque of 0.9 to 1.1 Nm to prevent bezel distortion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAC Power \u0026amp; Grounding Guidelines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect incoming AC wiring (100-240 VAC) using 14 to 18 AWG copper wire to the provided screw terminal block. Establish a dedicated low-impedance functional earth ground cable directly from the ground stud on the back chassis to the primary panel ground bus bar.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEthernet Cable Routing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute STP (Shielded Twisted Pair) Category 5e or Category 6 cables away from high-voltage AC motor drives and heavy inductive loads to minimize electromagnetic interference across the dual network ports.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem Operations \u0026amp; Diagnostics FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this terminal support direct connections to non-DLR single-port Ethernet switches?\u003c\/p\u003e\n\u003cp\u003eYes, the dual ports can operate in linear configurations or function via single connections, provided the internal switch modes match the panel IP network setup.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the maximum recommended torque for the front bezel mounting clamps?\u003c\/p\u003e\n\u003cp\u003eMounting clamp screws must be torqued strictly between 0.9 and 1.1 Nm to maintain the NEMA 4X and IP66 fluid seals without cracking the frame.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the internal flash storage user-expandable via external hardware?\u003c\/p\u003e\n\u003cp\u003eExternal storage can be expanded using standard Secure Digital (SD) cards or USB flash drives for datalogging and firmware backup operations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the 2711P-T12W22A9P be powered directly by a 24 VDC control power rail?\u003c\/p\u003e\n\u003cp\u003eNo, this specific suffix model is engineered exclusively for 100-240 VAC input power and will not function on 24 VDC supplies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat memory limits apply to runtime operator application files?\u003c\/p\u003e\n\u003cp\u003eThe Performance series platform allocates dedicated system RAM allowing runtime applications up to approximately 450 MB in size.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the touchscreen support multi-touch gestures like pinch-to-zoom?\u003c\/p\u003e\n\u003cp\u003eNo, the unit uses an analog resistive single-touch panel optimized for single-finger input, operable with industrial work gloves.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat ambient temperature limits apply when mounting the terminal inside an enclosure?\u003c\/p\u003e\n\u003cp\u003eAmbient air temperature surrounding the rear chassis must stay within 0 and 55 deg C to prevent thermal throttling of the internal processor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow are firmware revisions flashed to the device?\u003c\/p\u003e\n\u003cp\u003eFirmware updates are executed via the ControlFLASH utility over an active EtherNet\/IP connection or loaded directly using an SD card boot bundle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":47279587623085,"sku":"2711P-T12W22A9P","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/2711P-T12W22A9P_1-0.jpg?v=1787205053","url":"https:\/\/www.maxwellplc.com\/products\/2711p-t12w22a9p-allen-bradley-hmi-terminal-panelview-plus-7","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}