Configured for human-machine interface processing and operator input execution in PLC automation architectures, the Omron NS5-MQ10-V2 (NS5-MQ10 Programmable Display) provides direct physical/electrical execution.

Model Nomenclature Breakdown

• NS5: Indicates a 5.7-inch display screen class within the Omron HMI product family.
• MQ: Identifies the monochrome STN LCD hardware variant with 320 x 240 pixel resolution.
• 10: Designates the standard hardware configuration interface layout (non-Ethernet variant).
• V2: Signifies hardware version iteration 2 with upgraded internal system flash memory and compatibility enhancements.

Physical & Electrical Parameters

Backplane & Deterministic Communications

The display interfaces directly with host controllers using high-speed serial protocols. Serial communication parameters support backplane bus communication velocity Licences and deterministic data throughput via RS-232C or RS-422A/485 serial interfaces. Firmware flash compatibility ensures seamless system configuration sync with host Omron SYSMAC CS/CJ/CP series PLCs, avoiding system latency during memory map transfers or screen display refresh cycles.

Package Contents

• 1 x Omron NS5-MQ10-V2 Programmable Display
• 1 x Power Supply Connector Plug
• 4 x Panel Mounting Brackets
• 1 x Waterproof Rubber Packing Gasket

Mounting & Wiring Specifications

Mechanical Panel Cutout

• Ensure panel enclosure cutout dimensions match specified cutout frame tolerance (184.0 mm x 131.0 mm).
• Confirm the rubber gasket is seated properly around the bezel perimeter to maintain IP65 dust and water resistance.

Wiring & Power Grounding

• Connect a stable 24 VDC Class 2 power supply to the dedicated power terminal block.
• Earth the functional ground terminal using a dedicated wire with a cross-sectional area of at least 1.25 mm sq to prevent noise interference.

Thermal & Clearance Spacing

• Maintain a minimum clearance of 100 mm above and below the unit to allow free thermal convection.
• Route serial communication lines away from high-voltage AC cables to minimize electromagnetic coupling.

Technical Questions & Answers

• What is the display resolution of the NS5-MQ10-V2 unit?

  The unit features a 5.7-inch monochrome STN LCD display with a dot resolution of 320 x 240 pixels.

• Does the NS5-MQ10-V2 model feature built-in Ethernet connectivity?

  No, Ethernet interface hardware is not supported on the NS5-MQ10-V2 model variant.

• What is the total mass weight of the device?

  The unit has a standalone physical mass weight of exactly 1.0 kg.

• What are the physical enclosure outer dimensions of the unit?

  The physical dimensions are 5.4 cm in depth, 19.5 cm in width, and 14.2 cm in height.

• What power input parameters are required for operation?

  The device operates on a 24 VDC power supply circuit consuming a maximum of 15 W power.

• How is noise immunity maintained on serial communication wiring?

  Shielded twisted-pair cabling grounded at one single termination point must be used for serial links.

• What is the operating temperature range for panel installation?

  The device operates continuously in ambient panel temperatures ranging from 0 to 50 deg C.

• How is the front panel ingress protection rating achieved?

  Proper installation of the panel mounting brackets and rubber packing seal provides IP65 protection.