{"product_id":"nx1p2-9024dt-omron-sysmac-nx1p-series-cpu","title":"NX1P2-9024DT Omron Sysmac NX1P Series CPU","description":"\u003cp\u003eThe \u003cstrong\u003eOmron NX1P2-9024DT\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNX1P2-9024DT\u003c\/strong\u003e Sysmac NX1P CPU, operates as a dedicated hardware component for sequence control and motion execution within EtherCAT and EtherNet\/IP networks. Driven by a 2 ms primary task cycle, the processor executes control programs using 1.5 MB of program memory and 2 MB of variables memory. Integrated fieldbus interfaces enable real-time coordination with remote I\/O slice blocks and servo drives.\u003c\/p\u003e\n\u003ch3\u003eModel Structure \u0026amp; Functional Nomenclature\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNX1P2\u003c\/strong\u003e: Compact all-in-one CPU controller platform with integrated I\/O.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9024\u003c\/strong\u003e: Integrated I\/O hardware profile featuring 24 built-in digital I\/O points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD\u003c\/strong\u003e: Direct current (DC) logic power supply input requirement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT\u003c\/strong\u003e: Transistor output circuit configuration (PNP\/NPN switching output terminals).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications Summary\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNX1P2-9024DT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOmron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.59 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e7.1 x 12.4 x 10.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e20.4 to 28.8 VDC supply range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Task Cycle Time\u003c\/td\u003e\n\u003ctd\u003e2 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgram Memory\u003c\/td\u003e\n\u003ctd\u003e1.5 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariables Memory\u003c\/td\u003e\n\u003ctd\u003e2 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd\u003eEtherCAT Master, EtherNet\/IP, Ethernet TCP\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Industrial Networking \u0026amp; Bus Scalability\u003c\/h3\u003e\n\u003cp\u003eOperating across Profinet \/ EtherNet\/IP deterministic networks alongside EtherCAT master loops, the controller coordinates field node synchronization. Backplane bus communication velocity guarantees real-time cycle updates between the central CPU and side-attached local NX I\/O modules. The internal architecture maintains I\/O density scaling and full firmware flash compatibility through Sysmac Studio setup utilities.\u003c\/p\u003e\n\u003ch3\u003eCommercial Deliverable Items\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Omron NX1P2-9024DT Sysmac NX1P CPU Controller\u003c\/li\u003e\n\u003cli\u003e1 x Terminal Block Set for I\/O and Power Wiring\u003c\/li\u003e\n\u003cli\u003e1 x End Cover Block (NX-END02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Mounting \u0026amp; Wiring Protocol\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN Rail Mounting\u003c\/strong\u003e: Seat the upper mounting hooks onto a standard 35 mm DIN rail and press the main chassis backward until the lower DIN clip locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtherCAT Master Wiring\u003c\/strong\u003e: Connect Category 5e shielded twisted-pair cables from the EtherCAT port to downstream slave drives using RJ45 connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connection\u003c\/strong\u003e: Supply regulated 24 VDC power (20.4 to 28.8 VDC range) to the terminal block, confirming correct DC terminal polarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Grounding\u003c\/strong\u003e: Secure a dedicated functional ground conductor from the main chassis grounding point to the panel earth rail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBus Termination\u003c\/strong\u003e: Place the mandatory NX end cover module on the rightmost edge of the assembly to seal the internal backplane bus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCan local expansion NX I\/O modules be hot-swapped while the CPU is powered?\u003c\/p\u003e\n\u003cp\u003eNo. Main 24 VDC system power must be disconnected before installing or removing local side-expansion NX I\/O units.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat communication protocols are supported on the built-in Ethernet ports?\u003c\/p\u003e\n\u003cp\u003eThe unit features integrated interfaces for EtherCAT Master, EtherNet\/IP industrial protocol, and standard Ethernet TCP\/IP.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the input operating voltage range for the controller?\u003c\/p\u003e\n\u003cp\u003eThe CPU operates within a 20.4 VDC to 28.8 VDC power supply window, requiring a stable external 24 VDC power source.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow much memory is allocated for execution logic and variable storage?\u003c\/p\u003e\n\u003cp\u003eThe processor contains 1.5 MB of dedicated program memory for logic execution and 2 MB of memory for process variables.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat task cycle time does the processor core achieve during control execution?\u003c\/p\u003e\n\u003cp\u003eThe main processing core executes deterministic control loops at a fixed primary task cycle time of 2 ms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is the end cover block required on the right side of the unit?\u003c\/p\u003e\n\u003cp\u003eThe end cover protects exposed backplane contact pins and maintains proper bus termination for local I\/O expansion modules.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow are project files and parameters downloaded to the controller hardware?\u003c\/p\u003e\n\u003cp\u003ePrograms and configuration parameters are loaded directly via Sysmac Studio using an Ethernet network connection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat role does the EtherCAT Master port serve in motion applications?\u003c\/p\u003e\n\u003cp\u003eThe EtherCAT Master port transmits high-speed cyclic position and velocity data to synchronized servo drives and distributed I\/O.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Omron","offers":[{"title":"Default Title","offer_id":47306671554733,"sku":"NX1P2-9024DT","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/NX1P2-9024DT_1.jpg?v=1790220785","url":"https:\/\/www.maxwellplc.com\/ga\/products\/nx1p2-9024dt-omron-sysmac-nx1p-series-cpu","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}