The Omron NS12-TS00-V2, also cataloged as the NS12-V2 Programmable Terminal, operates as a dedicated hardware component for direct operator interface visualization and register data exchange within SYSMAC PLC platforms.

Model Number Nomenclature

• NS12: Identifies the 12.1-inch display enclosure frame size.
• T: Indicates color active-matrix TFT LCD panel construction.
• S: Designates SVGA matrix panel resolution (800 x 600 pixels).
• 00: Specifies dual RS-232C serial interface ports without integrated Ethernet circuitry.
• Ivory: Represents standard ivory-colored front bezel enclosure housing.
• V2: Generation revision designating expanded memory mapping capacity and enhanced script engine support.

Operational Hardware Specifications

Deterministic Serial Bus Execution and Firmware Architecture

The terminal processes real-time host link communication protocols to maintain high-speed serial bus data transfer rates without display lag. Internal non-volatile flash memory maintains strict firmware flash compatibility, preventing processor task latency during high I/O density scaling execution.

Factory Terminal Kit Supply

• 1 x NS12-TS00-V2 Programmable Terminal Frame
• 8 x Heavy-Duty Enclosure Mounting Brackets
• 1 x 3-Pole DC Terminal Connector Block
• 1 x Synthetic Rubber Ingress Sealing Gasket

Field Mechanical Mounting and Electrical Setup

• Cut out panel enclosure opening to exact measurements of 302.0 mm width by 228.0 mm height.
• Fit synthetic rubber seal into perimeter channel to maintain IP65 front panel sealing capability.
• Align terminal into cutout and fix all mounting clamps to a torque specification of 0.5 N m to 0.6 N m.
• Connect 24 VDC supply conductors (AWG 14 to AWG 22) into the detachable 3-pin power block.
• Ensure a minimal clear boundary of 100 mm surrounding rear ventilation grilles for adequate thermal dispersion.

Technical Performance FAQs

• What serial connection interfaces are available on the unit?

  The hardware provides two independent RS-232C serial ports for direct PLC host link communications.

• Does the TS00 configuration support direct Ethernet connection?

  No, the 00 configuration designates a unit without native Ethernet networking capabilities.

• What display resolution is featured on the 12.1-inch panel?

  The TFT active matrix screen displays an SVGA native matrix resolution of 800 x 600 pixels.

• What backlight technology is used in this hardware version?

  The display panel integrates an extended-life LED backlight array eliminating CCFL inverter reliance.

• What voltage range is acceptable for the 24 VDC input connection?

  The internal power supply accepts an operational voltage window between 20.4 VDC and 27.6 VDC.

• How are project memory downloads performed without network ports?

  Project file transfers execute via RS-232C point-to-point connections or through a rear CompactFlash memory card.

• What wire size and earthing standard apply to the functional ground pin?

  Run AWG 14 minimum copper wire directly from the FG terminal to a Class D earth ground (under 100 ohms).

• How is the hardware configuration screen accessed during startup?

  Touch two opposite diagonal corners of the touch panel simultaneously while the unit powers up.