The Omron NS10-TV00-V2, also cataloged as the NS10-V2 Programmable Terminal, operates as a dedicated hardware component for direct operator interface screen navigation and real-time PLC memory register modification within SYSMAC host networks.

Model Number Nomenclature Breakdown

• NS10: Specifies the 10.4-inch display panel housing dimensions.
• T: Indicates active-matrix TFT color display panel construction.
• V: Designates VGA screen matrix resolution (640 x 480 pixels).
• 00: Confirms dual RS-232C serial communication ports with no integrated Ethernet port.
• Ivory: Identifies the standard ivory enclosure bezel color.
• V2: Generation prefix denoting enhanced project memory allocation and expanded macro script processing support.

Physical and Electrical Specifications

Deterministic Serial Bus Execution and Firmware Architecture

The operator terminal processes high-speed serial Host Link protocols to maintain deterministic backplane bus communication velocity across connected PLC racks. System flash memory maintains strict firmware flash compatibility, preventing processor task latency during high I/O density scaling and complex macro script execution.

Factory Terminal Kit Contents

• 1 x NS10-TV00-V2 Touch Screen HMI Terminal
• 6 x Enclosure Panel Mounting Clamps
• 1 x 3-Pole DC Power Terminal Plug
• 1 x Synthetic Rubber Perimeter Sealing Gasket

Field Mechanical Mounting and Electrical Setup

• Cut panel cutout to exact dimensions of 264.0 mm horizontal by 201.0 mm vertical.
• Align the synthetic rubber gasket into the perimeter channel to ensure IP65 front panel sealing integrity.
• Seat terminal unit into cutout and secure all 6 mounting clamps to a torque specification of 0.5 N m to 0.6 N m.
• Terminate 24 VDC power wiring (AWG 14 to AWG 22) into the detachable 3-pin power block.
• Maintain a minimal 100 mm clearance around rear housing ventilation slots to ensure passive heat dissipation.

Frequently Asked Questions

• What serial interfaces are integrated into the rear chassis?

  The unit incorporates two independent RS-232C serial channels for concurrent PLC and peripheral communications.

• Does the TV00 configuration support direct Ethernet connection?

  No, the 00 suffix confirms a serial-only hardware design without native Ethernet interface circuits.

• What display panel technology drives the visual matrix?

  The hardware features a 10.4-inch active-matrix TFT display with a long-life solid-state LED backlight array.

• What voltage range is acceptable for the 24 VDC input terminal block?

  The internal power supply circuit functions within an operational voltage window between 20.4 VDC and 27.6 VDC.

• How are project memory downloads performed without Ethernet?

  Project screen files execute transfers using point-to-point RS-232C serial cables or an onboard CompactFlash card.

• What wire gauge and earthing standard apply to functional grounding?

  Run AWG 14 minimum copper wire directly from the FG pin to a Class D earth ground (under 100 ohms resistance).

• How is the internal hardware setup menu accessed at power up?

  Press two opposite diagonal corners of the touch panel simultaneously during the initial boot sequence.

• What environmental restrictions apply to panel enclosure placement?

  The ambient location must remain free from conductive dust, organic solvents, and active corrosive gases.