SEO Suite

Shopify Product Title: Bently Nevada 330930-060-03-05 3300 NSv Extension Cable

Product Type: Proximity Transducer Extension Cable

SEO Title: 330930-060-03-05 Bently Nevada 3300 NSv Extension Cable

Meta Description: Order New Bently Nevada 330930-060-03-05. In Stock, Original Pack, and Sealed. 6.0m 3300 NSv extension cable with stainless steel armor and multiple approvals.

Tags: 3300 NSv Series, Extension Cable, Proximity System, Vibration Monitoring, 330930, Asset Condition Monitoring, Eddy Current Sensor Accessories

Product Overview

The Bently Nevada 330930-060-03-05 serves as the vital signal link within the 3300 NSv (Near Surface version) Proximity Transducer System. Specifically engineered for applications with small target areas or restricted installation clearances—such as centrifugal compressors, pumps, and fluid-film bearings—this extension cable maintains the high-frequency response required for accurate vibration and position data. It ensures impedance matching between the 3300 NSv probe and the Proximitor sensor, eliminating signal distortion in critical Machinery Protection Systems (MPS). Its robust construction facilitates reliable data transmission in high-interference industrial environments, supporting the early detection of shaft instability and thermal growth.

Suffix Configuration Analysis

Engineering Code Breakdown

The model number 330930-060-03-05 defines the following physical and regulatory parameters:

• -060 (Cable Length): 6.0 metres (19.7 feet). This length must be factored into the total system calibration (typically 7.0m or 9.0m total).

• -03 (Armor Option): Stainless steel fluid-tight armor. This provides superior mechanical protection against crushing and abrasion while resisting corrosive chemical exposure.

• -05 (Agency Approval): Multiple Approvals. Certified for use in hazardous areas globally, including ATEX, IECEx, and North American (CSA/NRTL) standards for intrinsic safety.

Hardware Specifications

Site Installation Standards

Proper cable management prevents "electrical noise" from compromising transducer accuracy. Technicians must ensure that the total length of the probe plus the extension cable matches the specific calibration of the 3300 NSv Proximitor (e.g., a 1.0m probe paired with a 6.0m cable for a 7.0m system). Use specialized connector protector kits (silicon tape or heat shrink) to seal the connection between the probe and extension cable, especially in environments with high humidity or oil mist. Secure the armored conduit using padded clamps every 0.5 to 1.0 meters to prevent cable fatigue caused by structural vibrations.

System Integration Assets

The 3300 NSv system, utilizing the 330930 extension cable, is purpose-built for "Near Surface" targets where standard 8mm probes fail due to side-viewing interference or small shaft diameters. This extension cable provides the shielding necessary for clean integration into Bently Nevada 3500/42M Displacement/Siesmic Monitors or 1900/65A stand-alone monitors. Its stainless steel armor acts as a secondary Faraday cage, significantly reducing electromagnetic interference (EMI) from nearby variable frequency drives (VFDs) and high-voltage motors.

Shipping & Global Logistics

Order Processing: Dispatch occurs within 2-7 days when payment finish.

Logistics Partners: Delivery via DHL, FEDEX, or UPS Worldwide.

Packaging Integrity: All cables are shipped in original factory-sealed anti-static industrial packaging. Each armored cable is coiled according to manufacturer bend-radius specs and secured within heavy-duty cartons to prevent structural damage during international air freight.

Support & Verification FAQs

Q1: Can I use this 6.0m NSv cable with a standard 3300 XL 8mm probe?

A1: No. The 3300 NSv system uses different electrical characteristics than the 3300 XL system. Mixing components will result in severe calibration errors and incorrect vibration readings.

Q2: What is the purpose of the stainless steel armor option?

A2: The -03 armor protects the internal coaxial core from physical damage such as being stepped on or pinched in machine covers, and it prevents the cable from being dissolved by harsh synthetic oils.

Q3: How do I identify a "Multiple Approvals" cable in the field?

A3: The cable jacket or the metal tag near the connector will be marked with the -05 suffix and carry the Ex, ATEX, and CSA certification stamps required for hazardous zone operation.

Q4: Is the connector included on both ends of the extension cable?

A4: Yes, the cable comes pre-terminated with a female ClickLoc connector on the probe side and a male ClickLoc connector on the Proximitor side.