Configured for mechanical fixation of operator panels within ABB drive control assemblies, the ABB 3AUA0000013086 OPMP-01 (3AUA0000013086 Panel Holder Mounting Kit) provides a dedicated mounting interface for panel installation and positioning.

Model Identification

The 3AUA0000013086 OPMP-01 is an ABB panel mounting accessory designed for securing operator panels. The kit consists of mechanical mounting components including spacer bushings, locking nuts, and washers for panel holder installation.

Hardware Specifications

ABB Drive System Mechanical Integration

The OPMP-01 mounting kit is a passive mechanical component and does not include electrical circuits or communication interfaces. Its function is limited to physical panel support, alignment, and fastening within compatible ABB control panel assemblies.

The mechanical structure supports stable panel positioning while maintaining separation between mounting surfaces through nylon PA66 spacer bushings. The zinc-plated locking hardware provides mechanical retention during equipment operation.

Installation and Mounting Requirements

• Verify panel holder compatibility before installation.
• Install spacer bushings according to the mechanical assembly arrangement.
• Tighten locking hardware evenly to maintain panel alignment.
• Avoid excessive mechanical force that may deform mounting surfaces.
• Keep mounting components free from contamination before final assembly.
• Confirm that the installed panel does not exceed the specified dynamic load rating.

Ordering Information

• 1 x ABB 3AUA0000013086 OPMP-01 Panel Holder Mounting Kit
• Includes mechanical mounting components supplied with the kit.
• Electrical cables, operator panels, controllers, and drive modules are not included unless separately specified.

Field Installation Guidelines

Mechanical Assembly

• Install the mounting kit on a rigid support surface suitable for the panel assembly.
• Ensure all fastening points are correctly aligned before tightening.
• Maintain proper clearance around the mounted panel for service access.

Environmental Considerations

• Use the kit within the specified operating temperature range.
• Protect mechanical components from corrosive chemicals and excessive vibration.
• Inspect fastening hardware during scheduled equipment maintenance.

Frequently Asked Questions

• Is the 3AUA0000013086 OPMP-01 an electrical module?

  No. The OPMP-01 is a passive mechanical mounting accessory without power input, signal terminals, or communication functions.

• What is the maximum supported load of this mounting kit?

  The specified dynamic load rating is <=5 kg. The installed panel assembly should remain within this mechanical limit.

• Can this kit be used with non-ABB panels?

  Compatibility depends on the mechanical dimensions and mounting requirements of the installed panel system.

• Does the OPMP-01 require firmware configuration?

  No. This component is entirely mechanical and does not contain programmable memory or firmware.

• What materials are used in the mounting components?

  The spacer bushings use Nylon PA66, while locking nuts and washers use zinc-plated metal components.

• Is electrical grounding provided through this mounting kit?

  No. The kit does not provide electrical grounding paths. Grounding must be handled by the equipment installation design.

• What temperature range can the OPMP-01 operate in?

  The specified operating temperature range is -30 deg C to +60 deg C.

• Does the OPMP-01 include an operator panel?

  No. The kit only provides mechanical mounting hardware for compatible ABB panel installations.