{"product_id":"330902-00-40-10-02-00-bently-nevada-proximity-probes-3300-nsv-series","title":"330902-00-40-10-02-00 Bently Nevada Proximity Probes 3300 NSv Series","description":"\u003cp\u003eConfigured for high-precision vibration monitoring in 3300 NSv system platforms, the \u003cstrong\u003eBently Nevada 330902-00-40-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330902\u003c\/strong\u003e Proximity Probe) provides direct physical and electrical execution for small-target displacement sensing. This transducer utilizes non-contact eddy-current technology to detect shaft orbital motion and position within restricted-clearance mechanical assemblies. The hardware facilitates signal transduction from the monitored target to the Proximitor sensor, ensuring precise voltage representation of physical movement for real-time monitoring and diagnostic analysis.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e330902: 3300 NSv Proximity Probe\u003c\/li\u003e\n\u003cli\u003e00: Minimum unthreaded length\u003c\/li\u003e\n\u003cli\u003e40: 4.0 inches (101.6 mm) overall case length\u003c\/li\u003e\n\u003cli\u003e10: 1.0 meter (39.4 inches) total length\u003c\/li\u003e\n\u003cli\u003e02: Miniature coaxial ClickLoc connector\u003c\/li\u003e\n\u003cli\u003e00: Agency approval not required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330902-00-40-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e62.0 x 1.0 x 1.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Proximitor powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThreading\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial with armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and TSI Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv system is optimized for smaller target geometries where standard 8 mm transducers lack spatial resolution. Proper eddy-current probe scaling is necessary to maintain signal linearity. Technicians must perform gap voltage validation during setup, targeting -10 VDC to ensure optimal rotor dynamics tracking. Cross-talk suppression is maintained through internal shielding, which prevents interference from external electrical noise. Correct placement is necessary to avoid signal reflections, as the NSv probe tip size requires a smaller magnetic field envelope to provide accurate orbital data without interference from adjacent metallic surfaces.\u003c\/p\u003e\n\u003ch3\u003eOrdering info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330902-00-40-10-02-00 Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Technical documentation package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProbe Mounting:\n\u003cul\u003e\n\u003cli\u003eInstall using the 1\/4-28 UNF threads into a mounting bracket; avoid overtightening to prevent damage to the probe housing.\u003c\/li\u003e\n\u003cli\u003eMaintain a clearance of at least 3 times the probe tip diameter from metallic obstructions to prevent side-view interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring and Connections:\n\u003cul\u003e\n\u003cli\u003eEnsure the ClickLoc connector is fully seated and locked to prevent intermittent signal continuity caused by machine vibration.\u003c\/li\u003e\n\u003cli\u003eRoute the armored cable through protected paths, ensuring the bend radius does not fall below the manufacturer's specified minimum.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSignal Validation:\n\u003cul\u003e\n\u003cli\u003eVerify the gap voltage at the Proximitor terminals after installation to confirm proper sensor-to-target distance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can this probe be used in place of a standard 8 mm 3300 XL probe?\u003c\/p\u003e\n\u003cp\u003eA: No. The NSv system uses different signal conditioning and scaling factors; they are not interchangeable with standard 3300 XL components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the benefit of the 1\/4-28 UNF thread?\u003c\/p\u003e\n\u003cp\u003eA: It allows for installation in confined spaces or on small-diameter shafts where larger probes would be physically incompatible.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How do I identify the proper gap voltage?\u003c\/p\u003e\n\u003cp\u003eA: The probe output should be checked at the Proximitor to ensure the bias voltage matches the -10 VDC target required for the 3300 NSv system calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the armor on this cable field-removable?\u003c\/p\u003e\n\u003cp\u003eA: No. The armor is integrated into the cable assembly and is not designed for field modification or removal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can the cable be spliced if it is too long?\u003c\/p\u003e\n\u003cp\u003eA: Splicing is prohibited. Any alteration to the cable length will modify its electrical impedance and invalidate the system calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How is the probe protected against high-frequency interference?\u003c\/p\u003e\n\u003cp\u003eA: The probe and extension cable use high-quality coaxial shielding to suppress cross-talk and ambient electromagnetic noise.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the NSv system compatible with 3300 XL monitoring racks?\u003c\/p\u003e\n\u003cp\u003eA: The NSv probe requires a compatible 3300 NSv Proximitor; ensure the system architecture is correctly matched before installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Why is the probe tip sensitive to nearby metal?\u003c\/p\u003e\n\u003cp\u003eA: As an eddy-current device, the magnetic field interacts with any conductive material; proper clearance is necessary to avoid measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026823205037,"sku":"330902-00-40-10-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian11_7bacdf36-be2b-49f8-9547-d09493adbeb3.jpg?v=1782789478","url":"https:\/\/www.maxwellplc.com\/ga\/products\/330902-00-40-10-02-00-bently-nevada-proximity-probes-3300-nsv-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}