{"product_id":"330901-10-25-10-02-00-bently-nevada-3300-nsv-series-proximity-probe","title":"330901-10-25-10-02-00 Bently Nevada 3300 NSv Series Proximity Probe","description":"\u003cp\u003eConfigured for precision displacement monitoring, the \u003cstrong\u003eBently Nevada 330901-10-25-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330901-10-25-10-02-00\u003c\/strong\u003e Proximity Probe) provides direct physical signal execution for measuring shaft radial motion in constrained mechanical environments.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e330901: Base Model (3300 NSv Proximity Probe)\u003c\/li\u003e\n\u003cli\u003e10: 1.0 meter (39 in) total length\u003c\/li\u003e\n\u003cli\u003e25: 2.5 in case length (1.0 in minimum unthreaded)\u003c\/li\u003e\n\u003cli\u003e10: 1\/4-28 UNF thread, no armor\u003c\/li\u003e\n\u003cli\u003e02: Miniature coaxial ClickLoc connector with connector protector\u003c\/li\u003e\n\u003cli\u003e00: No agency approval required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330901-10-25-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e20.3 x 22 x 3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Powered by Proximitor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eStandard coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and Transducer Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv transducer system is optimized for small-diameter shaft applications. Precise eddy-current probe scaling is required to maintain linear output for displacement measurements. During installation, gap voltage validation against -10 VDC targets ensures the probe operates within its linear measurement range. The system design incorporates cross-talk suppression, enabling high-density probe mounting on limited surface areas. Rotor dynamics data integrity is maintained by the shielded ClickLoc connector interface, which minimizes signal degradation and prevents environmental contamination in industrial monitoring installations.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330901-10-25-10-02-00 Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x ClickLoc connector protector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical Mounting: Thread the 1\/4-28 UNF probe into the mounting bracket; ensure a minimum of 5 threads of engagement for structural stability.\u003c\/li\u003e\n\u003cli\u003eGap Setting: Use a feeler gauge or depth micrometer to set the probe gap; target a -10 VDC signal when the shaft is at its nominal mid-range position.\u003c\/li\u003e\n\u003cli\u003eCabling: Use only the supplied 1.0 meter coaxial cable; avoid sharp bends and route away from high-power electromagnetic sources to prevent noise induction.\u003c\/li\u003e\n\u003cli\u003eGrounding: Ensure the probe body is electrically connected to the machine frame; avoid creating ground loops if the probe housing must be isolated from the machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is the 3300 NSv series preferred for small shafts?\u003c\/p\u003e\n\u003cp\u003eThe NSv probe design offers a smaller sensing element than standard 8 mm probes, providing superior linearity and range for shafts smaller than 1 inch in diameter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I shorten the 1.0 meter cable?\u003c\/p\u003e\n\u003cp\u003eNo, the system is factory-calibrated as a complete set including the specific probe, extension cable, and Proximitor sensor; shortening the cable will introduce signal error.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the connector protector necessary?\u003c\/p\u003e\n\u003cp\u003eYes, the protector prevents oil and debris from entering the ClickLoc connector, maintaining electrical contact integrity in harsh machine environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow do I verify the probe is functioning correctly?\u003c\/p\u003e\n\u003cp\u003eCheck the output voltage at the Proximitor sensor terminals; it should remain within the expected range for the given gap distance during static shaft conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the probe polarity sensitive?\u003c\/p\u003e\n\u003cp\u003eThe eddy-current sensor is not polarity sensitive, but signal transmission requires proper coaxial shielding connections to the associated Proximitor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat determines the unthreaded length requirement?\u003c\/p\u003e\n\u003cp\u003eThe 1.0 inch minimum unthreaded length ensures that the probe tip is sufficiently clear of the mounting bracket to avoid parasitic inductance and measurement non-linearity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this probe be used with standard 8 mm Proximitor sensors?\u003c\/p\u003e\n\u003cp\u003eNo, the 3300 NSv probe must be paired with the matching NSv Proximitor sensor to ensure correct frequency and voltage output characteristics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the ClickLoc connector simplify field maintenance?\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc design provides a secure, locking mechanical connection that can be quickly disconnected for maintenance without the need for specialized tools.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026787946669,"sku":"330901-10-25-10-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian--1_7fc4a278-938a-472c-a32d-7a5238d5421e.jpg?v=1783407435","url":"https:\/\/www.maxwellplc.com\/ga\/products\/330901-10-25-10-02-00-bently-nevada-3300-nsv-series-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}