{"product_id":"330106-xx-xx-10-02-00-bently-nevada-reverse-mount-proximity-probe-3300-xl-series","title":"330106-XX-XX-10-02-00 Bently Nevada Reverse Mount Proximity Probe 3300 XL Series","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330106-XX-XX-10-02-00\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330106\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eReverse Mount Proximity Probe, operates as a dedicated hardware component for non-contact shaft vibration and position displacement measurements within 3300 XL Proximity Transducer System platforms. The probe executes physical-to-electrical signal transduction via eddy-current proximity sensing principles. It outputs a continuous voltage proportional to the dynamic or static gap distance between the unshielded tip and a target conductive surface.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Matrix \u0026amp; Option Codes\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330106\u003c\/strong\u003e: Base model for 3300 XL 8 mm reverse mount proximity probe featuring M10 x 1 metric mounting threads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eFirst XX\u003c\/strong\u003e: Unthreaded length configuration option, determined by specific machine housing geometry.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSecond XX\u003c\/strong\u003e: Overall case length option, matched to structural mounting requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10\u003c\/strong\u003e: 1.0 meter (3.3 feet) total cable length option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector configuration without connector protector.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Agency approval option indicating no hazardous area certifications required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330106-XX-XX-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.32 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e26.0 cm x 18.0 cm x 5.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eControlled via Proximitor Sensor (-17.5 VDC to -26 VDC, 12 mA maximum current draw)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSystem Linear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils) beginning at approximately 0.25 mm (10 mils) from the tip\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eNominal Sensitivity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when calibrated against AISI 4140 steel target\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnector Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMiniature coaxial ClickLoc mechanical connector\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eM10 x 1 metric mechanical mounting threads\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Tip Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePolyphenylene Sulfide (PPS) engineered thermoplastic\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCase Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 303 or 304 stainless steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTarget Output Resistance\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e50 Ohm nominal system impedance\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Transducer Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe probe utilizes high-frequency eddy-current field interaction to achieve sub-micron displacement resolution without mechanical contact. Calibration verification relies on precise gap voltage validation, targeting a nominal -10 VDC offset value corresponding to the center of the calibrated 80 mil linear range.\u003c\/p\u003e\n\u003cp\u003eThe structural design incorporates cross-talk suppression geometry to prevent electromagnetic interference when multiple 3300 XL 8 mm probes are installed in close physical proximity for orthogonal X-Y radial vibration monitoring or redundant thrust position tracking. This maintains signal integrity during high-velocity rotor dynamics transitions.\u003c\/p\u003e\n\u003ch3\u003ePackaging \u0026amp; Ordering Details\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Bently Nevada 330106-XX-XX-10-02-00 Reverse Mount Proximity Probe assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Factory-installed miniature coaxial ClickLoc connector interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Integral low-loss coaxial cable structure matching the 1.0 meter specification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring Framework\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torquing Limits\u003c\/strong\u003e: Do not exceed a maximum installation torque of 22.6 N-m (200 in-lbf) during reverse-mount installation. The recommended standard tightening torque is 7.5 N-m (66 in-lbf).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConduit and Isolation Rules\u003c\/strong\u003e: Route the integral probe cable through dedicated, grounded metal conduit. Ensure full isolation from power distribution lines and variable frequency drive output cables to block electromagnetic noise induction.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum Bend Radius Constraints\u003c\/strong\u003e: Maintain a strict minimum bend radius of 25.4 mm (1.0 inch) across all sections of the coaxial cable during final physical installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Performance FAQ\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the specific target gap voltage for system calibration?\u003c\/p\u003e\n\u003cp\u003eThe target orientation gap voltage is -10 VDC, which corresponds to the geometric center of the linear calibration span when evaluating standard AISI 4140 steel shafts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this proximity probe be hot-swapped while the Proximitor is energized?\u003c\/p\u003e\n\u003cp\u003eYes, the passive coaxial connection allows hot-swapping. Disconnecting the coaxial line will drive the Proximitor output to its upper limit but will cause no damage to the electronics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the maximum rated pressure sealing capability of the probe tip?\u003c\/p\u003e\n\u003cp\u003eThe probe tip is sealed with a Viton O-ring to withstand differential machine case pressures, but it is not factory tested or certified for high-pressure process boundary isolation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the connector option affect extension cable compatibility?\u003c\/p\u003e\n\u003cp\u003eThe miniature coaxial ClickLoc connector interfaces directly with any standard 3300 XL extension cable, ensuring complete electrical and mechanical cross-compatibility without individual matching.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat occurs if the mechanical installation torque exceeds 22.6 N-m?\u003c\/p\u003e\n\u003cp\u003eExceeding the maximum torque specification risks mechanical distortion of the stainless steel probe body, which can damage the internal coaxial solder joints and compromise the sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does temperature variation alter the system output sensitivity?\u003c\/p\u003e\n\u003cp\u003eThe 3300 XL system exhibits a low thermal drift profile, remaining fully compliant with API 670 standards for scale factor stability across the entire -51 to +177 deg C operating range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs an external power supply connected directly to this probe?\u003c\/p\u003e\n\u003cp\u003eNo, the probe receives a high-frequency radio frequency drive signal directly from the associated Proximitor module. It does not connect to external DC or AC power rails.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy does this model exclude an external armor layer?\u003c\/p\u003e\n\u003cp\u003eThe 330106 reverse mount model relies on internal sleeve mounting or external conduit structures for mechanical isolation, eliminating the need for bulky integrated flexible armor layers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518763360429,"sku":"330106-XX-XX-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330106-xx-xx-10-02-00-modified-model-ee4u0aeyp5e.jpg?v=1766977062","url":"https:\/\/www.maxwellplc.com\/ga\/products\/330106-xx-xx-10-02-00-bently-nevada-reverse-mount-proximity-probe-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}