The Bently Nevada 330101-00-65-10-11, also cataloged as the 330101 Proximity Probes, operates as a dedicated hardware component for non-contacting displacement, vibration, and speed measurements within TSI platforms.

Physical and Performance Specifications

Eddy-Current Probe Scaling and Rotor Dynamics Tracking

The 330101-00-65-10-11 operates via eddy-current probe scaling metrics optimized for standard AISI 4140 steel target tracks. The internal electromagnetic coil inside the 8 mm tip reacts to proximity variations, altering the high-frequency RF envelope generated by the baseline Proximitor interface. For precise rotor dynamics tracking, the installation must satisfy standard gap voltage validation (-10 VDC targets nominal, typically matching a physical spacing of 1.27 mm or 50 mils). This positioning places the hardware loop within the linear measurement sector, enabling real-time detection of radial vibration amplitudes and axial thrust displacement without signal clipping or phase lag distortions.

Technical Query Resolution

Q: Does the 1.0 meter FluidLoc cable require an additional extension cable for 1-meter Proximitor systems?

A: No. The 1.0 meter integral cable configuration connects directly to a 1.0 meter system Proximitor sensor without using intermediate hardware junctions.

Q: How does the FluidLoc cable configuration affect deployment inside machine cases?

A: The FluidLoc variant blocks internal oil or fluid migration along the interior conductors of the cable, preserving insulation resistance when routing through wet or high-pressure compressor and turbine inner casings.

Q: What are the hazardous area installation compliance ratings for this probe assembly?

A: This hardware series maintains international safety certifications including CSA, ATEX, and IECEx approvals for deployment in classified hazardous industrial zones.

On-Site Assembly and Alignment Directives

• Verify that the target machine casing or probe sleeve matches the 3/8-24 UNF thread configuration.

• Inspect the unarmored 6.5-inch case path to ensure zero physical interference or binding during rotational insertion.

• Thread the probe body into the holder manually, tracking distance to avoid blunt impact against the shaft target surface.

• Apply an external voltmeter across the corresponding Proximitor out terminals to track the loop parameter state.

• Adjust physical depth until obtaining the baseline gap voltage validation target of -10 VDC (or matching application datasheet calibration spec).

• Tighten the locknut to standard engineering torque thresholds for 3/8-24 threads without straining the case structure.

• Route the 1.0 meter FluidLoc cable, keeping above minimum bend radius limits and isolating the ClickLoc connector from grounding contact.

Shipping Configuration Details

• Bently Nevada 330101-00-65-10-11 8 mm Proximity Probe

• Integral 1.0 meter FluidLoc cable with ClickLoc connector

• Factory connector protection boot

Logistics and Courier Dispatch

Delivery time: 2-7 days when payment finish via premium priority channels including DHL, FEDEX, and UPS. All units are locked inside secure anti-static industrial packaging to maintain electrical isolation properties and protect the unarmored casing segments against impact damage during cross-border transit.