{"product_id":"32000-28-05-06-020-07-02-bently-nevada-32000-series-proximity-probe-housing-assemblies","title":"32000-28-05-06-020-07-02 Bently Nevada 32000 Series Proximity Probe Housing Assemblies","description":"\u003cp\u003eConfigured for protective containment and external transducer adjustment in rotating machinery monitoring systems, the \u003cstrong\u003eBently Nevada 32000-28-05-06-020-07-02\u003c\/strong\u003e (\u003cstrong\u003e32000\u003c\/strong\u003e Proximity Probe Housing Assemblies) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Selection Matrix\u003c\/h3\u003e\n\u003cp\u003eThe individual configuration elements of the 32000-28-05-06-020-07-02 metric housing assembly are defined by the following suffix parameters:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32000\u003c\/strong\u003e: Base model designation for extended temperature proximity probe housing assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-28\u003c\/strong\u003e: Factory-installed 3300 XL 8 mm proximity probe with multiple hazardous area approvals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-05\u003c\/strong\u003e: Integrated probe cable length of 0.5 meter (20 inches).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-06\u003c\/strong\u003e: Standoff adapter length of 60 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-020\u003c\/strong\u003e: Probe penetration depth of 20 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-07\u003c\/strong\u003e: Conduit fittings option consisting of one PG21 x M20 fitting and two plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-02\u003c\/strong\u003e: Main housing mounting thread size of 3\/4-14 NPT (NP).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical \u0026amp; Physical Parameters\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e32000-28-05-06-020-07-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e37.0 x 9.0 x 8.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-62 to +204 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive housing (Integral probe powered by external Proximitor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Dome Material\u003c\/td\u003e\n\u003ctd\u003eGlass-reinforced polyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetal Sleeve Material\u003c\/td\u003e\n\u003ctd\u003eCorrosion-resistant stainless steel and Inconel 718 alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegral Probe Type\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Compliance\u003c\/td\u003e\n\u003ctd\u003eFully compliant with API 670 standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation and Rotor Dynamics Integration\u003c\/h3\u003e\n\u003cp\u003eThe 32000-28-05-06-020-07-02 assembly integrates a 3300 XL 8 mm probe inside a high-temperature dome, providing continuous measurement data for rotor dynamics monitoring. The target displacement is captured via high-frequency eddy-current probe scaling, outputting an analog signal to a companion 3300 XL Proximitor Sensor.\u003c\/p\u003e\n\u003cp\u003eFor proper integration into machinery protection systems, the field engineer must execute a physical gap voltage validation. The nominal target is set to -10 VDC, corresponding to the electrical midpoint of the transducer's linear performance curve. This design ensures that static axial movement or dynamic radial vibration remains centered within the calibrated -2 VDC to -18 VDC operating window, preventing signal clipping or dynamic range saturation during transient rotor events.\u003c\/p\u003e\n\u003ch3\u003eShipping Checklist\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Bently Nevada 32000-28-05-06-020-07-02 housing assembly with pre-installed 3300 XL probe\u003c\/li\u003e\n\u003cli\u003e1 x PG21 to M20 conduit fitting adapter\u003c\/li\u003e\n\u003cli\u003e2 x Conduit port plugs\u003c\/li\u003e\n\u003cli\u003e1 x O-ring seal kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread and Seal Preparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply thread sealant to the 3\/4-14 NPT mounting threads. Thread the housing assembly into the machine casing, verifying correct engagement of the 60 mm standoff adapter and the 20 mm penetration path.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Gap Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove the external PPS dome to expose the probe adjustment sleeves. Connect a digital voltmeter to the Proximitor terminal loop and rotate the internal adjustment sleeve until the DC gap voltage registers -10 VDC.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLocking the Position\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSecure the locknut once the target -10 VDC calibration point is achieved. Use standard industrial torque specifications to prevent the sleeve from shifting under mechanical vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConduit Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute the 0.5 m probe cable out through the PG21 x M20 fitting. Plug all unused conduit ports on the housing with the two provided plugs to maintain environmental sealing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransducer Housing FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCan the internal probe be replaced without shutting down the machinery?\u003c\/p\u003e\n\u003cp\u003eYes, the housing design permits external access to the probe and extension cable, enabling adjustment or replacement without dismantling the machine casing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the temperature limit for the 32000 series housing assembly?\u003c\/p\u003e\n\u003cp\u003eThe 32000 series offers an extended temperature range of -62 to +204 deg C, suitable for higher temperature zones than the 31000 series.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs this housing assembly compliant with API 670 standards?\u003c\/p\u003e\n\u003cp\u003eYes, this assembly is fully compliant with the American Petroleum Institute's API 670 standard for externally mounted proximity probe housings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this 20 mm probe penetration configuration require an internal support sleeve?\u003c\/p\u003e\n\u003cp\u003eNo, sleeve supports are only required for deep penetrations exceeding 305 mm (12 inches) to prevent mechanical resonance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat target material is standard for the 3300 XL 8 mm probe calibration?\u003c\/p\u003e\n\u003cp\u003eStandard calibration is configured for AISI 4140 steel. Other target materials will alter the nominal 200 mV\/mil scale factor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the housing dome constructed from?\u003c\/p\u003e\n\u003cp\u003eThe dome is made of high-strength polyphenylene sulfide (PPS), providing excellent chemical resistance and environmental sealing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow should the outer shield of the extension cable be grounded?\u003c\/p\u003e\n\u003cp\u003eThe outer shield must be grounded at one point only, typically at the system monitor rack, to prevent ground loop interference.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy does this specific configuration utilize a standoff adapter?\u003c\/p\u003e\n\u003cp\u003eThe 60 mm standoff adapter is utilized to adjust the probe casing position when the machine wall thickness is thin or when clearance is required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025401499821,"sku":"32000-28-05-06-020-07-02","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian-59_77eb7f89-d583-45fa-8a63-f44da751087e.jpg?v=1784276730","url":"https:\/\/www.maxwellplc.com\/ga\/products\/32000-28-05-06-020-07-02-bently-nevada-32000-series-proximity-probe-housing-assemblies","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}