{"product_id":"1tge102019r4800-abb-interfaces-module-m-system-series","title":"1TGE102019R4800 ABB Interfaces Module M-System Series","description":"\u003cp\u003eConfigured for signal translation and power distribution in DCS architectures, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eABB 1TGE102019R4800\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e1TGE102019R4800\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInterfaces Module) provides direct physical\/electrical execution. This module integrates Modbus RTU (via RS485) and Modbus TCP\/IP (via Ethernet) protocols, enabling bidirectional communication between field devices and host controllers. It converts incoming power to a regulated 24 VDC output while maintaining 1500 VAC isolation to protect against ground loops and transients. The hardware facilitates deterministic data exchange at 10\/100 Mbps, ensuring compatibility with standard industrial networking requirements.\u003c\/p\u003e\n\u003ch3\u003eHardware Identification\u003c\/h3\u003e\n\u003cp\u003eThe 1TGE102019R4800 is a discrete interface component. There are no configurable hardware sub-suffixes or modular variations provided for this specific part number.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1TGE102019R4800\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eABB\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSweden\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.7 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e23.8 x 17 x 10.3 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-25 deg C to +70 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e24 VDC nominal\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCommunication Ports\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eRJ45 Ethernet, RS485\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eIsolation Voltage\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1500 VAC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIndustrial Control Integration\u003c\/h3\u003e\n\u003cp\u003eThe module is engineered to operate within ABB PLC and DCS environments, where backplane bus communication velocity and I\/O density scaling are required to maintain system synchronicity. It supports firmware flash compatibility to allow for updates to communication stacks and protocol handling logic. The integration of deterministic networks ensures that protocol conversion latencies remain within bounds defined for high-speed process control. The module logic includes diagnostic registers accessible via Modbus to facilitate health monitoring of the communication link and internal voltage rails.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1TGE102019R4800 Interfaces Module\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStatic-shielded packaging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTechnical documentation\/manual\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo external power cables or communication patch cords included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMounting: Utilize standard DIN-rail mounting; ensure the unit is snapped firmly onto the rail to maintain structural stability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGrounding: Connect the chassis ground terminal to the main cabinet ground bus using a low-impedance conductor to satisfy surge protection requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWiring: Ensure RS485 A\/B lines are terminated with a 120 Ohm resistor at both ends of the physical bus to prevent signal reflections.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSeparation: Route Ethernet and RS485 cables at least 10 cm away from high-voltage AC power lines to reduce electromagnetic noise coupling.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnvironment: Install within a clean environment to ensure heat dissipation through the module housing, keeping vents unobstructed.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does the module support hot-swap behavior?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: No, the system must be de-energized before removing or installing the module to prevent electrical damage to the communication bus and backplane interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the maximum load capacity for the 24 VDC output?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: The output capacity is limited to the module's rated power budget; check the current draw of connected field devices against the module nameplate specifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How is the IP address configured?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: Network parameters for the Modbus TCP\/IP port are configured via the system software or the onboard diagnostic interface during commissioning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can RS485 and Ethernet be used simultaneously?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: Yes, the module is designed to bridge data between the Modbus RTU (RS485) and Modbus TCP\/IP (Ethernet) networks concurrently.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the Ethernet port auto-negotiating?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: Yes, the 10\/100 Mbps port supports auto-negotiation for duplex and speed settings based on the connected network switch capabilities.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does the module require periodic firmware maintenance?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: Firmware should be updated only if specific protocol compatibility or stability improvements are identified by the system management software.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the purpose of the 1500 VAC isolation?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: The isolation barrier separates the field-side signaling circuitry from the internal system logic, preventing high-voltage surges from causing equipment damage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the RS485 port isolated?\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA: Yes, the RS485 interface is electrically isolated to prevent ground potential differences between remote field nodes and the control cabinet.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":45231178612909,"sku":"1TGE102019R4800","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/abb-1tge102019r4800-interfaces-module-hvc4xh4fqbv_e0d0415d-b42e-4d93-8084-5e19a7c36539.jpg?v=1762942321","url":"https:\/\/www.maxwellplc.com\/ga\/products\/1tge102019r4800-abb-interfaces-module-m-system-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}