{"product_id":"1794-acn15-allen-bradley-communication-adapter-flex-i-o","title":"1794-ACN15 Allen-Bradley Communication Adapter FLEX I\/O","description":"\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley 1794-ACN15\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e1794-ACN15\u003c\/strong\u003e Flex I\/O communication adapter, operates as a dedicated hardware component for ControlNet network interfacing within FLEX I\/O platforms. The module manages the physical layer conversion and cyclic data transfer protocols between the high-speed ControlNet coax media and the localized backplane bus. It functions as the remote node manager, sequencing up to eight connected I\/O terminal bases without inserting processing degradation into the digital or analog control loops.\u003c\/p\u003e\n\u003ch3\u003eSuffix Nomenclature and Hardware Series\u003c\/h3\u003e\n\u003cp\u003eThe primary catalog identifier defines the basic physical interface configuration, while the sequential letter suffixes track hardware modifications. The baseline alphanumeric configuration designates a standard ControlNet non-redundant media interface operating via BNC coax terminations. Suffix identifiers such as \/A, \/B, \/C, and \/D mark specific production revisions, governing internal component updates and matching firmware flash compatibility rules across different processor revision levels.\u003c\/p\u003e\n\u003ch3\u003ePhysical and Electrical Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e1794-ACN15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e9.4x8.7x6.9cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eSupported by 24 VDC external source input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e19.2 to 31.2 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexbus Output Current\u003c\/td\u003e\n\u003ctd\u003e640 mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Voltage\u003c\/td\u003e\n\u003ctd\u003e850 VDC between network and logic circuits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20 open-style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003eDIN rail tracking layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Backplane Data Routing\u003c\/h3\u003e\n\u003cp\u003eThis module governs the local I\/O density scaling capacity by executing predictable data transfers across the internal bus structure. The unit enforces backplane bus communication velocity Licences protocols to maintain timed updates between the controller image and the remote physical channels. It structures synchronous communication frames across the backplane loop, ensuring deterministic behavior over industrial control networks while avoiding data corruption when handling combinations of high-density discrete and analog sub-modules.\u003c\/p\u003e\n\u003ch3\u003ePackage Component Checklist\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 1794-ACN15 adapter hardware unit\u003c\/li\u003e\n\u003cli\u003e1 x installation instruction document\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Protocols\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDIN Rail Attachment Strategy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHook the upper slot of the adapter base onto the top of the DIN rail, then pivot the module downward until the zinc-plated locking spring snaps securely onto the tracking line.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Coaxial Connection Matrix\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlign the internal pins of the BNC connector with the dual slots of the ControlNet tap cable plug, press firmly together, and twist the outer ring 90 degrees clockwise to engage the lock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePower Supply Termination Steps\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRoute 24 VDC wires into the designated positive and negative terminal clamp positions, tightening the set screws to prevent local impedance variations or power failure states.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSub-module Interlock Alignment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSlide the adjacent terminal base firmly along the side grooves of the adapter housing to ensure the internal multi-pin backplane bus header seats parallel with zero pin deflection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat specific limitations govern the hot-swap capability of this module while the backplane loop is energized?\u003c\/p\u003e\n\u003cp\u003eThe communication adapter cannot be removed while the system is under power. Removing the adapter opens the local backplane loop, immediately faulting all downstream I\/O bases.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the maximum Flexbus current limit restrict the number of modules attached to this adapter?\u003c\/p\u003e\n\u003cp\u003eThe internal power regulator delivers up to 640 mA. The combined logic current draw of all connected modules must not exceed this value, or the adapter will shut down.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat failure signature indicates that the module has dropped offline due to a network configuration mismatch?\u003c\/p\u003e\n\u003cp\u003eA data mismatch causes the status indicators to flash red or amber, and the master controller logs an I\/O configuration fault, freezing current output states.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this specific unit support media redundancy configuration using dual trunk lines?\u003c\/p\u003e\n\u003cp\u003eNo. The standard non-redundant configuration features a single network BNC connector port, requiring a single path connection layout rather than the dual-port redundancy setup.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the ControlNet station node address mechanically assigned on the hardware interface?\u003c\/p\u003e\n\u003cp\u003eThe address is configured using two rotary switches located on the front face of the enclosure, allowing values between 01 and 99 to be indexed prior to mounting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat step is required to address a flash memory conflict when matching components with older processors?\u003c\/p\u003e\n\u003cp\u003eThe adapter version must match the electronic keying in the controller software, requiring a firmware update via the control network if revision incompatibility is flagged.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the isolation path between the communication link and the 24 VDC input circuit fused?\u003c\/p\u003e\n\u003cp\u003eThe 850 VDC isolation is achieved via internal optocouplers and transformers. The 24 VDC power terminals require external current-limiting fuses to prevent hardware degradation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this adapter operate within environments where industrial moisture condensation is present?\u003c\/p\u003e\n\u003cp\u003eNo. The open-style IP20 housing lacks moisture seals, requiring installation within a climate-controlled enclosure that maintains non-condensing relative humidity conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen-Bradley","offers":[{"title":"Default Title","offer_id":46066455838893,"sku":"1794-ACN15","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/1794-ACN15_25.jpg?v=1784509054","url":"https:\/\/www.maxwellplc.com\/ga\/products\/1794-acn15-allen-bradley-communication-adapter-flex-i-o","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}