Configured for high-frequency RF signal propagation in Machinery Protection Systems, the Bently Nevada 16710-27 (16710-27 Interconnect Cable) provides direct physical/electrical execution. This passive coaxial cable serves as the pre-calibrated intermediate transmission link that routes analog displacement data between an eddy-current proximity probe head and a remote Proximitor sensor conditioning driver without inducing phase shift or impedance degradation across the circuit pathway.

Loop Interface Performance Matrix

Eddy-Current Probe Scaling and Interface Boundary Control

The 27.0-meter physical length of this 95-\Omega coaxial cable assembly is strictly matched to specific circuit capacitance and inductance constants per unit length. Maintaining these physical tolerances keeps the calibrated eddy-current probe scaling linear during full dynamic machine operation. This stable electrical profile enables precise field gap voltage validation targeting standard -10 VDC operational centers, while the dense outer braided shield achieves the required cross-talk suppression boundaries across close-positioned radial sensors tracking high-velocity rotor dynamics.

Loop Interface Technical Diagnostics

Q: What precise electrical data modifications result if the 16710-27 cable is shortened during field installation?

A: Cutting the cable alters the total loop capacitance and circuit resistance. This shift modifies the operational tuning frequency of the primary driver oscillator, invalidating the factory-calibrated eddy-current probe scaling and rendering the displacement measurements inaccurate.

Q: How does a leakage path to the machine frame affect the raw vibration channel?

A: If the outer shield compromises its insulation layer and contacts the metallic machine housing, it forms a parasitic ground loop. This electrical path introduces stray industrial noise, corrupting the static gap voltage validation and inserting false spikes into the dynamic signal output.

Q: Can this interconnect line be uncoupled while the monitor rack channel is fully energized?

A: Yes. Uncoupling the physical coaxial connection causes no electrical hardware damage. However, breaking the transmission loop forces the Proximitor voltage output to instantly saturate to its maximum negative limit, which trips active machine trip interlocks unless the channel bypass state is active.

Mechanical Routing and Installation Layout

• Physical Bend Constraints: Maintain a minimum physical bend radius of 25.4 mm along the entire installation path. Kinking or pulling the cable past this limit compresses the internal dielectric core, permanently distorting the 95-\Omega characteristic impedance.

• Connection Environmental Shielding: Torque the miniature coaxial connections to factory specifications using a connector wrench. Slide a dedicated connector protector sleeve over the mated joint or wrap the terminal link in clear self-fusing insulation tape to isolate it from the junction box frame.

• Conduit Segregation Protocol: Route the extension cable inside dedicated rigid or flexible liquid-tight steel conduits. Do not pull this high-frequency signal line through wireways or trays that contain high-voltage AC motor lines or variable frequency drive switching circuits.

Kit Components Inventory

• 1 x Bently Nevada 16710-27 Coaxial Interconnect Cable

• 1 x Engineering Terminal Schematic Sheet

• Note: Proximity sensor tips, active Proximitor drivers, and flexible bulkhead seals are excluded from this core package and must be acquired separately.

Package Dispatch Logistics

Delivery time: 2-7 days when payment finish verification is logged in the processing database. Dispatches route directly from the Xiamen, China transit node via express international transport handlers including DHL, FEDEX, or UPS. The hardware items travel protected inside heavy-duty anti-static industrial packaging enclosures layered inside rigid shock-insulated cartons with moisture desiccant packets to prevent physical deformation or electrostatic degradation during transit.