{"product_id":"omron-cs1w-etn21-ethernet-unit-cs1","title":"CS1W-ETN21 | Omron | Unidad Ethernet (tipo 100BASE-TX)","description":"\u003cp\u003eConfigured for high-speed industrial Ethernet communication in Omron CS1 controller racks, the \u003cstrong\u003eOmron CS1W-ETN21\u003c\/strong\u003e (\u003cstrong\u003eCS1W-ETN21\u003c\/strong\u003e Ethernet Unit) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eFunctional Class Breakdown\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCS1W Prefix\u003c\/strong\u003e: Denotes specialized system interface unit compatibility designed for CS1 rack backplanes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETN Communication Identifier\u003c\/strong\u003e: Indicates high-speed Ethernet protocol controller interface hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21 Physical Transceiver Variant\u003c\/strong\u003e: Specifies 100BASE-TX \/ 10BASE-T twisted-pair cable media connection via standard RJ45 port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCS1W-ETN21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOmron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e15.0 x 13.0 x 4.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +75 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e0.40 A at 5 VDC (internal backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Layer\u003c\/td\u003e\n\u003ctd\u003e100BASE-TX \/ 10BASE-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Speed\u003c\/td\u003e\n\u003ctd\u003e100 Mbps \/ 10 Mbps (auto-negotiation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia Type\u003c\/td\u003e\n\u003ctd\u003eCategory 5 or higher STP cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Segment Length\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Performance and Backplane Velocity\u003c\/h3\u003e\n\u003cp\u003eThe module offloads protocol handling from the main CPU to ensure consistent backplane bus communication velocity across the internal rack assembly. High firmware flash compatibility allows seamless integration into industrial network topographies without degrading local CPU cycle execution times or disrupting I\/O density scaling routines during concurrent FINS packet exchanges.\u003c\/p\u003e\n\u003ch3\u003eIncluded Box Items\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Omron CS1W-ETN21 Ethernet Unit\u003c\/li\u003e\n\u003cli\u003e1 x Bus Connector Cover Cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Physical Interface Rules\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Interruption Requirement\u003c\/strong\u003e: Always isolate rack power before installing or removing the unit to prevent hardware damage or memory corruption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielded Cabling Standards\u003c\/strong\u003e: Use Category 5e shielded twisted-pair (STP) Ethernet cabling with grounded RJ45 connectors to mitigate EMI noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Slot Seating\u003c\/strong\u003e: Align the rear card edge firmly with the rack slot backplane connector and secure the retention screw to ensure continuous ground reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Constraints\u003c\/strong\u003e: Limit single-segment cable lengths between the Ethernet unit and network switches to a maximum of 100 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Inquiries and Diagnostics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 1: Is hot-swapping permitted for the CS1W-ETN21 module while the rack is powered?\u003c\/p\u003e\n\u003cp\u003eAnswer 1: No, the module does not support hot-swapping; power down the system base unit completely before inserting or removing the hardware.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 2: What power source supplies the electrical requirements of the Ethernet unit?\u003c\/p\u003e\n\u003cp\u003eAnswer 2: The unit draws its 0.40 A operating current directly from the 5 VDC rail supplied by the rack backplane power supply module.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 3: Which network communication protocols are natively executed by the onboard processor?\u003c\/p\u003e\n\u003cp\u003eAnswer 3: The unit natively processes FINS\/UDP, FINS\/TCP, Socket service calls, and FTP server functions across standard TCP\/IP layers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 4: How are node address settings physically configured on the hardware?\u003c\/p\u003e\n\u003cp\u003eAnswer 4: Node numbers are set using the two rotary switches located on the front panel of the module before system power-up.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 5: What causes the RUN LED indicator to remain unlit after power application?\u003c\/p\u003e\n\u003cp\u003eAnswer 5: An unlit RUN LED indicates a hardware initialization failure, improper backplane seating, or a missing 5 VDC power supply rail.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 6: Does the module support automatic MDI\/MDI-X crossover detection on the Ethernet port?\u003c\/p\u003e\n\u003cp\u003eAnswer 6: The 100BASE-TX port requires standard straight-through cables for switch connections and crossover cables for direct node connections.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 7: How does network traffic load impact the CPU scan time of the main controller?\u003c\/p\u003e\n\u003cp\u003eAnswer 7: Network protocol processing occurs asynchronously on the module, minimizing direct execution latency on the main CPU scan cycle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuestion 8: What cable category is recommended for high-noise industrial panel installations?\u003c\/p\u003e\n\u003cp\u003eAnswer 8: Category 5e or higher shielded twisted-pair (STP) cabling with overall braided shield grounding is required for noise immunity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Omron","offers":[{"title":"Default Title","offer_id":47306652713133,"sku":"CS1W-ETN21","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/omron_cs1w-etn21_1.jpg?v=1789450541","url":"https:\/\/www.maxwellplc.com\/es\/products\/omron-cs1w-etn21-ethernet-unit-cs1","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}