{"product_id":"330105-02-12-05-02-15-bently-nevada-proximity-probe-3300-xl-8mm","title":"330105-02-12-05-02-15 Bently Nevada Proximity Probe 3300 XL 8mm","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330105-02-12-05-02-15\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330105\u003c\/strong\u003e Proximity Probe, operates as a dedicated hardware component for non-contacting displacement measurement within 3300 XL 8mm monitoring systems.\u003c\/p\u003e\n\u003ch3\u003eModel Configuration \u0026amp; Suffix Summary\u003c\/h3\u003e\n\u003cp\u003eThe 330105-02-12-05-02-15 defines the physical and connectivity characteristics of the 3300 XL 8mm transducer system:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e330105: 8mm Proximity Probe, 3\/8-24 thread, without armor.\u003c\/li\u003e\n\u003cli\u003e02-12: Probe Case Length, 02 (30mm), Thread Size, 12 (120mm).\u003c\/li\u003e\n\u003cli\u003e05: Total Case Length (30mm).\u003c\/li\u003e\n\u003cli\u003e02: Connector type (Connector with connector protector).\u003c\/li\u003e\n\u003cli\u003e15: Cable length (1.5 meters).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePhysical and Electrical Parameters\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330105-02-12-05-02-15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.25 kg (Approximate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e200 mm x 150 mm x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDriven by Proximitor Sensor (-24 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTSI \u0026amp; Rotor Dynamics Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe 330105-02-12-05-02-15 is engineered for precise rotor position and vibration monitoring. It requires eddy-current probe scaling aligned with a calibrated target material (typically AISI 4140 steel). For optimal linearity, gap voltage validation targets are set at -10 VDC at the mid-linear range. The probe tip and internal coil construction suppress cross-talk during multi-probe installations, ensuring signal integrity when monitoring complex rotor dynamics such as shaft centerline movement and radial vibration orbits.\u003c\/p\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e1 x 330105-02-12-05-02-15 8mm Proximity Probe\u003c\/li\u003e\n\u003cli\u003e1 x Connector Protector\u003c\/li\u003e\n\u003cli\u003e1 x Calibration Data Sheet\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eMounting and Integration Protocols\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the probe is mounted at a 90-degree angle to the target surface to maintain linear response.\u003c\/li\u003e\n\u003cli\u003eUtilize the provided thread engagement for 3\/8-24 mounting fixtures; torque specifications must not exceed 5.6 Nm.\u003c\/li\u003e\n\u003cli\u003eEnsure proper cable routing and strain relief to prevent mechanical fatigue at the probe-to-cable interface.\u003c\/li\u003e\n\u003cli\u003eVerify ground continuity between the probe housing and the mounting bracket to minimize electromagnetic interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Inquiries\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the required gap voltage for this probe?\u003c\/p\u003e\n\u003cp\u003eA: The recommended gap voltage is -10 VDC, corresponding to the middle of the 2 mm linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is this probe compatible with older 3300 system extensions?\u003c\/p\u003e\n\u003cp\u003eA: No, the 3300 XL system requires specific 3300 XL extension cables to ensure correct system impedance and calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can the probe cable be shortened in the field?\u003c\/p\u003e\n\u003cp\u003eA: No, the system is factory calibrated as a matched set. Modifying the cable length will invalidate the calibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the maximum operating temperature for the probe tip?\u003c\/p\u003e\n\u003cp\u003eA: The probe tip is rated for continuous operation up to 177 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How is the probe protected against moisture at the connector?\u003c\/p\u003e\n\u003cp\u003eA: Each unit is supplied with a connector protector to prevent oxidation and moisture ingress during operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does this probe require a specific proximity sensor?\u003c\/p\u003e\n\u003cp\u003eA: Yes, it must be paired with a 3300 XL Proximitor sensor calibrated for this specific probe type.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can I use this probe on non-ferrous targets?\u003c\/p\u003e\n\u003cp\u003eA: Using a non-ferrous target will require a different calibration curve and significantly reduces the linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the purpose of the 8mm probe designation?\u003c\/p\u003e\n\u003cp\u003eA: The 8mm refers to the diameter of the probe tip, which defines the sensing area and the required clearance for the magnetic field.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46781118644397,"sku":"330105-02-12-05-02-15","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xianxian_018_894731f3-7f8c-4919-9da0-81335221e4cd.jpg?v=1783558573","url":"https:\/\/www.maxwellplc.com\/es\/products\/330105-02-12-05-02-15-bently-nevada-proximity-probe-3300-xl-8mm","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}